milwaukee 58-22-2004d5 Intrinsically Spot Flood Headlamp Instructions
- June 12, 2024
- Milwaukee
Table of Contents
milwaukee 58-22-2004d5 Intrinsically Spot Flood Headlamp Instructions
IMPORTANT SAFETY INSTRUCTIONS
⚠ WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. When using electric appliances, basic precautions should always be followed, including the following:
Before using the light, read this operator’s manual and all labels on the light.
- Read and understand all the instructions before using the appliance.
- To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
- Store idle light out of reach of children. Warm lights can become hazardous in the hands of children.
- Know your light. Read this manual carefully to learn your light’s applications and limitations as well as potential hazards associated with this type of light.
- This tool is designed to be powered by 3-AAA Energizer E92 or Duracell MN2400 batteries properly inserted into the tool. Do not attempt to use with any other voltage or power supply.
- Do not leave batteries within the reach of children.
- Do not mix new and used batteries.
- Do not mix brands (or types within brands) of batteries.
- Do not use rechargeable batteries.
- Install batteries according to polarity (+ / -) diagrams.
- Properly dispose of used batteries immediately.
- Do not incinerate or dismantle batteries.
- Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not dispose of tool or batteries together with household waste material! Appliance and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
- To prevent the risk of fire or explosion, do not open battery compartment in a hazardous atmosphere. Only change batteries in known non-hazardous areas.
- Use only identical replacement parts. Other parts or substitutions may impair this products intrinsic safety.
- Always confirm the ratings of this product with the known or potentially hazardous environment in which it will be used.
- Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Cat. No. …………………………………………………………………………………….. 2004HZL
Volts……………………………………………………………………………………………… 4.5 DC
Battery Type ……………………………………………………………………….. LR03 / AAA x3
Recommended Ambient Operating Temperature …………………………. -4°F to 104°F
Complies with …………..ANSI/UL STD 913-8th Ed, ANSI/UL 60079-0-7th Ed, ANSI/
UL 60079-11-6th Ed, CAN/CSA STD C22.2 No. 60079-0:2019, IEC 60079-0, 7th Ed
(2017-12)+Corr.1(2020-01)+I-SH 01(2019-04)+I-SH 02(2019-06), IEC 6007911, 6th
Ed (2011-06)+Corr.1(2012-01)+I-SH 01(2014-10)+I-SH 02(2016-07)+I-SH
03(2016-07)+I-SH 04(2019-04)+I-SH 05(2019-08)+I-SH 06(2019-12), CENELEC IEC EN
60079-0: 2018, EN 60079-11:2012
CLASS I, II, III / DIVISION 1
Headlight for Use in Hazardous Locations
Class I Div 1 GRPS A-D T4
Class II & III Div 1 GRPS E-G
Class I Zone 0 AEx ia IIC T4 Ga
Ex ia IIC T4 Ga
C US
II 1 G Ex ia IIC T4 Ga
DEMKO 20 ATEX 2338 UL23UKEX2820
LISTED E503502
IECEx UL 20.0011 -20°C < Tamb < +40°C
1.5V/Cell / Energizer E92 or Duracell MN2400
SYMBOLOGY
ASSEMBLY
Changing Batteries
⚠ WARNING
To prevent the risk of fire or explosion, do not open battery compartment in a
hazardous atmosphere. Only change batteries in known non-hazardous areas.
Only use Energizer E92 or Duracell MN2400 batteries. If the light will not be used for a long time, remove the batteries as a protection against corrosion. To change the batteries:
- Use the 3 mm hex wrench to loosen the locking screw on the back of the light. Open the battery compartment.
- Insert the three AAA batteries according to the polarity marked in the compartment.
- Close the battery compartment. Use the 3 mm hex wrench to tighten the locking screw. Hand tighten securely; do not over tighten.
OPERATION
CAUTION To reduce the risk of injury, do not stare at the operating light source.
Straps
Select the desired strap (rubber or elastic). Clip the light onto the strap
and use the buckle to adjust the strap to the required size. Use the included
clips to attach the strap to a hard hat.
Clip
To attach the headlamp directly to the hard hat clip with adhesive-backed
fastener strips, first wipe headlamp and clip with soap and water. Rinse
thoroughly.
WARNING! Never immerse tool in liquid. Remove the adhesive backing and press
fastener strips firmly onto clip and headlamp.
Using the Headlamp
Press the power button to turn the light on and off. Press the MODE button to
cycle through Spot/Flood, Flood High, Flood Medium, Flood Low, and Spot.
Rotate the light up or down as needed.
MAINTENANCE
⚠ WARNING To reduce the risk of injury, always remove the battery before
performing any maintenance. Never disassemble the tool.
Contact a MILWAUKEE service facility for ALL issues.
Maintain light
Keep your light in good condition by adopting a regular maintenance program.
If the light does not work properly, return the light to a MILWAUKEE service
facility.
⚠ WARNING To reduce the risk of personal injury and damage, never immerse
your tool in liquid or allow a liquid to flow inside.
Cleaning
Keep tool handles clean, dry and free of oil or grease. Use only mild soap and
a damp cloth to clean the tool since certain cleaning agents and solvents are
harmful to plas- tics and other insulated parts. Some of these include
gasoline, turpentine, lacquer thin- ner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents containing ammonia. Never use
flammable or combustible solvents around tools.
ACCESSORIES
⚠ WARNING Use only recommended accessories. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a
distributor.
LIMITED WARRANTY – USA & CANADA
Every MILWAUKEE Personal Lighting Product (see exceptions below) is warranted
to the original purchaser only to be free from defects in material and
workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace
any part on a personal lighting product which, after examination, is
determined by MILWAUKEE to be defective in material or workmanship for the
lifetime of the personal lighting product. Return of the personal lighting
product to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized
Service Station, freight prepaid and insured, is required. A copy of the proof
of purchase should be included with the return product. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs made or attempted
by anyone other than MILWAUKEE authorized personnel, misuse, alterations,
abuse, normal wear and tear, lack of maintenance, accidents, or caused by
alkaline batteries.
Normal Wear: This warranty does not cover repair or replacement when normal
use has exhausted the life of a part including, but not limited to clips,
straps, charging cables, wall plugs, and rubber gaskets. This warranty does
cover the LED in the personal lighting products, subject to the limitations
herein.
This warranty does not cover Cordless Battery Packs or Chargers. There are separate and distinct warranties available for these products. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. This warranty applies to product sold in the U.S.A. and Canada only. Please consult the Find a Service Center Search in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.
References
- Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
- Milwaukee® Tool Official Site | Nothing but HEAVY DUTY®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>