Lucci 269370 Maya 1 Light Table Lamp Instruction Manual

Lucci 269370 Maya 1 Light Table Lamp

Product Information

The Maya Table Lamp is a portable luminaire designed for indoor use. It is available in three different colors: Black, Chrome, and Bronze Finish. The lamp has a rated voltage of 220-240V~ 50Hz and a maximum rated wattage of 45W. It features an ES / E27 lamp holder and a USB-C output with a voltage of 5V DC and a current of 2A. The lamp weighs 2.0kg and has dimensions of H:545mm, L:340mm, W:300mm.

Product Usage Instructions

1. Before assembly, installation, and use of the Maya Table Lamp, please read and follow all instructions carefully to ensure correct function and safety. Keep the instructions for future reference.
2. Installation Requirements:
3. Make sure the lamp is used indoors only.
4. Ensure the rated voltage of your electrical supply matches the lamp’s rated voltage (220-240V~ 50Hz).
5. Use the lamp in a stable location where it won’t be easily knocked over.
6. Installation Directions:
7. Select a suitable location for the lamp.
8. Place the lamp on a flat surface.
9. Insert the appropriate light bulb into the ES / E27 lamp holder.
10. If desired, connect your device to the lamp’s USB-C output for charging.
11. Safety Tips:
12. Do not attempt to disassemble or modify the lamp.
13. Avoid touching the lamp while it is in use as it may become hot.
14. When cleaning the lamp or changing the light bulb, make sure it is disconnected from the power source.
15. If you experience any issues with the lamp or require assistance, contact the manufacturer, their service agent, or a qualified person for help.

Note: The lamp’s USB-C output is compatible with devices that require a 5V DC, 2A charge. Refer to your device’s instructionmanual for the required charge ratings.

SKU# 269370, 269371, 269372
Rated Voltage 220-240V~ 50Hz

To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.

Warranty

1. This portable luminaire is covered by a 12-month warranty valid for in-store replacement or refund only.
2. The warranty period starts from the date of purchase. Please retain the proof of purchase.
3. Warranty will be void if there is any damage due to improper usage or modification to the portable luminaire.
4. Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

1. Select a suitable location for this portable luminaire:

2. Ensure it is on a flat and stable surface.

3. This portable luminaire is suitable for indoor use only.

4. Do not place flammable material near or over the portable luminaire.

5. Ensure the portable luminaire is not installed in direct line of an air vent/system.

6. If the portable luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

7. Do not exceed the maximum wattage rating.

8. Take care not to pull any electrical wires during unpacking as this may damage the connection.

9. Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
   If parts are missing, return the complete product to the place of purchase for inspection or replacement.

10. Check whether the portable luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

11. Do not plug into the mains power socket outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.

Installation Directions

1. Remove all packaging material from the portable luminaire and fabric lamp shade (B).
2. Remove the lamp holder ring (C) from the lamp holder (A).
3. Install the fabric lamp shade (B) onto the lamp holder (A) and secure using the lamp holder ring (C).
4. Install a globe (D – not included) into the lamp holder. Do not exceed the maximum rated wattage.
5. Select a suitable location for the portable luminaire. See the installation requirements above.
6. Insert the plug (F) into the mains power socket outlet and ensure it is fully plugged in.
7. Turn power on at the mains power socket outlet.
8. Use the touch switch (E) to turn the portable luminaire on and off.
9. You can charge your device via the USB output on the base of the portable luminaire. The rating of the USB output is USB-C, 5V DC, 2A. Refer to the instruction manual of your device for the required charge ratings..

Safety Tips

• Always ensure the power is OFF and the portable luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the portable luminaire.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• To avoid injury or damage to the portable luminaire, ensure that power leads and screws are secure before connecting the power.
• Young children should be supervised to ensure that they do not play with the portable luminaire.
• Handle the portable luminaire and shade with care to avoid any damage or breakage.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
• Ensure that the portable luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>