BRISTAN QB BAS C Qubo Basin Mixer with Clicker Waste Instruction Manual
- June 12, 2024
- BRISTAN
Table of Contents
- Specifications
- Spare Parts
- Pack Contents
- Operation
- Tools Required for Installation/ Maintenance
- Prior to Installation
- Installation
- Waste Installation and Operation
- General Cleaning
- Maintenance – Cartridge/ Valve Replacement
- Maintenance – Clean/ Replace Outlet
- Love Your Chrome
- Troubleshooting
- Contact Us
- Servicing Your Tap
- Our Guarantee
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Installation Instructions
& User Guide
Please leave these instructions with the end user QB BAS C (D1)
Specifications
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com and search for your product.
Pack Contents
Operation
Tools Required for Installation/ Maintenance
Prior to Installation
All products manufactured and supplied by Bristan are safe to use provided
that they are installed, operated and receive regular maintenance in
accordance with these instructions.
This product needs to be installed in accordance with, and meet the
requirements of The Water Supply (Water Fittings) Regulations (Northern
Ireland) 2009 and The Water Supply (Water Fittings) (Scotland) Byelaws 2014.
For full Installation Requirements & Notes (IRN) please visit
www.wrasapprovals.co.uk/approvals-directory
Isolation valves must be fitted to the inlet water supplies to ensure ease of
future maintenance.
Before installing this product the water supply must be thoroughly flushed in
order to remove any swarf, solder etc.
Full access must be made available for future maintenance/servicing purposes.
This product must not be modified in any way as this will invalidate the
guarantee.
Important
The images shown are for illustrative purposes only.
The tap you have purchased may look different to those pictured in this
booklet but will follow the same installation steps.
Your contents page will be specific to your product.
IF you find your product or any of its components differ from those shown on
the contents page, please contact our customer support.
Installation
Waste Installation and Operation
General Cleaning
Bristan products are made from premium materials, with hand polished,
electroplated, PVD or EPD finishes.
Your taps or shower should be regularly cleaned with warm water, a mild pH-
neutral liquid soap, and polished with a soft cloth.
Any residues from soap, toothpaste, Shampoos and shower gels can cause
blemishes if not rinsed off straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage the
surface finish. Avoid using abrasive cloths, scouring pads, scrub soonges,
steel wool or anything similar.
Maintenance – Cartridge/ Valve Replacement
Maintenance – Clean/ Replace Outlet
Love Your Chrome
Bristan offers an effective chrome-friendly cleaning kit for use with your tapos and showers.
Scan the QR Code or search for ‘CLEAN KITOT onwww.bristan.com.
Troubleshooting
Symptom | Cause | Remedy |
---|---|---|
Low Flow | Partially closed isolation valve. | Open isolation valve. |
Airlock or partial blockage in the supply pipework. | Flush through pipework to |
ensure removal of debris and any airlocks.
Partial blockage in the outlet| Remove to Clean and soak in suitable solution.
No hot water or cycling hot and cold| Instantaneous water heater cycles on and
off as flow rate or pressure is too low.| Increase water flow rate or pressure
through system.
No Flow| Closed isolation valve.| Open isolation valve.
Mains water supply turned off.| Turn on mains water supply.
Temperatures not
corresponding with taps| Inlet pipes have been connected incorrectly| Swap the
inlet tails around.
Notes
Please use this space for any notes you or your installer may have regarding
the installation/plumbing of this product.
Contact Us
Bristan Group Ltd.
UK: Bristan Group, B78 1SG.
EU: Masco Europe S.a.rl. 14 Rue Strachen 6935 Mensdortf Luxembourg
Customer Service: +44530 026 6273
Web: www.bristan.com
Email: enquire@bristan.com
A Masco Company
Servicing Your Tap
We recommend servicing your tap at least once every year to prolong its life. To see a video showing how to remove the cartridge for servicing, scan the QR code with your smart phone or tablet.
Alternatively visitwww.youtube.com/BristanTV
Our Guarantee
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind.
Your guarantee starts from the purchase of your product, but you can still
benefit from registering it for easier identification in the unlikely event of
a manufacturing fault, please visit
www.bristan.com/register
For any other queries, please call Customer Service on 0330 026 6273 where our
expert team of advisors will be able to offer you any helo and advice.
For full guarantee terms and
conditions visit www.bristan.com/service-
centre/guarantees.