LG OLED 65C9PLA 50-Hz 4K TV Owner’s Manual

LG OLED 65C9PLA 50-Hz 4K TV

Warning! Safety Instructions

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• Do not place the TV and/or remote control in the following environments:
  • Keep the product away from direct sunlight.
  • An area with high humidity such as a bathroom
  • Near any heat source such as stoves and other devices that produce heat.
  • Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.
  • An area exposed to rain or wind.
  • Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
  • Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
  • Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction, or product deformation.

Ventilation

• Install your TV where there is proper ventilation. Do not install it in a confined space such as a bookcase.
• Do not install the product on a carpet or cushion.
• Do not block or cover the product with cloth or other materials while the unit is plugged in.
  • Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.
  • Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
  • Do not move the TV whilst the Power cord is plugged in.
  • Do not use a damaged or loosely fitting power cord.
  • Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
  • Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.
  • Disconnecting the Device from the Main Power
• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
  • Do not let your children climb or cling to the TV. Otherwise, the TV may fall over, which may cause serious injury.
  • Outdoor Antenna Grounding (Can differ by country):
• If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70.

Grounding (Except for devices that are not grounded.)

•  TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth-ground wire to prevent possible electric shock.
  • Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
  • Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases, a fire may break out.
  • Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact customer service.
  • Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
  • If any of the following occur, unplug the product immediately and contact your local customer service.
• The product has been damaged.
• If water or another substance enters the product (like an AC adapter, power cord, or TV).
• If you smell smoke or other odors coming from the TV
• When lightning storms or when unused for long periods of time. Even if the TV is turned off by remote control or button, the AC power source is connected to the unit if not unplugged in.
  • Do not use high-voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
  • Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
  • Use only authorized attachments/accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
  • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
  • Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
  • To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe the dust off.

Batteries

• Store the accessories (battery, etc.) in a safe location out of the reach of children.
• Do not short-circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
• Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Moving

• When moving, make sure the product is turned off, and unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard, or injury.
  • Keep the packing anti-moisture material or vinyl packing out of the reach of children.
  • Do not allow an impact shock, or any objects to fall into the product, and do not drop anything onto the screen.
  • Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to the screen.

Cleaning

• When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Preparing

• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.
• The image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning the on / off button, turning off the device, and unplugging the power cord.
• The items supplied with your product may vary depending on the model.
• Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm wide. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types)
  • Ultra High-Speed HDMI®/TM cable (3 m or less)

Separate Purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, the manufacturer’s circumstances, or policies.

Magic Remote Control

AN-MR19BA

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

Wall Mounting Bracket

(Depending on the model)

Make sure to use screws and wall mount brackets that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model

| OLED55/65B9 OLED55/65C9 OLED55/65E9| OLED77B9 OLED77C9*
---|---|---
VESA (A x B) (mm)| 300 x 200| 400 x 200
Standard screw| M6| M6
Number of screws| 4| 4
Wall mount bracket| OLW480B| OLW480B

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV to the box or packing material that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and all cables.
• When holding the TV, the screen should face away from you to avoid damage.
• Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. (Not applicable for OLED55/65E9*)
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the following illustration.
• Hold the side of the TV with one hand, and hold the bottom of the rear cover or the side of the Stand with the other. (Hold the rear cover when placing the TV on the floor. Holding the bottom glass may result in injury.) (Only OLED55/65E9*)
• When transporting the TV, do not expose the TV to jolts or excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt it towards the left or right.
• Do not apply excessive pressure to cause flexing/bending of the frame chassis as it may damage the screen.
• When handling the TV, be careful not to damage the protruding buttons.
  • Avoid touching the screen at all times, as this may result in damage to the screen.
  • When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
  • Do not scratch or hit the glass with metal materials or objects. It may damage the TV or lead to an accident. (Only OLED55/65E9*)

Mounting on the Table

1. Lift and tilt the TV into its upright position on a table.
   • Leave a 10 cm (minimum) space from the wall for proper ventilation.
2. Connect the power cord to a wall outlet.
   • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
   • If you install the TV on a stand, you need to take action to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
   • Do not use any unapproved items to ensure the safety and product life span.
   • Any damage or injuries caused by using unapproved items are not covered by the warranty.
   • Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
   • Do not use too much force and over-tighten the screws; otherwise, a screw may be damaged and not tighten correctly.

Securing the TV to the Wall

1. Insert and tighten the eye bolts, or TV brackets and bolts on the back of the TV.
   • If there are bolts inserted at the eye-bolts position, remove the bolts first.
2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye bolts on the rear of the TV.
3. Connect the eye bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with a flat surface.
   • Use a platform or cabinet that is strong and large enough to support the TV securely.
   • Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
• For more information on screws and wall mount brackets, refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• Please use the accessory cable holder when hanging on the wall. (Only OLED55/65C9*)
• Attach the three covers when installing the wall mount. (Only when the item is provided.) (Only OLED55/65E9*)

Connections

Connect various external devices to the TV and switch input modes to select an external device. For more information on external device connection, refer to the manual provided with each device.

Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve the image quality.
• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly.

Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on the model)

CI module
View the encrypted (pay) services in digital TV mode. (Depending on the model)

• Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
• If the TV does not display any video and audio when CI+ CAM is connected, please contact the Terrestrial/Cable/Satellite Service Operator.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.

HDMI

• When connecting the HDMI cable, the product, and external devices should be turned off and unplugged.
• Supported HDMI Audio format: DTS (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz), DTS HD (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz), True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending on model)

• On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
• Off: Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s[HDMI ULTRA HD Deep Colour] setting to off.

USB

Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

External Devices

Available external devices are Blu-ray players, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the TV port.
• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device.
• Refer to the external equipment’s manual for operating instructions.

If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the [PICTURE] menu until the picture is clear.
• In PC mode, some resolution settings may not work properly depending on the graphics card.
• If ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance. (Depending on the model)
• When connecting via a wired LAN, it is recommended to use a CAT 7 cable. (Only when a LAN port is provided.)

Using Button

You can simply operate the TV functions, using the button.

** Basic functions**

< A type>

1. All running apps will close, and any recording in progress will stop. (Depending on the country)
2. You can access and adjust the menu by pressing the button when the TV is on.
3. You can use the function when you access the menu control.

< B type>

All running apps will close, and any recording in progress will stop. (Depending on the country)

Adjusting the menu
When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

< A type>

< B type>

Using Magic Remote Control

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the battery.

To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

(Some buttons and services may not be provided depending on models or regions.)

To use the button, press and hold for more than 1 second.

Streaming Service buttons Connects to the Video Streaming Service.

(INPUT) Changes the input source.
(INPUT) Accesses the [HOMEDASHBOARD].

Displays the set-top box Home menu.

When you are not watching via a set-top box: the display changes to the set-top box screen.

These access special functions in some menus.

Runs the record function.

(Control buttons) Controls media contents.

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first, pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
   • If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the / and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

• Pressing and holding the / button will let you cancel and re-register Magic Remote at once.
• It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed closer than 0.2 m, the Magic remote control may not perform as expected due to frequency interference.
• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
• This apparatus uses batteries. In your community, there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
• Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire, or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in the product.

Troubleshooting

Cannot control the TV with the remote control.

• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote control.
• Check if the batteries are still working and properly installed. No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem with the wall outlet by connecting other products.

The TV turns off suddenly.

• Check the power control settings. The power supply may be interrupted.
• Check if the auto-off function is activated on the settings-related time.
• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.

Abnormal Display

• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with the product.
• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly colored dots (white, red, blue, or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.
• This phenomenon also occurs in third-party products and is not subject to exchange or refund.
• You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related to the product performance, and it is not a malfunction.

Generated Sound

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

• Make sure to wring any excess water or cleaner from the cloth.
• Do not spray water or cleaner directly onto the TV screen.
• Make sure to spray just enough water or cleaner onto a dry cloth to wipe the screen.

Specifications

(Depending on the country)

Broadcasting Specifications

| Digital TV| Analogue TV

Television system

|

DVB-T/T2, DVB-C, DVB-S/S2

| PAL B/B, PAL B/G, PAL D/K, PAL-I,

SECAM B/G, SECAM D/K, NTSC-M

Channel coverage (Band)

| DVB-S/S2| DVB-C| DVB-T/T2*|

46 ~ 862 MHz

950 ~ 2,150 MHz

|

46 ~ 890 MHz

| VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz UHF V : 606 ~ 862 MHz

S Band II : 230 ~ 300 MHz

S-Band III: 300 ~ 470 MHz

Maximum number of storable programs| 6,000| 3,000
External antenna impedance| 75 Ω
CI Module (W x H x D)| 100.0 mm x 55.0 mm x 5.0 mm

Only DVB-T2/C/S2 support model only.

Wireless module (LGSBWAC92) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range| Output Power (Max.)
2,400 to 2,483.5 MHz

5,150 to 5,725 MHz

5,725 to 5,850 MHz (Not for EU)

| 18 dBm

18 dBm

12 dBm

Bluetooth
Frequency Range| Output Power (Max.)
2,400 to 2,483.5 MHz| 8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

• IEEE 802.11ac is not available in all countries.

Environment condition

Operating Temperature| 0 °C to 40 °C
Operating Humidity| Less than 80 %
Storage Temperature| -20 °C to 60 °C
Storage Humidity| Less than 85 %

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that are contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download. LG Electronics will also provide an open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to  opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Licenses

Important Information for Preventing Image Retention

OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under certain conditions, such as when displaying a static image on the screen for a long time. LG OLED TVs incorporate dedicated functions that protect the screen from possible image retention. If a static image persists on screen, screen brightness is automatically reduced in specific areas of, or across the entire screen. Once the static image disappears, the screen brightness will automatically return to its prior setting. This is not a product malfunction.

Examples of Images that May Cause Image Retention

• Still images or fixed images containing certain information that are displayed uninterrupted on the screen, such as channel numbers, station logos, program titles, news or movie subtitles, and headlines.
• Fixed menu or icons for video game consoles or broadcasting set-top boxes.
• Black bars are shown on the left, right, top, or bottom of the screen, such as in images with a 4:3 or 21:9 ratio.

Recommended Measures for Preventing Image Retention

• Avoid watching a video displaying an image as listed above for extended periods of time.
• Adjust your TV settings as below when turning on a video exhibiting an image as listed above for extended periods of time.
  • [Picture] → [Picture Mode Settings] → [Picture Mode] → [Eco]
  • [Picture] → [Picture Mode Settings] → [OLED LIGHT] → Adjust to lower value
  • [Picture] → [Additional Settings] → [OLED Panel Settings] → [Logo Luminance Adjustment] → [High]
• Turn off the menu bar of an external device, such as a set-top box, to prevent the long-term display of the menu bar of such a device. (Please refer to the manual of the applicable external device for instructions.)
• Adjust the settings as below when watching a video constantly showing black bars on the left, right, top, or bottom, in order to remove the black bars.
  • [Picture] → [Aspect Ratio Settings] → [Aspect Ratio] → [Vertical Zoom] or [All-Direction Zoom]

Information on Functions Supporting Image Quality in Relation to Temporary Image Retention

• LG OLED TVs provide a feature called Pixel Refresher, which helps to prevent temporary image retention.
• When the accumulated television viewing time reaches 2,000 hours or more (this is equivalent to watching TV for five hours a day over the course of a year), Pixel Refresher will be automatically activated once your TV is turned off. When turning off your TV, a notice will appear on the screen informing the activation of Pixel Refresher. This feature will run for an hour while your TV is turned off. A horizontal line may appear at the top or bottom of the screen when the process is almost finished.
• You may also manually activate Pixel Refresher via the TV menu:

• Whenever you watch your TV for more than four cumulative hours, Pixel Refresher will be automatically activated for a few minutes once your TV is turned off. ( Note: Pixel Refresher will not be activated if the power cord of your TV is not plugged in or the main power is off.)

FAQ’s

What should I do if the TV gets wet or comes into contact with water?

If water or another substance enters the TV, unplug the power cord immediately and contact customer service.

What should I do if I smell smoke or other odors coming from the TV?

If you smell smoke or other odors coming from the TV, unplug the product immediately and contact your local customer service.

Can I mount the TV on a wall?

Yes, you can mount the TV on a wall using screws and wall mount brackets that meet the VESA standard. Refer to the owner's manual for the specific dimensions and screw requirements for your TV model.

What is the screen size of the LG OLED 65C9PLA TV?

The LG OLED 65C9PLA features a screen size of 65 inches.

What is the resolution of the LG OLED 65C9PLA?

The TV has a 4K Ultra HD resolution, which is 3840 x 2160 pixels.

What is the refresh rate of the LG OLED 65C9PLA?

The LG OLED 65C9PLA has a refresh rate of 50 Hz, meaning it can display up to 50 frames per second.

Does the LG OLED 65C9PLA support HDR (High Dynamic Range)?

Yes, the LG OLED 65C9PLA supports HDR technology, including popular formats such as HDR10 and Dolby Vision.

What is the panel technology used in the LG OLED 65C9PLA?

The LG OLED 65C9PLA utilizes an OLED (Organic Light-Emitting Diode) panel, which offers deep blacks, vibrant colors, and wide viewing angles.

Does the LG OLED 65C9PLA support smart features?

Yes, the TV runs on LG's webOS platform, providing a range of smart features, including access to streaming services, an app store, and voice control options.

What audio features does the LG OLED 65C9PLA have?

The TV comes with built-in speakers that support Dolby Atmos, providing immersive sound. It also has various audio enhancement technologies such as AI Sound, Clear Voice, and more.

Can I connect external devices to the LG OLED 65C9PLA?

Yes, the TV offers multiple connectivity options, including HDMI ports, USB ports, Ethernet, Wi-Fi, Bluetooth, and more, allowing you to connect devices like gaming consoles, soundbars, and external storage.

Does the LG OLED 65C9PLA have a built-in tuner?

Yes, the TV features a built-in DVB-T2/C/S2 tuner, enabling you to access over-the-air channels and cable/satellite signals without the need for an additional set-top box.

Does the LG OLED 65C9PLA support voice control?

Yes, the TV supports voice control through LG's ThinQ AI technology. You can control the TV using voice commands or integrate it with other smart home devices.

Is the LG OLED 65C9PLA wall-mountable?

Yes, the LG OLED 65C9PLA is compatible with VESA wall-mount standards, allowing you to mount it on a compatible wall bracket.

What gaming features does the LG OLED 65C9PLA offer?

The TV includes gaming-specific features such as HDMI 2.1 ports, variable refresh rate (VRR), Auto Low Latency Mode (ALLM), and support for NVIDIA G-Sync and AMD FreeSync technologies, providing a smooth gaming experience.

Download this PDF Link:LG OLED 65C9PLA 50-Hz 4K TV Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>