arboleaf CS20M Body Smart Scale User Guide
- June 4, 2024
- arboleaf
Table of Contents
arboleaf CS20M Body Smart Scale User Guide
Measurement Tips
To have accurate, consistent and comparable measurement results, there are some DOs and DON’Ts.
DO’s
- Place the scale on a flat hard surface.
- Stand straight on the scale with barefoot, no socks and no shoes. Both feet uniformly touch the four metal electrodes.
- Do calibration each time. Wait for “CAL” back to “0.0” then step on the scale for measurements.
- Use the scale under the same condiflon during same hour each day.
- Empty your bladder before weighing.
DON’Ts
- Do not measure with socks or shoes on.
- Do not measure during or immediately after a strenuous exercise.
- Do not measure immediately after shower, bath or sauna.
- Do not measure after heavy alcohol consumption.
- Do not measure when you have a fever.
Scale Display
Troubleshooting
No wireless connection between your scale and the app
- Reinstall Arboleaf app. Exit from the app (go to My Account “Settings” -> “Ex it fl at bottom), then delete the app. Go to Apple App Store or Google Play to install Arboleaf app again.
- Turn off Bluetooth then turn on Bluetooth again (go to your phone’s Settings).
- Power on reset your scale. Pull out batteries from your scale and put them back in.
- For Android 6.0 and above, Location needs to be enabled.
A non-zero number on scale
Your scale needs another reset.
- Pull one battery out from your scale and put it back.
- IMMEDIATELY place the scale on a hard flat surface.
- After you see the scale displays 0.0, close the battery cover.
Warranty Registration
https://arboIeaf.com/warranty
WARNING
Please read carefully before use
- Do not use if you have a pacemaker, or any other internal medical devices in your body.
- Do not use if you are pregnant.
- Do not use on slippery floors.
- Do not use when your body is wet.
CAUTION
- Your body compositions may not be accurate aker shower or heavy physical activifles.
- This smart scale model is not intended for use by infants or toddlers. Some body composition measurements are not for children under 18.
- Arboleaf smart scale should not be used for treating or diagnosing any medical conditions. Always consult your physician or health professional to determine what is suited for you.
Package Content
- Smart Scale
- 3 AAA Batteries
- User Guide
Specifications
- Dimensions: 101/2″x 10%”x 0.9″(260mm x 260mm x 24mm)
- Weight: 2.41b(1.1kg)
- Measurement 0.4- 3961b (0.2-180kg)
- Measurement Resolution: 0.21b (0.1kg)
- Power: 3 AAA batteries
Power Up Scale
Your scale shipment comes with 3 AAA batteries. Put the batteries in the battery compartment. Your scale should display 0.0. The scale is ready for use.
Initial Setup
Step 1: Download “Arboleaf” app and create an account
From Apple App Store (iOS) or Google Play (Android), search for “Arboleaf” and download it to your smart phone. You can also scan the QR code to download.
Download “Arboleaf” app or scan the QR cod
Register an account
Step 2: Pair scale with smartphone
Make sure Bluetooth is enabled on your phone. For Android 6.0 andabove, Location also needs to be enabled. Pairing is done automatically. Bluetooth icon is displayed on the scale.
Open Arboleaf app
Apply pressure to turn on scale
Take Measurement
Keep your app open on “Measurements” screen.
Apply pressure to turn on scale, wait for “CAL” back to “0.0”
Step on the scale barefoot until numbers are stable
Check measurements
When the display number flashes twice, it indicates that the weight measurement has finished. When the number 0 stops moving back and forth, the body fat and other body composition measurements have completed.
Arboleaf* Body Composition Smart Scale measures weight, body fat percentage, BMI and other body composition data using bioelectrical impedance analysis (BIA) technology. This smart scale is intended for home use only.
Arboleaf Corporaflon
5700 Granite Parkway, Suite 200, Piano, TX 75024
1-800-658-1148
[email protected]
www.arboIeaf.com