MeTra 99-8233B Dash Kit Installation Guide
- June 12, 2024
- Metra
Table of Contents
MeTra 99-8233B Dash Kit
Product Information
The product is a kit with part number 99-8233B designed for installation in a Toyota Avalon model from 2011 to 2012 without factory navigation. The kit is manufactured by Metra, a company specializing in car audio and electronics accessories. The kit includes the following features:
- A provision for ISO DIN radio with a pocket
- Secure radio brackets
- Secure pocket
- Climate control attachment
- Panel clips for the radio trim panel
KIT FEATURES
- ISO DIN radio provision with pocket
- ISO DDIN radio provision
- Painted Matte Black
KIT COMPONENTS
- A) Radio trim panel
- B) Radio brackets
- C) Pocket
- D) (2) Panel clips
- E) (4) #8 x 3/8” Phillips screws
WIRING & ANTENNA CONNECTIONS (sold separately)
- Wiring Harness: 70-1761 TYTO-01
- Antenna Adapter: Not required
- Steering wheel control interface: ASWC-1 (sold separately)
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
- 10mm Socket wrench
CAUTION: All accessories, switches, climate control panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
Product Usage Instructions
- Start by unclipping and removing the radio/climate trim panel (refer to Figure A ).
- Remove the four 10mm screws securing the radio/climate control assembly (refer to Figure B ).
- Remove the four Phillips screws securing the climate control to the factory bracket assembly (refer to Figure C ).
- ISO DIN Radio Provision with Pocket:
- Remove the metal DIN sleeve and trim ring from the aftermarket radio.
- Secure the radio brackets to the radio using the screws supplied with the radio (refer to Figure A ).
- Secure the pocket to the radio bracket assembly using the supplied four #8 x 3/8 Phillips screws (refer to Figure A ).
- Secure the climate control to the completed assembly using the factory hardware (refer to Figure A ).
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio and factory components. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio and climate controls for proper operation.
- Attach the two-panel clips supplied onto the radio trim panel, snap the board to the vehicle, and then reassemble the dash in reverse order of disassembly (refer to Figure B ).
- ISO DDIN Radio Provision:
- Secure the radio brackets to the radio using the screws supplied with the radio (refer to Figure A ).
- Secure the climate control to the completed assembly using the factory hardware (refer to Figure A ).
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio and factory components. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio and climate controls for proper operation.
- Attach the two-panel clips supplied onto the radio trim panel, snap the panel to the vehicle, and then reassemble the dash in reverse order of disassembly (refer to Figure B ).
NOTE: If you encounter any difficulties during the installation, please call Metra’s Tech Support line at 1-800-253-TECH. Before calling, review the instructions thoroughly and ensure that the installation was performed according to the instructions. Metra also recommends seeking assistance from MECP-certified technicians for an optimal installation experience. For those interested in enhancing their installation and fabrication skills, Metra suggests enrolling in the Installer Institute, a reputable mobile electronics school. More information can be found at www.installerinstitute.com or by calling 800-354-6782.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most
recognized and respected mobile electronics school in our industry. Log onto
www.installerinstitute.com or call
800-354-6782 for more information and
take steps toward a better tomorrow.
Metra recommends MECP-certified technicians
METRA The World’s best kits metraonline.com