milwaukee M12 ICAV3 Camera Inspection 12 Volts Instruction Manual

: June 12, 2024
: Milwaukee

milwaukee M12 ICAV3 Camera Inspection 12 Volts

Product Information

Product Name: M12 ICAV3 Language Options: English, Deutsch, Italiano, Portugues, Nederlands, Dansk, Norsk, Svenska, Suomi, Cesky, Slovensky, Polski, Magyar, Slovenko, Hrvatski, Latviski, Lietuviskai, Eesti Product

Usage Instructions:

Before starting any work on the machine, remove the battery pack.
The display runs off of an internal rechargeable battery when separated. To recharge the display, follow one of the options below:
- a. Connect the display to the handle/battery pack.
- b. Connect the display to a power source via USB cable. 3. For more information on recharging the display, refer to the text section in the user manual.

SAFETY INSTRUCTIONS INSPECTION CAMERA

Switch oﬀ the mains fuse for the relevant area when working behind walls.
When working in pipes, make sure that these are not live or electrically charged. The pipes must not contain any liquid. The camera and the device must not come into contact with liquid.
The camera and the cable must not come into contact with oil, gas or other materials capable of causing corrosion.
To reduce the risk of explosion, electric shock and property damage, always check the work area before beginning a job. Do not allow cable to contact electrical, chemical, or moving hazards.
Auto use: Turn oﬀ the engine and allow to cool before beginning the inspection. Do not allow the visual inspection camera or cable to contact oil, gas, or other corrosive materials.
To reduce the risk of damage to the tool, do not use excessive force or “kink” the cable. Do not use in areas where visual inspection camera and cable will contact with corrosive or oily substances.
Do not use the cable to clear clogs or move obstructions. This is not a drain cleaner!

SAFETY INSTRUCTIONS BATTERY

Do not try to replace the battery pack if the surface of the instrument is wet.
Disconnect all the cords and cables from the object under test and power oﬀ the instrument before removing or inserting the battery pack.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors oﬀ er to retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only System M 12 chargers for charging System M 12 battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with battery acid wash it oﬀ immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.
Warning! To reduce the risk of ﬁ re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in ﬂ uid or al-low a ﬂ uid to ﬂ ow inside them. Corrosive or conductive ﬂ uids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., Can cause a short circuit.
This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety. They should be supervised whilst using the appliance. Children shall not use, clean or play with this appliance, which when not in use should be secured out of their reach.

SPECIFIED CONDITIONS OF USE

The digital inspection camera can be used to view and inspect areas that are hard to access. It is ideal for the rapid and simple localization of problems and objects without having to open or damage items. The recordings can be saved as images or movies on the memory card.
Appliance with strong radiated disturbances may be inﬂ uence display function, it would be self-recovered when interference was removed.
Do not use this product in any other way as stated for normal use.

RADIO FREQUENCY INTERFACE REQUIREMENTS – RELATED EUROPEAN INSTALLATION

Note : This equipment has been tested and found to comply with the limits for a EN 300 440 v2.1.1 receiver Category 3.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment is sensitive to other equipment that intentionally generates, radio frequency energy in 2414, 2432, 2450, and 2468MHz that may conduce to the instability to use the Remote Control on it. However, there is no guarantee that interference will not occur in a particular installation. If this equipment suﬀ er from harmful interference from another radio device to radio this can be determined by turning the respective equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Turn oﬀ the disturbance equipment
Increase the separation between the disturbance equipment Consult the dealer or an experienced radio technician for help

Assembling Instructions

milwaukee M12 ICAV3 Camera Inspection 12 Volts fig-1

EC-DECLARATION OF CONFORMITY

Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 ICAV3 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://services.milwaukeetool.eu.

GB-DECLARATION OF CONFORMITY
Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 ICAV3 is in compliance with Directive S.I. 2017/1206 (as amended). The full text of the GB declaration of conformity is available at the following internet address: http://services.milwaukeetool.eu.

TECHNICAL DATA

Battery voltage……………………………………………………………………………… 12 V
Weight with battery ………………………………………………………………………… 720 g
Camera cable length ……………………………………………………………………..2744 mm
Camera head ………………………………………………………………………………..12,4 mm
Screen resolution…………………………………………………………………………..320 x 240 pixel
Picture resolution …………………………………………………………………………..30 M Pixel
Max. zoom ……………………………………………………………………………………4x
Max. battery life (1,5 Ah)…………………………………………………………………4,5 h
Type of memory card ……………………………………………………………………..SD-Card
Max. memory size SD-card …………………………………………………………….32 GB
Frequency band(s) ………………………………………………………………………..2414, 2432, 2450, 2468 MHz
Maximum radio-frequency power transmitted in the
frequency band(s)…………………………………………………………………………. 5,07 dBm

Accessory

milwaukee M12 ICAV3 Camera Inspection 12 Volts fig-6

BUTTONS

milwaukee M12 ICAV3 Camera Inspection 12 Volts
fig-8

SETTINGS

To enter the settings menu, turn on the tool and press the Settings button. Use the ◄►▲▼ buttons to move through the setting menu.

milwaukee M12 ICAV3 Camera Inspection 12 Volts fig-11

CHARGING THE DISPLAY

When the display and handle are connected, the battery pack will power both the handle and the display. When separated, the display runs oﬀ of an internal rechargeable battery. To recharge the display, connect it to the handle/battery pack, or to a power source via USB cable. Always store the display docked on the handle. If the display shuts down due to low power, recharge for at least 30 minutes before use.

DOWNLOADING TO A COMPUTER

Insert the USB cable into the port on the side of the display. Connect the USB end into the USB port on your computer. NOTE: If you are unable to view the videos on your computer it may be because your computer is missing the DIVX or XVID codec. The AVI ﬁ le is recorded in MPEG4 format and your computer needs a DIVX or XVID codec to decode and play it. Download the appropriate codec to view the images/videos.

TURNING ON/OFF
When the display is docked on the handle, press either Power button to turn the tool on. Press and hold either Power button to turn the tool oﬀ . When the display and handle are separated, use the individual power buttons to turn each piece on and oﬀ.

FUEL GAUGE
When the display is docked on the handle, the M12™ battery pack fuel gauge is displayed in the upper right corner. When the display is undocked from the handle, two fuel gauges are displayed. The left gauge shows the remaining charge of the display’s internal battery. The right gauge shows the remaining charge of the M12™ battery pack. Each block in the fuel gauges represents approximately 1/4 of the battery’s life.

USING THE HANDLE AND DISPLAY
To separate the display from the handle grasp each part ﬁ rmlyand slide the display away from the battery pack. To reconnect, slide the handle and display together.
NOTE: The error message “NO IMAGE SIGNAL” is displayed if the handle is not powered on, the handle is out of range of the display
(approximately 15′) or the cable is not fully connected to the handle. Also, interference may occur when multiple tools are in use in close proximity.

USING THE PIVOTVIEW™ CABLE (ACCESSORY)
See picture section.
If the desired view is not achieved, press the release buttons and rotate the pivot cable 90°. Reattach to the socket. Bend or manipulate the cable as needed.

TAKING IMAGES/VIDEOS

Use the Image/Video button to toggle between taking images or videos. The icon of the selected mode is displayed in the upper left corner of the display.
Adjust the cable to best ﬁ t the opening. After checking the workspace for hazards, insert the cable.
Use the ▲▼ buttons to zoom in or out on the image.
Use the ◄► buttons to rotate the image in 90° increments.
Use the LED brightness dial to increase/decrease the light.
To take an image or begin a video, press the OK button or pull the trigger.
To end the video, press OK or pull the trigger again.
To save the image/video, press OK or pull the trigger. The image/video is saved onto the memory card. Or, use the ◄► buttons to select Cancel.
NOTE: During a video recording, sound is also recorded at the display if the MICROPHONE is ON in Settings.

REVIEW

Press the Review button to view the saved images/videos. Use the ◄► buttons to move through the stored images/videos. Press the OK button to select an image/video.
Use the ▲▼ buttons to select one of the following: milwaukee M12 ICAV3 Camera
Inspection 12 Volts fig-12

RESET BUTTON

Use the reset button to restore to factory settings.
Battery packs that have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% – 50% charged condition
Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION LI-ION BATTERY

The battery pack has overload protection that protects it from being overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch oﬀ the machine automatically. To restart, switch the machine oﬀ and then on again. If the machine does not start up again, the battery pack may have discharged completely. In this case it must be recharged in the battery charger.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.

• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

Ensure that battery contact terminals are protected and insulated to prevent short circuits.
Ensure that battery pack is secured against movement within the packaging.
Do not transport batteries that are cracked or leak. Check with the forwarding company for further advice

MAINTENANCE

Always keep the camera lens clean.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the Article No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.