DEURKLINK ELIOT Door Handle On Shield Matt Black Complete Set User Manual

: June 16, 2024
: DEURKLINK

Table of Contents

DEURKLINK ELIOT Door Handle On Shield Matt Black Complete Set
Product Information
Product Usage Instructions
MOUNTING ASSEMBLAGE
MONTAGE
10-year warranty
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DEURKLINK ELIOT Door Handle On Shield Matt Black Complete Set

Product Information

Specifications

Brand: Eliot
Model: Op Schild
Type: WC-Verriegelung (Toilet Lock)

Product Usage Instructions

Before You Start
Before beginning the installation process, please follow these steps:

Check the content of the package to ensure you have all the necessary components.
Gather the necessary tools for mounting the door handle.

Mounting
Follow these steps to mount the door handle:

Insert the connecting pin through the lock on both sides of the door.
Slide the door handle over the pin until it connects to the door.
Temporarily tighten the bolt in the door handle using the supplied Allen key.
Mark the drill holes ensuring that the door handle is level.
Carefully drill 10 mm diameter holes perpendicular to the door where you have marked them.
Note: Do not drill all the way through, only about halfway through.

FAQ (Frequently Asked Questions)

Q: What should be included in the package?
A: The package should contain the WC-Verriegelung (toilet lock), a transparent adapter, and a door handle.
Q: What tools do I need for mounting the door handle?
A: You will need a drill, a 10 mm drill bit, and an Allen key.

Eliot on shield

Eliot on shield toilet

Eliot on shield bit lock

Eliot on shield profile cylinder

Check the content.
Do you have the door handle in the right size? The packaging should contain:

2 door handles with shield
connection pin
2 bolts
Allen key

With the toilet door handle you will also find the toilet lock, a transparent adapter (to fit the pin, if necessary) and a thin Allen key for securing the toilet lock.

BEFORE YOU START!

Gather the necessary tools.
To mount the door handle, you will need the following tools:

tape measure for checking dimensions
drill and an 10 mm drill bit
flat-blade screwdriver
pencil (or e.g. an awl) for marking the drill holes
level (optional, but handy)
Allen key (included)

Insert the pen through the lock.

Insert the connecting pin through the lock so that it protrudes equally far on both sides of the door.
Now slide the door handle over the pin until the door handle connects to the door.

MOUNTING ASSEMBLAGE

Secure the door handle to the pin (temporarily).
Use the supplied Allen key to temporarily tighten the bolt in the door handle so that the handle remains in the correct position when marking the drill holes.

MONTAGE

Mark the drill holes.

Make sure that the door handle is level when you mark out the drill holes.
If the handle is mounted on the door properly and straight, use a pencil (or an awl, for instance) to mark out the drill holes.

Drill the holes for fastening.

Unscrew the door handle with the Allen key and remove the door handle from the door.
Carefully drill 10 mm diameter holes perpendicular to the door where you have marked them.
Note! Don’t drill the holes all the way through the door yet, but only about halfway through.

Repeat for the other side.

Now repeat steps 4, 5 and 6 for the other side of the door. You use the same door handle for this (containing the screw holes).
Note! The drill holes should now go all the way through the door.

Screw the door handles onto the door.

Now put both door handles back on the connecting pin and press it against the door as firmly as possible.
Secure them in the drill holes using the included bolts. Use a hand screwdriver (not a battery-powered screwdriver) to avoid applying too much pressure.

Secure the door handle to the connecting pin.

Secure the door handle to the connecting pin using the Allen key.
Check that everything is securely fastened by moving the door handle up and down several times.
If it is loose or crooked, you can easily make some adjustments using a screwdriver.

Are you mounting a door handle with a toilet lock?

You insert the connecting pin of the toilet lock through the door. Use the transparent adapter to make the pin fit. Slide the knob of the toilet lock onto the pin on the other side.
Use the included Allen key to tighten the bolt in the knob at the bottom.
We hope you enjoy your new door handle!

Free parts service

Are you missing a screw, socket bolt, washer, adapter or other parts of a door handle or rosette that you bought from us?
Then please send an e-mail to info@deurklink24.nl and these parts will then be sent free of charge.

10-year warranty

We offer a 10 functionality warranty on the moving parts of all door handles and rosettes. A defect is repaired with new parts or an entirely new product. Shipping costs are also covered by the warranty.
The lock hole does not match
When you cannot mount the door lock correctly because the lock distance of the door latch does not match the one on your lock, exchange is no problem. Please contact us via
- info@deurklink24.nl for this.
Detach door handle from shield (turn handle)
With the help of locking ring pliers, it is possible to disassemble the handle from the shield. Then you can reassemble everything in mirror image. The visible screw holes of the shield are now on the other side. Because the recoil spring has to be under tension, it is very difficult to reassemble the handle. Disassembling the door handle voids the warranty.

Maintenance

Regularly wipe the door handle with a soft, possibly damp cloth. Do not use any cleaning agents. Depending on the situation, the black coating may become lighter over time. Applying a thin layer of clear wax or acid-free Vaseline largely eliminates this effect.

WE HOPE YOU ENJOY YOUR NEW DOOR HANDLE!