Insta360 CINSPHD/F Power Selfie Stick Instruction Manual
- June 12, 2024
- Insta360
Table of Contents
Insta360 CINSPHD/F Power Selfie Stick Instruction Manual
Overview
Specifications
Maximum Length: 100cm
Minimum Length: 33cm
Weight: 280g
Weight-Bearing Restriction: 300g
Input: 5V/2A
Output: 5V/1.5A
Battery Capacity: 4500mAh
Use Environment: -20°C to 40°C (-4°F to 104°F)
Charging
-
Fully charge the Power Selfie Stick (hereinafter referred to as selfie stick) before
Connect the USB-C Port ( 2 ) on the selfie stick to a 5V/2A adapter to charge the stick. -
The indicator lights will blink when the stick is All the indicator lights will be steady when fully charged. The lights will remain steady as the stick discharges (see below).
Press the Battery Button once for the indicator lights to display the power
LED Indicators
How to Use
Before use, please remove the cap on the 1/4” screw.
-
Attach the camera to the selfie stick. Keep the camera screen level with the selfie stick‘s buttons and align the screw hole on the bottom of the camera (or mount adapter) with the 1/4” screw on
the selfie stick. Turn the knob on the selfie stick to secure the camera onto the selfie stick. -
Connect the camera to the selfie stick using the included USB-C cable.
The shutter button and power button on the selfie stick can be used to control the camera and shut down the camera.
The selfie stick will start to charge the camera once connected. -
Pull out the Extension Rod to adjust the length of the selfie stick.
-
Turn on the camera, and press the Shutter Button to start shooting.
Notes:
-
The selfie stick should never come in contact with any kind of Do not use it in the rain. If the inside of the
battery comes in contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion. -
Do not drop or strike the selfie Do not place heavy objects on it.
-
When mounting a camera (which should not weigh over 300g) onto the selfie stick, please hold the selfie stick firmly to prevent the camera from falling off.
-
The two USB-C Ports ( 1 ) on the top have the same functions. You only need to connect the camera to one of them, not both at the same time.
-
This product is designed mainly for hand-held Do not use it on vehicles (such as motorcycles, mountain bikes, etc.).
-
The ideal charging environment is 0°C to 45° C (32°F to 113°F). The ideal storage environment is -20°C to 40°C (-4°F to 104°F). Do not use or store the selfie stick in high temperature Use of the battery in extreme high or low temperature environments can affect battery life and shorten its run time. Clean the USB-C ports with a clean, dry
Disclaimer
Please read this Disclaimer carefully.
Using this product means that you acknowledge and accept the terms of this
disclaimer. By using this product, you hereby acknowledge and agree that you
are solely responsible for your own conduct when using this product and any
consequences thereof. You agree to use this product only for proper and lawful
purposes. You understand and agree that Arashi Vision Inc. (hereinafter
referred to as ‘Insta360’) accepts no liability for any and all misuse,
consequences, damages, injuries, penalties, or any other legal responsibility
directly or indirectly incurred by your using this product and associated
accessories. Before every use, make sure that your accessories are functioning
properly. If there’s any
damage or irregularity, stop using them immediately. Within the scope of state
laws and regulations, Insta360 reserves the right of final explanation and
revision for the commitment.
After-Sales Service
The warranty period of the attached product is 6 months from the original
retail purchase. Warranty service may vary according to the applicable laws of
your state or jurisdiction. For detailed warranty policies, please visit
http://insta360.com/support