SEHNLICH REC-5CCT-6IN INCARLED 5CCT LED Recessed Lighting Installation Guide
- June 12, 2024
- SEHNLICH
Table of Contents
SEHNLICH REC-5CCT-6IN INCARLED 5CCT LED Recessed Lighting Installation
Guide
Items Required (Purchase separately)
- **Gloves and Safety Glasses
**
- **Ladder
**
- **Power Drill with a hole saw attachment
**
-
Wire Cutters
-
Wire Strippers
-
Dimmer from the Compatibility List (if needed)
INSTALLATION GUIDE
Can be installed in 3/8” to 5/8” thick ceilings
-
Turn power OFF from the electrical panel before the installation
-
Determine the location for the installation and cut ceiling hole in accordance with cut — hole dimensions. Use the template inside the box to cut a hole in the ceiling.
-
Open the junction box swing cover and remove the appropriate knockout(s).
-
Insert the electrical supply cable through the knockout.
-
Using quick — connect push — in terminals, connect the green ground wire to the green wire terminal; black wire to the black wire terminal; white wire to the white wire terminal.
-
Place all wiring and connections back into the box and close the cover. Connect the driver to the light panel.
-
Insert the junction box through the opening.
-
Push mousetrap springs on the fixture upwards and insert the fixture base into the mounting hole. Release the clips and the fixture will be pulled flush to the ceiling. The springs will rotate back into position and hold the LED module tight to the ceiling
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>