SortWise SW-POCS-MG004-L 2-Tier Left Opening Kitchen Cabinet Instruction Manual

SortWise SW-POCS-MG004-L 2-Tier Left Opening Kitchen Cabinet

Product Information

This product is a swing tray assembly designed for cabinets. It consists of various components including a middle tube holder, side supports, gas supports, long arm supports, short arm supports, plastic clips, and screws.

• Size of Product: 2054mm (Width) x 520mm (Depth) x 450mm (Height)
• Contents:
  • 1 Middle Tube Holder
  • 2 Trays
  • 5 Side Supports
  • 2 Gas Supports
  • 2 Long Arm Supports
  • 2 Soft Dampers
  • 4 Short Arm Supports
  • 8 Plastic Clips
  • 4 ST4*16 Screws
  • 2 M5*20 Screws
  • 4 M5*10 Screws
  • 8 M4*6 Screws

Product Usage Instructions

1. Fix the bottom and top of the middle tube holder to the cabinet using 5 ST4*16 screws each.
2. Fix the middle tube holder to the cabinet using 2 M5*20 screws.
3. Fix the side support to the cabinet using 4 ST4*16 screws.
4. Attach one long arm support to the middle tube holder using 4 M5*10 screws.
5. Attach the other long arm support to the middle tube holder using 4 M5*10 screws.
6. Attach one short arm support to the side support using 4 M5*10 screws.
7. Attach the other short arm support to the side support using 4 M5*10 screws.
8. Attach the gas supports to the long arm supports and short arm supports using 2 M4*6 screws each.
9. Insert the 2 trays into the long-arm supports and short-arm supports.
10. Attach the 2 gas supports one by one as shown in Drawing NO.
11. Click the 4 plastic clips one by one on one side of the long arm supports and short arm supports as shown in Drawing NO. 2.

INSTALLATION INSTRUCTION

Size of Product WDH| Min Door Open| Min Cabinet Height| Min Net Depth

of cabinet D

---|---|---|---
32f x17”x(26″ ~ 30″)

81Qx 427x(650~ 750mm)

| 1621″

414mm

| 28″

700mm

| 2(P 4 s “

520mm

Contents

 | II| III
1- Middle Tube holder   1pc

2- Tray 2pc

3- Long Arm Support   2pc 4-Short Arm Support 2pc

| 5- Side Support 1pc

6- Gas Support   2pc

?-Soft Damper 2pcs 8-Plastic Clip    4pcs

| M46   8pcs M510 16pcs M520  2pcs ST416 14pcs

1. Fix the side support and cabinet with 4pcs screws ST4*16 as the requested size shown as the picture.
2. Fix the bottom of middle tube holder and cabinet with 5pcs screws ST 416 as the requested size, fix the top of middle tube holder and cabinet as same , then fix the middle tube holder with 2pcs screws M520 shown as the picture.
3. Fix one long arm support with middle tube holder with 4pcs screws M5*10 as show in picture, the fix another one long arm support as same shown as the picture.
4. Fix one short arm support with side support with 4pcs screws M5*10 as show in picture , the fix another one short arm support as same shown as the picture.
5. Fix the gas support and 2pcs long arm support & 2pcs short arm support with 2pcs screws M4*6 each shown as the picture.
6. insert the 2pcs tray into the long arm supports & short arm supports shown in the picture. picture.
7. Fix the 2pcs gas supports one by one shown as in Drawing NO. 1.
8. Click the 4pcs plastic clips one by one on one side of the long arm support & short arm support shown in Drawing NO. 2.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>