SONOFF TECHNOLOGIES DW2-RF 433MHZ Wireless Door and Window Sensor User Manual
- June 12, 2024
- Sonoff Technologies
Table of Contents
DW2-RF 433MHZ Wireless Door and Window Sensor
User Manual
The device can be operated intelligently via working with the SONOFF 433MHz RF
Bridge to communicate with other devices.
The device can work with other gateways supporting 433MHz wireless protocol.
Detailed information is in accordance with the final product.
Operation instruction
- Download APP****
-
Install batteries
2-1. Remove the back cover of the transmitter. 2-2. Insert batteries into the battery compartment based on identifiers of positive and negative poles. 2-3. Close the back cover.
The battery is not included, please purchase it separately. -
Add sub-devices
Connect the Bridge before adding the sub- device.Access the eWeLink APP and select the Bridge, tap “Add” to select the alarm, and a “Beep” means the Bridge enters the pairing mode. Then seperate the magnet for more than 20 mm from the transmitter until the LED indicator stays on for 1 to 2s, and the pairing is complete when you hear “Beep Beep”.
If the addition failed, move the sub-device closer to the Bridge and try again.
Install the device
- Tear off the protective film of the 3M adhesive.
- Try to align the mark line on the magnet with that on the transmitter during installation.
- Install them in the opening and closing area separately. Make sure the installation gap is less than 5mm when the door or the window is closed.
Specifications
Model | DW2-RF |
---|---|
RF | 433.92MHz |
Quiescent current | ≤ 1.5uA |
Emission current | ≤ 20mA |
Working voltage | DC12V(Model: 27A 12V) |
Wireless transmission distance | Max. 50m |
Installation gap | <5mm |
Working temperature | -10°C-40°C |
Material | PC |
Dimension | Transmitter: 70x31x19mm Magnet: 42x14x16mm |
Product Introduction
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Features
DW2-RF is a low-energy wireless door/window sensor that makes you know the opening/closing status of door and window by separating the magnet from the transmitter. Connect it with the Bridge and you can create a smart scene to trigger other devices.
Application
Note:
- Do not install outside the door/window.
- Do not install in the unstable position or in the place exposed to rain or moisture.
- Do not install near wiring or magnetic object.
Replace batteries
SONOFF TECHNOLOGIES CO., LTD.
Documents / Resources
|
SONOFF TECHNOLOGIES DW2-RF 433MHZ Wireless Door and Window
Sensor
[pdf] User Manual
DW2-RF 433MHZ Wireless Door and Window Sensor, DW2-RF 433MHZ, Wireless Door
and Window Sensor, Door and Window Sensor, Window Sensor, Sensor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>