milwaukee M12 Toughshell Heated Vest Instruction Manual

: June 12, 2024
: Milwaukee

Table of Contents

milwaukee M12 Toughshell Heated Vest
Product Information
Product Specifications
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
SPECIFIC SAFETY RULES
SYMBOLOGY
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
ASSEMBLY
OPERATION
CARE
ACCESSORIES
SERVICE
LIMITED WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

milwaukee M12 Toughshell Heated Vest

milwaukee-M12-Toughshell-Heated-Vest-PRODUCT

Product Information

The product is a Cat. No. 304 Series 43-72-1000 M12TM Heated ToughshellTM Vest. It is a heated vest designed to provide warmth and comfort in cold weather conditions. The vest is powered by a 12 DC battery pack and features a battery controller for adjusting the heat settings. The vest is made of ToughshellTM material, which is durable and resistant to wear and tear.

Product Specifications

Cat. No.: 304 Series 43-72-1000
Volts: 12 DC
Battery Type: M12TM
Charger Type: M12TM

Product Usage Instructions

WARNING: To reduce the risk of personal injury and damage, disconnect and remove the battery pack and batterycontroller from the battery holder pocket before washing. Never immerse the battery holder, battery pack, or charger in liquid or allow liquid to flow inside them.

To clean the heated gear, follow these steps:

Remove the battery pack and battery controller.
Push the power cord completely into the battery controller pocket and fasten it closed.
Zip the center front zipper closed before washing.
Machine wash the vest on a Gentle Cycle in warm water. Do not use bleach. Do not dry clean. Do not wring or twist the vest.
Tumble dry the vest on Low Heat. Do not iron.

If the product is not functioning properly, return the heated gear, charger, and battery pack to a MILWAUKEE service facility for repairs.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

ELECTRICAL SAFETY

Do not expose heated gear to rain or wet condi- tions. Water will increase the risk of electric shock.
Do not abuse the power cable. Never use the cord for carrying, pulling or unplugging the heated gear. Keep cord away from heat, oil, sharp edges or moving parts.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when using the heated gear. Do not use while you are tired or under the influ- ence of drugs, alcohol or medication. A moment of inattention may result in serious personal injury.

POWER TOOL USE AND CARE

Do not use the heated gear if the power button does not turn it on and off. Any heated gear that cannot be controlled with the power button is dan- gerous and must be repaired.
Disconnect the battery pack from the heated gear before storing. Such preventive safety measures re- duce the risk of starting the heated gear accidentally.
Store out of the reach of children and do not al- low persons unfamiliar with these instructions to operate the heated gear. Heated gear can be dangerous in the hands of untrained users.
Maintain heated gear. Check for breakage of parts and any other condition that may affect the heated gear’s operation. If damaged, have the heated gear repaired before use.
Use the heated gear in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the heated gear for operations different from those intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use heated gear only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins,keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

SERVICE

Have your heated gear serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the heated gear is maintained.

SPECIFIC SAFETY RULES

SPECIFIC SAFETY RULES FOR HEATED GEAR

Read instructions carefully.

Use:

Do not use this heated gear with an infant, child, a helpless person, or anyone insensitive to heat, such as a person with poor blood circulation.
If you have a medical condition making you sensitive to overheating, or you use any personal medical devices, consult the devise manufacturer and/or your physician to determine if use of this product is appropriate.
Never use if inner liner is wet.
Heating elements are not recommended to touch bare skin.
Shut off power immediately if discomfort occurs.
Do not allow the cords to be pinched.
If improper operation of this heated gear is observed, discontinue its use immediately and contact a MILWAUKEE service facility for repair.
Do not use pins. They may damage the electric wiring.

Care:

Before washing, disconnect and remove battery pack and battery controller from battery pocket. Push the power cord completely into the battery controller pocket and zip all pockets closed.
Follow Care Instructions on gear tags. Machine wash, Gentle Cycle in warm water. Tumble Dry Low Heat.
Do not bleach.
Do not iron.
Do not wring or twist.
Do not dry clean. Do not use dry-cleaning fluid on this heated gear. Do not bleach. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome.Do not use this tool if you do not understand these operating instructions or you feel he work is beyond your capability; contact Milwaukee Tool or a trained professional for additional information or training.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

SYMBOLOGY

Volts
Direct Current
Machine wash, gentle cycle in warm water
Do not bleach
Do not wring or twist
Tumble dry, low heat
Do not iron
Do not dry-clean

SPECIFICATIONS

Cat. No ……………………………………………304 Series 43-72-1000
Volts …………………………………………………….. 12 DC
Battery Type …………………………………………..M12™
Charger Type …………………………………………M12™

FUNCTIONAL DESCRIPTION

Power button
Battery controller
Power cable port
Battery controller pocket

ASSEMBLY

WARNING

Recharge only with the charger specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery.

Inserting/Removing the Battery

To insert the battery, slide the pack into the body of the battery controller. Make sure it latches securely into place.
Insert the power cable (from inside the pocket) into the power cable port on the battery controller.
Push the power cable completely into the battery controller pocket and zip all pockets closed.
To remove the battery, push in the release buttons and pull the battery pack away from the controller.

OPERATION

To turn on, press and hold (about 2 seconds) the power button. The zone will be turned to High and the LED will light.
Temperature setting can be adjusted at any time by pressing the power button. Each press will cycle through the temperature settings.
To turn off, press and hold (about 2 seconds) the power button. The LED will turn off.
If the heated gear turns off unexpectedly, check connections and charge the battery pack. Battery controller is located inside of the pocket.

CARE

WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack and battery controller from the heated gear before performing any maintenance.
Never disassemble the heated gear, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.
If the heated gear does not start or operate properly with a fully charged battery pack, clean the contacts on the battery pack. If the heated gear still does not work properly, return the heated gear, charger and battery
pack, to a MILWAUKEE service facility for repairs.
WARNING To reduce the risk of personal injury and damage, disconnect and remove battery pack and battery controller from battery holder pocket before washing. Never immerse your battery holder, battery pack, or charger in liquid or allow a liquid to flow inside them.

To clean the heated gear:

Remove battery pack and battery controller.
Push the power cord completely into the battery controller pocket and fasten closed. Zip center front zipper closed before washing.
Machine wash, Gentle Cycle in warm water. Do not use bleach. Do not dry clean. Do not wring or twist.
Tumble Dry on Low Heat. Do not iron.

ACCESSORIES

WARNING Use only recommended accessories. Others may be hazardous.
For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.0

SERVICE

1-800-SAWDUST (1.800.729.3878) Monday-Friday, 7:00 AM – 6:30 PM CST or visit www.milwaukeetool.com Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions.
Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.

SERVICE – CANADA
Milwaukee Tool (Canada) Ltd 1.800.268.4015
Monday-Friday, 7:00 AM – 4:30 PM CST or visit www.milwaukeetool.ca

LIMITED WARRANTY

USA & CANADA

Every MILWAUKEE HEATED GEAR product (including its battery holder/ controller) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a Heated Gear product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after the date of purchase. Return of a Heated Gear product to a MILWAUKEE factory Service Center location, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE personnel, misuse, alterations, abuse, normal wear and tear, or accidents.
This warranty does not cover a M12™ LITHIUM-ION Battery Pack, a M12™ Charger, or a REDLITHIUM™ USB battery; there are separate and distinct warranties available for these products.
Warranty Registration is not necessary to obtain the applicable warranty on MILWAUKEE Heated Gear products. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.