U-PROX WDC Black Wireless Magnetic Contact Sensor Instruction Manual

June 12, 2024
U-PROX

U PROX WDC Black Wireless Magnetic Contact Sensor - qr https://www.u-prox.systems/doc_wdcout

www.u-prox.systems
[email protected]
www.u-prox.systems/doc_wdcout

WIRELESS MAGNETIC DOOR/WINDOW CONTACT

Is a part of the U-Prox security alarm system
User manual
Manufacturer: Integrated Technical Vision Ltd.
Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine

U PROX WDC Black Wireless Magnetic Contact Sensor -

U-Prox WDC – is a wireless magnetic contact designed to monitor the status of structural elements (open/close) to detect an attempt to enter a room. The device sends an alarm notification to the alarm center U-Prox security alarm system.
Mounted indoors and used to protect doors and windows.
The detector has connector for connecting the arming information LED and external sensor, e.g. reed switch.
The device is connected to the control panel and is configured with the U-Prox Installer mobile application.

https://u-prox.systems/Installer

Functional parts of the device (see picture)

 1. Bottom plate of magnet case
2. Magnet case cover
3. Neodymium magnet
4. Bottom plate of the detector case
5. Detector case top cover
with the device
6. Magnet position marks
7. LED indicator
8. Plastic protector of device board
9. Tamper switch| 10. Connector for external
sensor and LED:
LD contact (+ LED)
GND contact (earth)
DC contact (sensor)
11. On/off button
12. Battery CR123A
13. External sensor (reed switch)
14. External LED
15. Rubber seal
---|---

TECHNICAL SPECIFICATIONS

Reed switch threshold 7-15 mm,  operations > 1 000 000
Power 3V, CR123A lithium battery included
Service life of battery up to 5 years
Communication ISM-band wireless interface

with several channels
ITU region 1 (EU, UA):  868.0 to 868.6 MHz,           bandwidth 100kHz, 20 mW max.,           up to 4800m (in line of sight)
ITU region 3 (AU):       916.5 to 917 MHz,           bandwidth 100kHz, 20 mW max.,           up to 4800m (in line of sight)
Dimensions & weight| Secure two way communication,
sabotage detection, key – 256 bits
Operating temperature range| -20°C to +50°C
Radio frequency| 85 х 20,9 х 20,4 mm  &  66 gram
Magnet dimensions| 85 х 11 х 6 mm
Case colour| white, dark brown, black

COMPLETE SET

  1. U-Prox WDC;
  2. Magnet;
  3. CR2 battery (pre-installed);
  4. Mounting kit;
  5. Quick start guide

CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY

Warranty for U-Prox devices (except batteries) is valid for two years after the purchase date.
If the device operates incorrectly, please contact [email protected] at first, maybe it can be solved remotely.

REGISTRATION

U PROX WDC Black Wireless Magnetic Contact Sensor -
fig1

RANGE TEST FOR OPTIMAL INSTALLATION LOCATION

Due to Grade 2 requirement RF link works with reduction of power in 8 dB

U PROX WDC Black Wireless Magnetic Contact Sensor -
fig3

INDICATION IN RANGE TEST MODE

INSTALLATION

U PROX WDC Black Wireless Magnetic Contact Sensor -
fig5

U PROX WDC Black Wireless Magnetic Contact Sensor -
fig6

AN EXTERNAL SENSOR CONNECTION

AN EXTERNAL LED CONNECTION

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

U-PROX User Manuals

Related Manuals