SEQURE MSS12 Pro Soldering Station Instruction Manual

June 12, 2024
SEQURE

SEQURE logo MSS12 Pro Soldering Station
Instruction ManualSEQURE MSS12 Pro Soldering
Station

MSS12P/MSS12 Pro
Intelligent Soldering
Station Instruction Manual

Thank you for using this product, please read the manual carefully before use to avoid mistakes in your operation.

Product Overview

MSS12P/MSS12 Pro intelligent soldering station comes with 1.14-inch LCD color screen display, which supports PD2.0/3.0, QC2.0/3.0, DC12V-25V, MSS12 Pro also support XT60 3S-6S, AC100-240V power supply methods.Firmware upgrade, custom boot LOGO, change the color of the main interface,switch between Celsius and Fahrenheit, can calibrate and compensate for temperature, and intelligent temperature control can reach up to plus or minus 1%.

SEQURE MSS12 Pro Soldering Station - main introduction (1)Main Interface

Main Interface| Icon Display| Icon Description| Operation method
---|---|---|---
1| Stop| Stop Mode| Short press the rotary switch to switch between “Stop-mode and “Work” mode
Work| Work Mode
Sleep| Sleep Mode| /
C-T| Soldering Iron Tip Warning| Please re-adjust the position of the soldering iron tip or replace the soldering iron tip. After the warning condition is cleared, the warning icon will automatically change to Stop.
H-V| High Voltage Warning| Please use DC12-25V/35-65 power supply. After the warning condition is eliminated, the warning icon will automatically change to Stop.
H-T| High Temperature
Warning| Please disconnect the power supply, cool down the soldering iron tip to room temperature, and then reconnect. After the warning condition is removed, the warning icon changes to Stop by pressing or turning the rotary switch.
L-V| Low Voltage Warning| Please increase the supply voltage or decrease the LowVolt setting value. After the warning condition is removed,short press or turn the rotary switch and the warning icon changes to Stop.
P-T| PCB High
Temperature Warning| Please disconnect the power supply, cool down the soldering station to room temperature, and then reconnect. After the warning condition is removed, the warning icon changes to Stop by pressing or turning the rotary switch.
2| 20.0V| Power Supply Voltage| /
3| 300’C| Soldering Iron Tip Temperature| /
Check Tip| Soldering Iron Tip Warning| Please re-adjust the position of the soldering iron tip or replace the soldering iron tip.
High-V| High Voltage Warning| Please use DC12-25V/35-65 power supply
High-T| High Temperature
Warning| Please disconnect the power supply, cool down the soldering iron tip to room temperature, and then reconnect.
Low-V| Low Voltage Warning| Please increase the supply voltage or decrease the LowVolt setting value.
Pcb-T| PCB High
Temperature Warning| Please disconnect the power supply, cool down the soldering station to room temperature, and then reconnect
4| 300`C| Working Temperature Setpoint| Rotate the rotary switch to set the working temperature value.
5| | Power Progress Bar| /

(2)Level 1 Menu 、Level 2 Menu

Level 1 Menu| Level 2 Menu| Description| Default Value| Setting Range
---|---|---|---|---
Iron| 1.Tcomp| Temperature compensation| 0°C| -20°C-20°C
2.Buzzer| Buzzer| ON| OFF/ON
3.TempUnit| Temperature unit| °C| °C/°F
4.WorkTemp| Working temperature| 300°C| 100°C-450°C
5.StartHeat| Automatic heating when power on| OFF| OFF/ON
6.FactorySet| Factory reset| OFF| OFF/ON
7.TempShield| Temperature display is stable| ON| OFF/ON
8.TempStep| Working temperature setting step value of main interface| 10| 10-50
9.Logo| Customize the boot logo| OFF| OFF/ON
Idle| 1.SleepTime| Sleep time| 180s| 60-990s
2.SleepTemp| Sleep temperature| 200°C| 100°C-450°C
3.IdleTime| Standby time| 360s| 60-990s
4.Sensitive| Wake Sensitivity| 5| 1-30
5.ScreenOpen| Standby screen display| ON| OFF/ON
Lcd| 1.Brightess| Display brightness| 50| 5-100
2.Direction| Display direction| a’| 07180°
3.KeyAction| Rotation direction| L-R+| L-R4-/L+R-
4.ColorState| Working status font color| /| 10 colors
5.ColorSetT| Working temperature set point font color| /| 10 colors
6.ColorNowT| Soldering iron tip temperature font color| /| 10 colors
7.ColorVolt| Supply voltage font color| /| 10 colors
8.ColorPower| Power progress bar color| /| 10 colors
Volt| 1.LowVolt| Low voltage protection| boy| OFF/10.0-23.0V
2.PowerVolt| Supply voltage compensation| ov| -5.00-5.00V
Calib| /| Temperature calibration| /| T1-T4
About| /| Information about Soldering Station| /| /

(3) Menu Operation Guidelines
Main interface:

  1. Short press the rotary switch to switch between “Stop” mode and “Work” mode.
  2. Turn the rotary switch to adjust the working temperature setting value.
  3. Long press the rotary switch to enter the level 1 menu.
  4. A warning icon appears. After the warning condition is eliminated, short press or turn the rotary switch to turn the warning icon to Stop.

Level 1 menu:

  1. Turn the rotary switch to cycle through the level 1 menu function box.
  2. Short press the rotary switch to enter the level 2 menu.
  3. After long pressing the rotary switch or no key operation for 8s, return to the main interface.

Secondary menu:

  1. Turn the rotary switch to cycle through the level 2 menu function box.
  2. Short press the rotary switch to confirm entering the level 2 menu setting item, and the parameter setting box will appear. Turn the rotary switch to set this parameter. After the parameter setting is completed, long press the rotary switch or no key operation for 8s, it will automatically exit the parameter setting box and return to the level 2 menu.
  3. After long pressing the rotary switch or no key operation for 8s, it will return to the level 1 menu menu.

(4) Temperature Calibration

Calib Fix Fixed Value
Real Real Value
T1 T1Thermometer Temperature
Save Save

Temperature calibration is divided into four parameters T1,T2,T3,T4, after entering the calibration interface, T1 temperature parameter is selecting box by default ,short press the rotary switch,T1 temperature parameter changes to setting box  , waiting for value of “Real” to steadily fluctuate within value range of “Fix”.Thermometer to measure real temperature of soldering iron tip,turn rotary switch to write thermometer data to T1, after setting T1 calibration temperature, long press rotary switch to exit the setting box, turn otary switch to select T2, continue to complete temperature calibration of T2, T3, T4.Finally enter “Save”, short press rotary switch until “Save Succeed” appear, calibration is complete.
During calibration process, long press rotary switch to exit calibration interface, parameters are not saved.
In process of temperature calibration, add tin to clean soldering iron tip first, then use thermometer to measure temperature,during calibration,soldering iron tip is in a high temperature state,avoid scalding.

Eliminate Warning

When the soldering iron occurs a warning , a warning icon is displayed on the screen (if the buzzer is open, will accompany the warning beep), according to the prompt warning icon,troubleshot step by step after the warning condition is eliminated (if the buzzer is open, the warning beep will stop immediately), short press or turn rotary switch,warning icon (main interface 1) change to Stop.

Sleep Wake Up

  • Work mode, the soldering station will enter sleep mode automatically after waiting for SleepTime seconds when the handle is in a static state, the temperature will be automatically set to SleepTemp.
  • Sleep mode, wake up the soldering station and automatically restore the original setting of WorkTemp when short press or turn rotary switch or shake the handle; If the soldering station is not woken up, after waiting for IdleTime the soldering station stop working,enter
  • Stop mode. Stop mode, the handle is in a static state and rotary switch without operation,after waiting for 180s enter ScreenOpen,can exist by short press or turn rotary switch or vibrate the handle.

Technical Reference

Input Voltage Power Fastest Time from 30℃ to 300℃
12V 16W 37S
19V 40W 14S
24V 70W 9S
AC100-240V 70W 9S

Firmware Update

Visit www.sequremall.com to obtain firmware and upgrade teps.
Attention:MSS12 Pro before the firmware upgrade, ensure that the XT60 and AC port is disconnected,USB-C can be connected to a computer to avoid damage.

Connect USB-C with a computer, enter the level 1 menu “Iron” to select “9.Logo”, set it to “ON”,long press rotary switch or wait for automatic saving,enter to the LOGO interface,at this time the computer will appear a disk named “LOGO”.Copy the image named “LOGO.bmp” to the disk and disconnect.
Note:The picture is in unit color. bmp format,128 * 100 pixels,level is 128,vertical is 100, named “LOGO.bmp”

Warranty Terms

  1. Performance failure caused by non-human factors occurs within 3 months from the date of purchase,the manufacturer provides free repair service.After 3 months, no labor fee will be charged for the repair,if the parts are replaced, the cost shall be borne by the user.
  2. All artificial damage, self-disassembly,failure caused by improper use, and consumable soldering iron tip, is not covered by this warranty.

Safety Precautions

  • Use power supplies and accessories that meet safety standards,use original SEQURE accessories.
  • Must make sure that the power is off, can replace the soldering iron tip, to avoid damaging the product,beware of high temperature burns.
  • Soldering iron tip burn easily,power off after rest or completion,store in place not easily accessible to children.
  • Under any circumstances, only choose XT60, AC or USB-C to supply power for the
  • MSS12 Pro soldering station,can not be connected at the same time, to avoid damage.

www.sequremall.com
info@sequremall.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals