PYLE PMNGSP1BK Portable Wireless BT Streaming Mini Speaker User Guide

PYLE PMNGSP1BK Portable Wireless BT Streaming Mini Speaker

Product Information

Product Name: Pyle PMNGSP1BK

FCC Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Product Usage Instructions

1. Ensure that the Pyle PMNGSP1BK device is properly connected to a power source or has a sufficient battery charge.
2. Place the device in a suitable location where it can operate without obstruction.
3. Power on the device using the designated power button or switch.
4. Follow the specific instructions for your desired usage, such as connecting external devices or adjusting settings.
5. Use the device according to its intended purpose, taking into consideration any safety guidelines provided in the user manual.
6. If experiencing interference or undesired operation, try repositioning the device or adjusting its settings to minimize the impact of external interference.
7. Do not make any changes or modifications to the device that are not expressly approved by the responsible party for compliance. Doing so may void the user’s authority to operate the equipment.
8. To ensure compliance with FCC regulations, avoid using the device in a manner that may cause harmful interference to other devices.
9. When not in use, power off the device and store it in a safe and dry location.

Portable Wireless BT Streaming Mini Speaker

IPX7 Waterproof Wireless Speaker for Outdoor Play Building Necronsone

WIRELESS BT CONNECTION

Step 1:
Press and hold seconds to power ON. The speaker enters into BT searching status and the blue indicator starts blinking.

Step 2:
Choose the Device Find the PYLEUSA from the BT name list on your phone.

Ste p 3: Pairing Successful The indicator light will stay blue once pairing is done, then you can play music.

AUX-IN Connection

The speaker also features 1*AUX audio in port, simply connect the speaker with your mobile phone/MP3 player/PC/Laptop with the 3.5mm jack audio cable. The green light will be ON and you can play music via wired connection.

Magnetic Adsorption

Attention: This product contains a strong magnet. Please keep a safe distance from products that are sensitive to magnets.

Elastic Strap

Basic Operation

BT Mode

1. Press and hold for 3 seconds to Power ON/OFF
2. Short press to Play/Pause
3. Short press to answer incoming call.
4. Short press twice to reject call
5. Short press to hang up during the call.
6. Short press for volume up
7. Press and hold for previous track
8. Short press for volume down
9. Press and hold for next track

AUX IN Mode

• Short press it for Play/Pause
• Short press for volume up
• Short press for volume down

LED Operation

• Power On: The default mode is BT mode.
• Blue light flashes and stays in searching status. If a 3.5mm Aux cable is attached, it will enter AUX mode and the green light will be ON.
• BT Mode: Play/Pause Blue light stays on.
• The blue indicator light keeps flashing if your BT device is out of range. The speaker will turn OFF automatically if no connection in 10 mins.
• AUX IN Mode: Green light is normally on

Technical Specs

• Construction Material: ABS
• Play Time: 6-7 hours at 70% volume level
• Speaker Unit: 7W/4O
• Power Cable Length: 2.13ft
• BatteryType: Lithium Battery, Rechargeable
• Impedance: 4Ohms
• Frequency response: 68Hz-12kHz
• Battery Capacity: 3.7V/2200mAh
• S/N ratio: 2-:70dB
• Charging Time: 3-3.5 hours
• Working Time: 6-7 hours (70% volume level)
• Charging Current: 5V/1A
• Product Dimensions (L x W x H): 6.26″ x 6.26″ x 1.97″ -inches

FREQUENTLY ASKED QUESTIONS

Q: What kind of charger should we use for the speaker?

• A: All common USB chargers can be used, while we suggest the ones 5V/1A.

Q: What if there’s noise or discontinuous sound during playing?

• A: The speaker can be normally used within 10m under no obstruction environment.
• If it is beyond 10m or with obstruction, there might be noise or discontinuous sound.

Q: Why the speaker powers off automatically while using?

• A: When there is no BT pairing in 10 minutes, the speaker will shut down automatically to reduce power consumption.

Q: Why does the speaker cannot connect the once-paired cellphone?

• A: First, remove the speaker’s paired name from the cellphone’s BT List and then restart pairing mode.

Q: What is the working sequence of the speaker?

• A: The priority is AUX IN input, phone call in BT mode and then playing music in BT mode.

Q: The speaker doesn’t start up in a normal situation.

• A: Please plug in the charger and try in a few minutes.

California Prop 65 Warning

• This product contains Phthalotes which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.
• For more Info go to: www.P65warnlngs.ca.gov
• Questions? Issues?
• We are here to help!
• Phone: (1)718-535-1800
• Email:support@pyleusa.com

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
   this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

PyleUSA.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>