Netgear WNDR3800 N600 Dual-Band Gigabit Wireless Router Installation Guide
- June 12, 2024
- NETGEAR
Table of Contents
Netgear WNDR3800 N600 Dual-Band Gigabit Wireless Router
**Package Contents
**
Attach the stand to the router:
- Place the stand on a level surface.
- Slide the router onto the stand.
-
Step 1:
Unplug the power to turn off your modem. -
Step 2:
Connect one end of the yellow Ethernet cable ( ) to your modem, and the other end to the Internet port on your router. -
Step 3: Plug in, then turn on your modem.
Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power.
-
Step 4:
Connect the power adapter to the router, then plug it into an outlet. Wait for the 2.4 GHz LED ( )2.4GHz to turn on. If none of the LEDs turn on, make sure that the Power On/Off button is in the ON position (pushed in). -
Step 5: Connect the router to your computer.
Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the bottom label. -
Step 6:
Open a browser.
If the Web page does not display, close and re-open the browser and enter http://routerlogin.net in the address bar, or check the “Troubleshooting” section on the back of this installation guide.
Preset Wireless Security
This product has a unique WiFi network name (SSID) and network key (password).
The default SSID and network key (password) are uniquely generated for every
device (like a serial number), to protect and maximize your wireless security.
This information is located on the label on the bottom of the product. NETGEAR
recommends that you do not change the preset WiFi network name (SSID) and
network key (password). If you do change the settings, the information on the
bottom of the product does not apply.
Find the preset Wireless Settings on your router and record them here:
- WiFi Network Name (SSID) ___
- Network Key (Password ) ____
If you change the preset wireless settings, record it here:
- Wireless Network Name (SSID) ___
- Network Key (Password) _____
If necessary to retrieve or update your password, type http://www.routerlogin.net in a Web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password.
Connect Wireless Devices to Your Router
Choose either the manual or WiFi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network.
Manual Method
-
Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area.
-
Look for the preset NETGEAR wireless network name (SSID), and select it. The preset WiFi network name (SSID) is located on the product label at the bottom of the router.
Note: If you changed the name of your network during the setup process, look for that network name. -
Enter the preset password (or your custom password if you changed it), and click Connect.
-
Repeat steps 1–3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (WiFi Protected Setup)—NETGEAR calls this method Push ‘N’ Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens:
- Press the WPS button on the router.
- Within 2 minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router.
- Repeat this process to add other WPS wireless devices.
Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it will not work.
Troubleshooting
The browser cannot display the Web page.
- Make sure that the PC is connected to one of the four LAN Ethernet ports, or wirelessly to the router.
- Make sure that the router is fully up and running. Its wireless LED should turn on.
- Close and re-open the browser to make sure that the browser does not cache the previous page.
- Browse to http://routerlogin.net.
- If the PC is set to a static or fixed IP address (this is uncommon), change it to obtain an IP address automatically from the router.
Other Features
- For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answers/detail/a_id/11621.
- For GNU General Public License (GPL) related information, please visit http://kbserver.netgear.com/kb_web_files/open_src.asp.
- For additional features, including Live Parental Controls, Traffic Metering, ReadyShare, Guest Access, and others, please log into your router at http://routerlogin.net.
Download the free NETGEAR Genie
Automatically fix common network problems and easily manage your home network connections. http://www.NETGEAR.com/genie
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. ©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
FREQUENTLY ASKED QUESTIONS
What is the maximum wireless speed supported by the Netgear WNDR3800 N600 Dual-Band Gigabit Wireless Router?
The Netgear WNDR3800 router supports a maximum wireless speed of up to 300 Mbps on both the 2.4 GHz and 5 GHz bands.
Does the Netgear WNDR3800 router support dual-band technology?
Yes, the Netgear WNDR3800 router supports dual-band technology, allowing you to connect devices to both the 2.4 GHz and 5 GHz frequency bands simultaneously.
How many devices can be connected to the Netgear WNDR3800 router simultaneously?
The Netgear WNDR3800 router can support a maximum of approximately 20-25 devices connected simultaneously.
Does the Netgear WNDR3800 router have USB ports?
Yes, the Netgear WNDR3800 router has two USB 2.0 ports that can be used for connecting USB storage devices or printers.
Can I set up a guest network on the Netgear WNDR3800 router?
Yes, the Netgear WNDR3800 router allows you to set up a guest network, providing Wi-Fi access to guests while keeping your main network secure.
Does the Netgear WNDR3800 router support VPN (Virtual Private Network) passthrough?
Yes, the Netgear WNDR3800 router supports VPN passthrough, allowing you to establish VPN connections from devices connected to the router.
Can I remotely manage the Netgear WNDR3800 router?
Yes, you can remotely manage and control the Netgear WNDR3800 router by accessing its settings through the Netgear Genie mobile app or web interface.
Does the Netgear WNDR3800 router have parental controls?
Yes, the Netgear WNDR3800 router offers parental controls, allowing you to restrict access to certain websites or set up scheduled internet access for specific devices.
Can I prioritize certain devices or applications for bandwidth on the Netgear WNDR3800 router?
Yes, the Netgear WNDR3800 router supports Quality of Service (QoS) settings, allowing you to prioritize specific devices or applications for better bandwidth allocation.
Can I connect a printer or external hard drive to the Netgear WNDR3800 router?
Yes, you can connect a USB printer or external hard drive to the USB ports on the Netgear WNDR3800 router and share them over the network.
Does the Netgear WNDR3800 router support wireless security protocols?
Yes, the Netgear WNDR3800 router supports various wireless security protocols, including WPA/WPA2 encryption, to secure your wireless network.
Does the Netgear WNDR3800 router have built-in firewall features?
Yes, the Netgear WNDR3800 router includes a built-in firewall that provides basic security by blocking unwanted incoming connections.
Can I set up port forwarding on the Netgear WNDR3800 router?
Yes, the Netgear WNDR3800 router supports port forwarding, allowing you to redirect incoming traffic from specific ports to a device on your network.
Is the Netgear WNDR3800 router compatible with cable internet service providers?
Yes, the Netgear WNDR3800 router is compatible with cable internet service providers. You can connect the router to your cable modem to provide wireless connectivity to your devices.
Does the Netgear WNDR3800 router support IPv6?
Yes, the Netgear WNDR3800 router supports IPv6, the latest version of the Internet Protocol.
DOWNLOAD THE PDF LINK:Netgear WNDR3800 N600 Dual-Band Gigabit Wireless Router Installation Guide