FRAMA H1852-W80 Shelf Library Collection Steel Installation Guide
- June 12, 2024
- FRAMA
Table of Contents
FRAMAH1852-W80 Shelf Library Collection Steel
Product Information
The Shelf Library Collection is made of steel and is designed to provide a versatile storage solution for your space. The collection includes 3 Rail options, 7 Shelf options, 11 Single Shelf option, and 15 Hanger Shelf option. The parts included in the collection are Rails, Screws, Shelves, Brackets, Bolts, Threaded Inserts, and Hangers.
Rail Parts
- A Rail
- B Screw (x4 for 1084 rail and x5 for 1852 rail)
Shelf Parts
- A Shelf
- B Bracket (x2)
- C Bolt (x4)
- Threaded D Insert (x2)
- E Bolt (x1)
Single Shelf Parts
- A Shelf
- B Bracket (x2)
Hanger Shelf Parts
- A Shelf
- B Hanger (x1)
- C Bracket (x2)
- D Bolt (x4)
- Threaded E Insert (x2)
- F Bolt (x3)
Product Usage Instructions
Assembly Guide for Rails
- Place the first rail A on the desired position on the wall and put the screw B into the wall through the top hole. Depending on the wall type, pre-drilling and wall plug (not included) may be required. Use the top hole as an anchor point and level the rail straight. Then mark the screw hole with a pencil or a sharp tool on the wall. The logo text should be on the bottom side.
- Finish mounting the first rail by putting the screws B into the marked position. Measure the distances for the second rail A, then mount the second rail by repeating the same process.
- To extend the system, repeat the same process for additional rails.
Assembly Guide for Shelves
- Start by inserting bracket ends B into the holes on the shelf A.
- Place the shelf at a desired position in the rail and secure the bracket B to the rail by fastening the bolts C to the threaded hole in the rail. Note that the back side of the shelf should be placed against the rail, not to the wall.
Assembly Guide for Single Shelves
-
Start by inserting bracket ends B into the holes on the shelf A.
-
Make sure that the brackets are placed on the correct side.
Place the complete shelf against the wall, level it straight, and then mark screw holes with a pencil or a sharp tool on the wall. -
Put screws into the marked position on the wall, then hang the bracket on. Depending on the wall type, pre-drilling and wall plug (not included) may be required.
Assembly Guide for Hanger Shelves
- Screw the hanger bolts F into the hanger B through the shelf A.
- Insert bracket ends C into the holes on the shelf A.
- Place the shelf at a desired position in the rail and secure the bracket C to the rail by fastening the bolts D to the threaded hole in the rail. Note that the back side of the shelf should be placed against the rail, not to the wall.
For detailed care and maintenance instructions for FRAMA products, you can scan the QR code using your mobile device or access the guide on your desktop at framacph.com/pages/material-care-guide.
For any further assistance or inquiries, please contact FRAMA at Fredericiagade 57, 1310 Copenhagen K or call +45 3140 6030. You can also visit their website at framacph.com.
PARTS
TOOLS
INSTRUCTION
Place the first rail A on the desired position on the wall and put the screw B
into the wall through the top hole. Depends on the wall type, pre-drilling and
wall plug (not included) maybe required.
Use the the top hole as an achor point and level the rail straight then mark
the screw hole with a pencil or a sharp tool on the wall.
The logo text should be on the bottom side
Finish mounting the first rail by putting the screws B into the marked
position.
Measure the distances for the second rail A , then mount the second rail by
repeating the same process on page 4.
- 40 cm shelf = 38.4 cm
- 60 cm shelf = 58.4 cm
- 80 cm shelf = 78.4 cm
To extend the system, repeat the same process on page 4 and 5.
SHELF
PARTS
Only A , B , C are required for this assembly.
Start by inserting bracket ends B into the holes on the shelf A .
Place the shelf at a desired position in the rail, secure the bracket B to the rail by fastening the bolts C to the threaded hole in the rail.
Note that the back side of the shelf should be placed against the rail not to the wall.
SINGLE SHELF
PARTS
Start by inserting bracket ends B into the holes on the shelf A .
Make sure that the brackets are placed correct side.
Place the complete shelf against the wall, level it straight then mark screw
holes with a pencil or a sharp tool on the wall.
Put screws into the marked position on the wall, then hang the bracket on. Depends on the wall type, pre-drilling and wall plug (not included) maybe required.
HANGER SHELF
PARTS
Only A , B , C , D , F are required for this assembly.
Start by screwing the hanger bolts F into the hanger B though the shelf A .
Insert bracket ends C into the holes on the shelf A .
Place the shelf at a desired position in the rail, secure the bracket C to the rail by fastening the bolts D to the threaded hole in the rail.
Note that the back side of the shelf should be placed against the rail not to the wall.
Care & Maintenance Guide
In order to preserve your new FRAMA pieces for years to come, we’ve produced a guide on the materials we use and how to best care for them. Following these instructions will help to maintain the appearance and quality of your items after repeated use and cleaning.
For material care and maintenance instructions, scan the QR code using your mobile device.
Access the guide on your desktop at framacph.com/pages/material-care- guide
FRAMA
Fredericiagade 57, 1310 Copenhagen K
+45 3140 6030 framacph.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>