LG 55US340C0UD Smart LED TV User Guide
- June 12, 2024
- LG
Table of Contents
LG 55US340C0UD Smart LED TV
Product Information
- Product Name: LED TV
- Model Numbers: 50US340C0UD, 55US340C0UD, 65US340C0UD –
- Manufacturer: LG – Website: www.lg.com
Product Usage Instructions
Safety Instructions:
Before operating the TV, read the owner’s manual carefully and retain it for
future reference.
- Do not use the TV if the power supply cord or plug is damaged, if liquid has been spilled on it, if objects have fallen into it, if it has been exposed to rain or moisture, if it does not operate normally, or if it has been dropped.
- If any of the above situations occur, refer to qualified service personnel.
- To reduce the risk of electric shock, do not remove the cover or back of the TV as there are no user-serviceable parts inside. Refer to qualified service personnel. – Do not expose the TV to rain or moisture to reduce the risk of fire and electric shock.
- Keep the TV away from flammable objects such as gasoline or candles and do not expose it to direct air conditioning.
- Install the TV in a location that is not excessively dusty and out of the reach of children.
- Do not short circuit, disassemble, or overheat the batteries. Do not dispose of batteries in a fire and keep them away from excessive heat. Replace batteries only with the correct type.
Preparing:
- Ensure that all the necessary cables are securely connected to the TV and other devices.
- Make sure that the power is turned on and the TV is receiving a signal from the connected devices.
- Adjust the TV settings according to your preferences using the remote control and on-screen menu.
Optional Extras:
- Optional extras such as wall mounting brackets may be available for purchase. Contact your dealer for more information on compatible accessories.
- When wall mounting the TV, make sure to use screws and wall mounts that meet the VESA standard. Refer to the owner’s manual for the standard dimensions of the wall mount kits.
Note: The provided text-extract does not include complete product information or usage instructions. Please refer to the full user manual for detailed instructions on installation, operation, and troubleshooting.
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
LED TV 50US340C0UD 55US340C0UD 65US340C0UD
a X4 (M4 X L16) 50/55US340C*
b X6 (M4 X L20) 65US340C*
Depending upon model / Según el modelo / Selon le modèle Printed in Korea
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
1
2
4
BB AA
3
B
B
A
B
A
5 50/55US340C*
6 65US340C*
BB
a
B
BB
B
A
b
B
B
A
7
8
B A
EXTERNAL SPEAKER OUT
RS-232C IN
(CONTROL & SERVICE)
MFL71710702
(2005-REV00)
Kg
50US340C0UD
1,130 (44.4)
1 130 (44,4)
722 (28.4)
722 (28,4)
231 (9.0)
231 663 663 86.3 (9,0) (26.1) (26,1) (3.3)
55US340C0UD
1,244 (48.9)
1 244 (48,9)
786 (30.9)
786 (30,9)
231 (9.0)
231 726 726 87.1 (9,0) (28.5) (28,5) (3.4)
65US340C0UD
1,463 (57.5)
1 463 (57,5)
914 (35.9)
914 (35,9)
269 (10.5)
269 (10,5)
850 (33.4)
850 (33,4)
87.8 (3.4)
86,3 11.5 11,5 11.3 11,3 (3,3) (25.3) (25,3) (24.9) (24,9)
140 W
87,1 14.5 14,5 14.3 14,3 (3,4) (31.9) (31,9) (31.5) (31,5)
160 W
87,8 21.6 21,6 21.3 21,3 (3,4) (47.6) (47,6) (46.9) (46,9)
195 W
AC 120 V ~ 50 / 60 Hz
OWNER’S MANUAL
Safety and Reference
LED TV*
- LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
43US340C0UD 50US340C0UD 55US340C0UD 65US340C0UD 75US340C0UD 86US340C0UD
75US340C2UD
MFL71710902
(2104-REV02)
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved. Printed in Korea
ENGLISH
Important Safety Instruction
Read these instructions. · Keep these instructions. · Heed all warnings. ·
Follow all instructions. · Do not use this apparatus near water. · Clean only
with dry cloth. · Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions. · Do not install near any heat sources
such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. · Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. · Protect the power cord
from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus. · Only use
attachments/accessories specified by the manufacturer. · Use only with the
cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
· Unplug this apparatus during lightning storms or when unused for long
periods of time. · Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
2
ENGLISH
Warning! Safety instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons. The symbol is
intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
device. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
· TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
· Do not place the TV and/or remote control in the following environments: –
Keep the product away from direct sunlight. – An area with high humidity such
as a bathroom – Near any heat source such as stoves and other devices that
produce heat. – Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil. – An area exposed to rain or wind. – Do not expose to
dripping or splashing and do not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
– Near flammable objects such as gasoline or candles, or expose the TV to
direct air conditioning.
– Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/ explosion,
malfunction or product deformation. · Ventilation – Install your TV where
there is proper ventilation.
Do not install in a confined space such as a bookcase. – Do not install the
product on a carpet or cushion. – Do not block or cover the product with cloth
or other materials while unit is plugged in. · Take care not to touch the
ventilation openings. When watching the TV for a long period, the ventilation
openings may become hot. · Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point where the
cord exits the device. · Do not move the TV while the Power cord is plugged
in. · Do not use a damaged or loosely fitting power cord. · Be sure to grasp
the plug when unplugging the power cord. Do not pull on the power cord to
unplug the TV. · Do not connect too many devices to the same AC power outlet
as this could result in fire or electric shock. · Disconnecting the Device
from the Main Power – The power plug is the disconnecting device. In case of
an emergency, the power plug must remain readily accessible. · Do not let your
children climb or cling onto the TV. Otherwise, the TV may fall over, which
may cause serious injury.
3
ENGLISH
· Outdoor Antenna Grounding (Can differ by country): – If an outdoor antenna
is installed, follow the precautions below. An outdoor antenna system should
not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can come in contact with such power lines or
circuits as death or serious injury can occur. Be sure the antenna system is
grounded to provide some protection against voltage surges and built-up static
charges Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit,
connection to grounding electrodes and requirements for the grounding
electrode. Antenna grounding according to the National Electrical Code, ANSI/
NFPA 70
· Grounding (Except for devices which are not grounded.) – TV with a three-
prong grounded AC plug must be connected to a three-prong grounded AC outlet.
Ensure that you connect the earth ground wire to prevent possible electric
shock.
· Never touch this apparatus or antenna during a lightning storm. You may be
electrocuted.
· Make sure the power cord is connected securely to the TV and wall socket if
not secured damage to the Plug and socket may occur and in extreme cases a
fire may break out.
· Do not insert metallic or inflammable objects into the product. If a foreign
object is dropped into the product, unplug the power cord and contact the
customer service.
· Do not touch the end of the power cord while it is plugged in. You may be
electrocuted.
· If any of the following occur, unplug the product immediately and contact
your local customer service. – The product has been damaged. – If water or
another substance enters the product (like an AC adapter, power cord, or TV).
– If you smell smoke or other odors coming from the TV. – When lightning
storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power source is
connected to the unit if not unplugged in. · Do not use high voltage
electrical equipment near the TV (e.g., a bug zapper). This may result in
product malfunction. · Do not attempt to modify this product in any way
without written authorization from LG Electronics. Accidental fire or electric
shock can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to operate this
product. · Use only an authorized attachments / accessories approved by LG
Electronics. Otherwise, this may result in fire, electric shock, malfunction,
or product damage. · Never disassemble the AC adapter or power cord. This may
result in fire or electric shock. · Handle the adapter carefully to avoid
dropping or striking it. An impact could damage the adapter. · To reduce the
risk of fire or electrical shock, do not touch the TV with wet hands. If the
power cord prongs are wet or covered with dust, dry the power plug completely
or wipe dust off. · Batteries – Store the accessories (battery, etc.) in a
safe
location out of the reach of children. – Do not short circuit, disassemble, or
allow the
batteries to overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat. – Caution: Risk of fire or explosion if the
battery is replaced by an incorrect type.
4
ENGLISH
· Moving – When moving, make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more people to carry larger
TVs. Do not press or put stress on the front panel of the TV. Otherwise, this
may result in product damage, fire hazard or injury.
· Keep the packing anti-moisture material or vinyl packing out of the reach of
children.
· Do not allow an impact shock, any objects to fall into the product, and do
not drop anything onto the screen.
· Do not press strongly upon the panel with a hand or a sharp object such as a
nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
· Cleaning – When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not
clean your TV with chemicals including glass cleaner, any type of air
freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner,
benzene, alcohol etc., which can damage the product and/or its panel.
Otherwise, this may result in electric shock or product damage.
Preparing
· When the TV is turned on for the first time after being shipped from the
factory, initialization of the TV may take approximately one minute.
· Image shown may differ from your TV. · Your TV’s OSD (On Screen Display) may
differ
slightly from that shown in this manual. · The available menus and options may
differ from
the input source or product model that you are using. · New features may be
added to this TV in the future.
· The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the device
and unplugging the power cord.
· The items supplied with your product may vary depending upon the model.
· Product specifications or contents of this manual may be changed without
prior notice due to upgrade of product functions.
· For an optimal connection, HDMI cables and USB devices should have bezels
less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
· Use an extension cable that supports USB 2.0 if the USB cable or USB flash
drive does not fit into your TV’s USB port.
· Use a certified cable with the HDMI logo attached. · If you do not use a
certified HDMI cable, the screen
may not display or a connection error may occur.
(Recommended HDMI cable types) – Ultra High Speed HDMI®/TM cable (3 m (9.84
feet)
or less)
B A
B A
- A 10 mm (0.39 inches)
- B 18 mm (0.7 inches)
· Do not use any unapproved items to ensure the safety and lifespan of the
product.
· Any damages or injuries by using unapproved items are not covered by the
warranty.
5
ENGLISH
Optional Extras
Optional extras can be changed or modified for quality improvement without any
notification. Contact your dealer for buying these items. These devices work
only with certain models. The model name or design may be changed due to the
manufacturer’s circumstances or policies. (Depending upon model)
Wall Mounting Bracket
Make sure to use screws and wall mounts that meet the VESA standard. Standard
dimensions for the wall mount kits are described in the following table.
A B
Lifting and Moving the TV
When moving or lifting the TV, read the following to prevent the TV from being
scratched or damaged and for safe transportation regardless of its type and
size. · It is recommended to move the TV in the box or
packing material that the TV originally came in. · Before moving or lifting
the TV, disconnect the
power cord and all cables. · When holding the TV, the screen should face away
from you to avoid damage.
· Hold the top and bottom of the TV frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grille area.
Model
43US340C0UD 55US340C0UD 50US340C0UD
VESA (A x B)
200 x 200
300 x 300
Standard screw M6
M6
Number of screws 4
4
Wall mount
LSW240B
OLW480B
bracket (optional) MSW240
MSW240
75US340C0UD
Model
65US340C0UD 86US340C0UD
VESA (A x B)
300 x 300
Standard screw M6
Number of screws 4
Wall mount bracket (optional)
OLW480B
75US340C2UD 600 x 400 M8 4
LSW640B
· Use at least two people to move a large TV.
6
ENGLISH
· When transporting the TV by hand, hold the TV as shown in the following
illustration.
· When transporting the TV, do not expose the TV to jolts or excessive
vibration.
· When transporting the TV, keep the TV upright; never turn the TV on its side
or tilt towards the left or right.
· When handling the TV, be careful not to damage the protruding buttons.
· Avoid touching the screen at all times, as this may result in damage to the
screen.
· Do not place the product on the floor with its front facing down without
padding. Failure to do so may result in damage to the screen.
· Do not move the TV by holding the cable holders, as the cable holders may
break, and injuries and damage to the TV may occur. (Depending upon model)
· When attaching the stand to the TV set, place the screen facing down on a
cushioned table or flat surface to protect the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table. – Leave a 10 cm
(4 inches) (minimum) space from the wall for proper ventilation.
10 cm
10 cm
(4 inches)
10 cm
10 cm
10 cm
(Depending upon model)
2 Connect the power cord to a wall outlet.
· Do not apply foreign substances (oils, lubricants, etc.) to the screw parts
when assembling the product. (Doing so may damage the product.)
· If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which may
cause injury.
· Do not use any unapproved items to ensure the safety and product life span.
· Any damage or injuries caused by using unapproved items are not covered by
the warranty.
· Make sure that the screws are fastened tightly. (If they are not fastened
securely enough, the TV may tilt forward after being installed.)
· Do not fasten the screws with excessive force otherwise they may be worn out
and become loose.
7
ENGLISH
Using the Kensington Security System (optional)
(Depending upon model) The Kensington security system connector is located at
the rear of the TV. For more information of installation and using, refer to
the manual provided with the Kensington security system or visit
http://www.kensington.com. Connect the Kensington security system cable
between the TV and a table.
Securing TV to the Wall
· The Kensington security system is optional. You can obtain additional accessories from your local dealer.
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the
TV. – If there are bolts inserted at the eye-bolts position, remove the bolts
first.
2 Mount the wall brackets with the bolts to the wall. Match the location of
the wall bracket and the eyebolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the flat surface.
· Use a platform or cabinet that is strong and large enough to support the TV
securely.
· Brackets, bolts, and ropes are optional. You can obtain additional
accessories from your local dealer.
8
ENGLISH
Mounting on a Wall
An optional wall mount can be used with your LG Television. Consult with your
local dealer for a wall mount that supports the VESA standard used by your TV
model. Carefully attach the wall mount bracket at the rear of the TV. Install
the wall mount bracket on a solid wall perpendicular to the floor. If you are
attaching the TV to other building materials, please contact qualified
personnel to install the wall mount. Detailed instructions will be included
with the wall mount. We recommend that you use an LG brand wall mount. The LG
wall mount is easy to adjust or to connect the cables. When you do not use
LG’s wall mount bracket, use a wall mount bracket where the device is
adequately secured to the wall with enough space to allow connectivity to
external devices. If you are using a non-adjustable mount, attach the mount to
the wall. Attach the cables to the TV first, then attach the TV to the mount.
10 cm
10 cm
(4 inches)
10 cm 10 cm
10 cm
(Depending upon model)
· Remove the stand before installing the TV on a wall mount by performing the
stand attachment in reverse.
· For more information of screws and wall mount bracket, refer to the Separate
purchase.
· If you intend to mount the product to a wall, attach VESA standard mounting
interface (optional parts) to the back of the product. When you install the
set to use the wall mounting bracket (optional parts), fix it carefully so as
not to drop.
· When mounting a TV on the wall, make sure not to install the TV by hanging
the power and signal cables on the back of the TV.
· Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
· When installing the wall mounting bracket, it is recommended to cover the
stand hole using tape, in order to prevent the influx of dust and insects.
(Depending upon model)
Stand hole
9
ENGLISH
Connections
You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the
following. The illustrations may differ from the actual items and an RF cable
is optional. · Make sure not to bend the copper wire of the RF
cable.
Copper wire
· Complete all connections between devices, and then connect the power cord to
the power outlet to prevent damage to your TV.
· Use a signal splitter to use 2 TVs or more. · This TV cannot receive ULTRA
HD (3840 x 2160
pixels) broadcasts directly because the related standards have not been
confirmed. (Depending upon model)
Other connections
Connect your TV to external devices. For the best picture and audio quality,
connect the external device and the TV with the HDMI cable.
HDMI
· Supported HDMI Audio format: (Depending upon model) DTS (44.1 kHz / 48 kHz /
88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz
/ 192 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
· DTV Audio Supported Codec: MPEG, Dolby Digital · (Settings) ( ) [Picture]
[Additional
Settings] [HDMI ULTRA HD Deep Color] – On: Support 4K @ 60 Hz (4:4:4, 4:2:2,
4:2:0) – Off: Support 4K @ 60 Hz 8 bit (4:2:0) If the device connected to
Input Port also supports ULTRA HD Deep Color, your picture may be clearer.
However, if the device doesn’t support it, it may not work properly. In that
case, change the TV’s [HDMI ULTRA HD Deep Color] setting to off. – This
feature is available only on certain models
which support HDMI ULTRA HD Deep Color.
USB
· Some USB Hubs may not work. If a USB device connected through a USB Hub is
not detected, connect it directly to the USB port on the TV.
· It is recommended that you use a USB hub or USB HDD with a power supply. (If
the power supplied is not sufficient, the USB storage device may not be
detected properly.)
· It is recommended that you use an external USB HDD with a rated voltage of 5
V of less and a rated current of 500 mA or less.
10
ENGLISH
External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and other
external devices. · The external device connections shown may differ
slightly from illustrations in a manual. · Connect external devices to the TV
regardless about
the order of the TV port. · If you connect a gaming device to the TV, use the
cable supplied with the gaming device. · Refer to the external equipment’s
manual for
operating instructions. · In PC mode, there may be noise associated with the
resolution, vertical pattern, contrast or brightness. If noise is present,
change the PC output to another resolution, change the refresh rate to another
rate or adjust the brightness and contrast on the [Picture] menu until the
picture is clear. Depending upon the graphics card, some resolution settings
may not allow the image to be positioned on the screen properly. · When
connecting via a wired LAN, it is recommended to use a CAT 7 cable. (Depending
upon model)
External Speakers
EXTERNAL SPEAKER OUT
or SPEAKER OUT
LINE OUT
VOLUME CONTROL
Control port for Speaker out
UP
–
DOWN
GND RIGHT
LEFT GND
: Depending upon model · Use only with the 3 pole 3.5 mm stereo jack. · Do not
connect your headphones or earphones to
the port for connecting an external speaker.
11
ENGLISH
Method of volume control port
(Depending upon model) · Cable Spec.
Each Up / Down pin is pulled to 3.3 V with CPU GPIO.
GND / UP / DOWN
CPU detects transition from 3.3 V to GND level for volume control.
Network setup
(Depending upon model)
Wired network connection
This TV can be connected to a Pro:Centric server via the port. After making
the physical connection, the TV needs to be set up for network communication.
Connect the port of the Modem or Router from Pro:Centric server to the port on
the TV.
2
1
Broadband Modem
Broadband Modem Pro:Centric Server
Router
Broadband Modem
Pro:Centric Server
1 Connect the port of the Modem or Router to the port on the TV.
2 Connect the port of the PC to the port on the TV. (Depending upon model)
· Do not connect a modular phone cable to the port.
· Since there are various connection methods, please follow the specifications
of your telecommunication carrier or internet service provider.
12
ENGLISH
Using the Button
You can simply operate the TV functions, using the button.
Adjusting the Menu When the TV is turned on, press the button one time. You
can adjust the Menu items using the button.
Turns the power off. Changes the input source. Scrolls through the saved
channels.
Adjusts the volume level.
Basic Functions
Power On (Press) Power Off 1 (Press and Hold) Menu control (Press 2) Menu
selection (Press and Hold 3)
1 All running apps will close. 2 You can access and adjust the menu by
pressing
the button when TV is on. 3 You can use the function when you access menu
control.
13
ENGLISH
Using Remote Control
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the and ends to the label inside the compartment, and close the
battery cover. To remove the batteries, perform the installation actions in
reverse. This remote uses infrared light. When in use, it should be pointed in
the direction of the TV’s remote sensor.
- To use the button, press and hold for more than 3 seconds.
(Power) Turns the TV on or off. Returns to the last TV channel.
Activates or deactivates the subtitles. Shows information on the current program. Resizes an image.
(Input) Changes the input source. Number button Enters numbers.
(Dash) Inserts a dash between numbers such as 2-1 and 2-2.
Accesses the saved channel list. Alternates between the two last channels
selected (pressing repeatedly). Adjusts the volume level.
Accesses your favorite channel list. Not functional.
(Mute) Mutes all sounds. (Mute) * Accesses the [Accessibility] menu.
Scrolls through the saved channels. Moves to the previous or next screen.
Changes the picture mode. (Home) Accesses the Home menu.
Changes the sound mode. (Settings) Accesses the setting menu.
Accesses the setting menu. Navigation button (up / down / left / right) Scrolls through menus or options.
(Some buttons and services may not be provided depending upon models or
regions.)
14
ENGLISH
Selects menus or options and confirms your input. Returns to the previous
screen.
Clears all on-screen displays and returns to TV viewing.
Enables SAP (Secondary Audio Program) Feature.
Digital signal: Changes the audio language.
Analog signal: Changes the MTS sound. Sets the length of time until the TV to
turns off.
, , , , Control buttons for media contents
, , , These access special functions in some menus.
· Do not mix new batteries with old batteries. This may cause the batteries to
overheat and leak.
· Failure to match the correct polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury, or ambient pollution.
· This apparatus uses batteries. In your community there might be regulations
that require you to dispose of these batteries properly due to environmental
considerations. Please contact your local authorities for disposal or
recycling information.
· Batteries inside or inside the product shall not be exposed to excessive
heat such as sunshine, fire or the like.
Troubleshooting
The software may be updated for improvement in performance. The customer is
responsible to ensure the compatibility of their equipment with any LG
Electronics software. If needed, please consult with LG Electronics and update
new software versions according to the guidance provided by LG Electronics. ·
Cannot control the TV with the remote control.
– Check if anything such as tape has been placed over the receiver.
– Check if there is any obstacle between the product and the remote control.
– Replace the batteries with new fresh ones. · No image display and no sound
is produced.
– Check if the product is turned on. – Check if the power cord is connected to
a wall
outlet. – Check if there is a problem in the wall outlet by
connecting other products.
15
ENGLISH
· The TV turns off suddenly. – Check the power control settings. The power
supply may be interrupted. – Check if the auto-off function is activated on
the settings related time. – If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes of inactivity.
· When connecting to the PC (HDMI), no signal is detected. – Turn the TV
off/on using the remote control. – Reconnect the HDMI cable. – Restart the PC
with the TV on.
· Abnormal Display – If the TV feels cold to the touch, there may be a small
flicker when it is turned on. This is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on the screen, appearing as tiny red,
green, or blue spots. However, they have no adverse effect on the TV’s
performance. Avoid touching the LCD screen or holding your finger(s) against
it for long periods of time. Doing so may produce some temporary distortion
effects on the screen. – This panel is an advanced product that contains
millions of pixels. In a very few cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots are deactivated pixels and do not
affect the performance and reliability of the TV. – Displaying a still image
for a prolonged period of time may cause an image sticking. Avoid displaying a
fixed image on the TV screen for an extended length of time.
· Generated Sound – Cracking noise A cracking noise that occurs when watching
or turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where thermal
deformation is required. – Electrical circuit humming/panel buzzing A low
level noise is generated from a highspeed switching circuit, which supplies a
large amount of current to operate a product. It varies depending upon the
product. This generated sound does not affect the performance and reliability
of the product.
· When cleaning the product, be careful not to allow any liquid or foreign
objects to enter the gap between the upper, left or right side of the panel
and the guide panel. (Depending upon model)
· Make sure to wring any excess water or cleaner from the cloth.
· Do not spray water or cleaner directly onto the TV screen.
· Make sure to spray just enough of water or cleaner onto a dry cloth to wipe
the screen.
16
ENGLISH
Settings
To select Picture Mode
(Settings) ( ) [Picture] [Picture Mode Settings] [Picture Mode] Select the
picture mode optimized for the viewing environment or the program. · [Vivid]
Heightens contrast, brightness and
sharpness to display vivid images. · [Standard] Displays images in standard
levels of
contrast, brightness and sharpness. · [APS] APS (Auto power saving) mode
reduces power
consumption by dimming control. · [Cinema] / [Game] Displays the optimum
picture for
a movie or a game. · [Sports] Optimized picture mode for sports
matches. The pitch and kits are presented in vibrant colors, with crystal-
clear images even for fast movements. · [HDR Effect] This feature lets you
enjoy a more dynamic, clearer image by correcting the light and dark areas of
the display. This feature provides a realistic image, even when the source
image’s gradation level is high. If you set Picture Mode to HDR Effect, you
will not be able to use some of Picture Mode Settings. · [Expert] Menu for
adjusting picture quality that allows experts and amateurs to enjoy the best
TV viewing. This menu for adjustment is provided for ISF-certified picture
tuning professionals. (ISF logo can be used only on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified Calibration Control · Depending
upon input signal, the available range of picture modes may differ. · [Expert]
mode is for picture tuning professionals to control and fine-tune using a
specific image. For normal images, the effects may not be drastic. · [Picture
Mode] change may modify [Energy Saving] and [Motion Eye Care] settings and it
can affect energy consumption.
To set additional picture options
(Settings) ( ) [Picture] [Picture Mode Settings] [Picture Options] Adjusts
detailed setting for images. · [Noise Reduction] Eliminates noise in the
picture. · [MPEG Noise Reduction] Eliminates noise generated
while creating digital picture signals. · [Smooth Gradation] It removes the
contour noise of
the part with gradation to show a softer gradation. · [Black Level] Adjusts
the brightness and contrast of
the screen to suit the black level of the input picture by using the blackness
(black level) of the screen. · [Real Cinema] Optimizes the screen for movie
viewing. · [Motion Eye Care] Saves power consumption by adjusting the
brightness corresponding to the movement of the image on the screen. ·
[TruMotion] Corrects- images to display smoother motion sequences. Auto means
juddering and blurring range that depend on input video status is controlled
by TruMotion mode. · Depending upon input signal or other picture settings,
the range of detailed items for adjustment may differ.
To use energy saving feature
(Settings) ( ) [Picture] [Energy Saving] Reduces power consumption by
adjusting peak screen brightness. · [Auto] The TV sensor detects the ambient
lighting
and automatically adjusts the screen brightness. · [Off] Turns off the Energy
Saving. · [Minimum] / [Medium] / [Maximum] Applies the
pre-set Energy Saving. · [Screen Off] Screen is turned off and only sound is
played. Press any button on the remote control to turn the screen back on. ·
Depending on the [Energy Saving] ([Auto] / [Maximum]), you may not be able to
adjust the [Backlight]. In this case, navigate to (Settings)
( ) [Picture] [Energy Saving] and set to [Off] or [Minimum].
17
ENGLISH
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
Television system Program coverage (Band) External antenna impedance
Broadcasting Specifications ATSC, NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135 75
Operating Temperature Operating Humidity Storage Temperature Storage Humidity
Environment condition 0 °C to 40 °C (32 °F to 104 °F) Less than 80 % -20 °C to 60 °C (-4 °F to 140 °F) Less than 85 %
18
ENGLISH
HDMI (PC) supported mode
· Use HDMI IN 1 for PC mode. (Depending upon model)
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
640 x 350
31.46
70.09
720 x 400
31.46
70.08
640 x 480
31.46
59.94
800 x 600
37.87
60.31
1024 x 768
48.36
60.00
1360 x 768
47.71
60.01
1152 x 864
54.34
60.05
1280 x 1024
63.98
60.02
1920 x 1080
67.50 134.86 135.00
60.00 119.88 120.00
2560 x 1440
88.78 182.99
59.95 119.99
3840 x 2160
53.95 54.00 56.25 61.43 67.50 112.50 134.86 135.00
23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00
4096 x 2160
53.95 54.00 56.25 61.43 67.50 112.50 134.86 135.00
23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00
HDMI (DTV) supported mode
Resolution 640 x 480p 720 x 480p 720 x 576p 1280 x 720p 1920 x 1080i
1920 x 1080p
3840 x 2160p
4096 x 2160p
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
31.46
59.94
31.50
60.00
31.47
59.94
31.50
60.00
31.25
50.00
44.96
59.94
45.00
60.00
37.50
50.00
28.12
50.00
33.72
59.94
33.75
60.00
26.97
23.97
27.00
24.00
33.71
29.97
33.75
30.00
56.25
50.00
67.43
59.94
67.50
60.00
112.50
100.00
134.86
119.88
135.00
120.00
53.95
23.98
54.00
24.00
56.25
25.00
61.43
29.97
67.50
30.00
112.5
50.00
134.86
59.94
135.00
60.00
53.95
23.98
54.00
24.00
56.25
25.00
61.43
29.97
67.50
30.00
112.50
50.00
134.86
59.94
135.00
60.00
19
ENGLISH
Composite, AV supported mode
Resolution 720 x 480i 720 x 480p
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
15.73
59.94
15.75
60.00
31.47
59.94
31.50
60.00
Supported Photo Formats
File Format Resolution
Format
.jpeg .jpg .jpe
Minimum: 64 (W) x 64 (H)
Maximum:
JPEG
– Normal Type: 15360 (W) x 8640 (H)
– Progressive Type: 1920 (W) x 1440 (H)
Minimum: 64 (W) x 64 (H)
.png
PNG Maximum: 5760 (W) x 5760 (H)
.bmp
BMP Minimum: 64 (W) x 64 (H) Maximum: 1920 (W) x 1080 (H)
Supported Audio Formats
File Format .mp3 .wav .ogg .wma .flac
Info
(Bit rate) 32 Kbps – 320 Kbps (Sample freq.) 16 kHz – 48 kHz (Support) MPEG1,
MPEG2 (channels) mono, stereo
(Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) PCM (channels) mono, stereo
(Bit rate) 64 Kbps – 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) Vorbis
(channels) mono, stereo
(Bit rate) 128 Kbps ~ 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz (Support) WMA
(channels) up to 6 ch
(Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) FLAC (channels) mono,
stereo
20
ENGLISH
Supported Video Formats
File Format
.asf .wmv
.avi
.mp4 .m4v .mov .3gp .3g2
.mkv
.ts .trp .tp .mts .mpg .mpeg .dat
.vob
.rm .rmvb
Video
Audio
Video
Audio Video Audio Video Audio Video
Audio
Video
Audio
Video Audio Video Audio Video Audio
Codec
VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles
WMA Standard (except for WMA v1/ WMA Speech)
Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS
H.264/AVC, MPEG-4, HEVC
Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4
H.264/AVC, MPEG-4
AAC, AMR-NB, AMR-WB
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC
Dolby Digital, Dolby Digital Plus, AAC, PCM, DTS, MPEG-1 Layer I, II, MPEG-1
Layer III (MP3)
H.264/AVC, MPEG-2, HEVC
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC, PCM, Dolby AC-4
MPEG-1, MPEG-2
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
MPEG-1, MPEG-2
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
RV30, RV40
Realaudio6 (cook), AAC LC, HE-AAC
· .rm, .rmvb: Only available in certain countries
Cautions for Video Playback
· ULTRA HD Video: 3840 x 2160, 4096 x 2160 · Some HEVC encoded ULTRA HD videos
other than
the content officially provided by LG Electronics may not be played. · Some
codecs can be supported after a software upgrade.
File Format
.mkv .mp4
.ts
Video Audio
Codec
H.264/AVC, HEVC Dolby Digital, Dolby Digital Plus, AAC
Supported External Subtitles
Subtitle
Format
External Subtitle
.smi, .srt, .sub (MicroDVD, SubViewer 1.0/2.0), .ass, .ssa, .txt (TMPlayer), .psb (PowerDivX), .dcs (DLP Cinema)
Embedded Subtitle
Matroska(mkv): Sub Station Alpha(SSA), Advanced Sub Station Alpha(ASS), SRT
MP4: Timed Text
21
ENGLISH
KEY CODES
- This feature is not available for all models.
Code (Hexa)
Function
Note
Code (Hexa)
00
/
R/C Button 45
01
/
R/C Button 4C
02
R/C Button 4D
03
R/C Button 52
06
R/C Button 5B
07
R/C Button 61
08
(Power)
R/C Button 63
09
(Mute)
R/C Button 71
0B
(Input)
R/C Button 72
Function
(Dash) /
(Blue) (Yellow) (Green) (Red)
Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button R/C Button
0E
R/C Button 79
R/C Button
0F
10 – 19 Number Key 0 – 9
1A
1E
28
39
40
41
43
(Settings)
R/C Button 7C R/C Button 8E R/C Button 8F R/C Button 91 R/C Button AA R/C Button B0 R/C Button B1 R/C Button BA R/C Button —
(Home) /
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
44
R/C Button
· Key code 4C (0 x 4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)
22
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
- Image shown may differ from your TV. Cable is not provided. The connection interface may differ from your TV.
RS-232C Setup
· Connect the USB to Serial converter/RS-232C input jack to an external
control device (such as a computer or an A/V control system) to control the
product’s functions externally.
· Connect the serial port of the control device to the RS-232C jack on the
product back panel.
NOTE · The type of control port on the TV can be different
between model series.
USB to Serial converter with USB Cable
USB Type
USB IN
(PC)
(TV)
· LG TV supports PL2303 chip-based (Vendor ID: 0 x 0557, Product ID: 0 x 2008)
USB to serial converter which is not made nor provided by LG.
· It can be purchased from computer stores that carry accessories for IT
support professionals.
23
ENGLISH
RS-232C with RS-232C Cable
DE9 (D-Sub 9pin) Type
(PC)
RS-232C IN
(CONTROL & SERVICE)
(TV)
· You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to
RS-232C cable required for the connection between the PC and the TV, which is
specified in the manual.
· The connection interface may differ from your TV.
Connector type: D-Sub 9-pin male
1
5
6
9
RS-232C (Serial port)
24
ENGLISH
RS-232C configurations
7-Wire Configurations (Standard RS-232C cable)
PC
RXD
2
TXD
3
GND 5
DTR
4
DSR
6
RTS
7
CTS
8
D-Sub 9
TV 3 2 5 6 4 8 7
D-Sub 9
3-Wire Configurations (Not standard)
PC
TXD
RXD 2
RXD
TXD 3
GND
GND 5
DSR
DTR
4
DTR
DSR
6
CTS
RTS
7
RTS
CTS
8
D-Sub 9
TV
3
TXD
2
RXD
5 GND
6
DSR
4
DTR
8
CTS
7
RTS
D-Sub 9
Set ID
For Set ID number, see “Real data mapping (Hexadecimal: Decimal)”. 1 Press
(Settings) ( ) to access the main menus. 2 Press the Navigation buttons to
scroll to ([General] [Set ID]) and press . 3 Scroll left or right to select a
[Set ID] number. The adjustment range is 1-99.
25
ENGLISH
Communication Parameters
· Baud rate: 9600 bps (UART) · Data length: 8 bits · Parity: None
· Stop bit: 1 bit · Communication code: ASCII code · Use a crossed (reverse) cable.
Command reference list
- (Depending upon model)
1 Power 2 [Aspect Ratio] 3 Screen Mute 4 Volume Mute 5 Volume Control 6 [Contrast] 7 [Brightness] 8 [Color] 9 [Tint] 10 [Sharpness] 11 OSD Select 12 Remote Control Lock Mode 13 Treble 14 Bass 15 [Balance] 16 [Color Temperature] 17 [Equalizer] 18 [Energy Saving] 19 Tune Command 20 [Channel] Skip/Add 21 Key 22 Control [Backlight] 23 Input select 24 Auto Configure
COMMAND1 k k k k k k k k k k k k k k k x j j m m m m x j
COMMAND2 a c d e f g h i j k l m r s t u v q a b c g b u
DATA (Hexadecimal) 00 to 01 (page 28) (page 28) 00 to 01 00 to 64 00 to 64 00 to 64 00 to 64 00 to 64 00 to 32 00 to 01 00 to 01 00 to 64 00 to 64 00 to 64 00 to 64 (page 31) 00 to 05 (page 31) 00 to 01 Key Codes 00 to 64 (page 35) (page 35)
· During playing media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS232C cable, TV can communicate “ka command” in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.
26
ENGLISH
TRANSMISSION / RECEIVING PROTOCOL
- (Depending upon Model)
Transmission
(Command1)(Command2)( )([Set ID])( )(Data)(Cr)
(Command 1): First command to control the TV. (j, k, m or x) (Command 2):
Second command to control the TV. ([Set ID]): You can adjust the set ID to
choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
When selecting Set ID 0′, every connected set is controlled. Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/receiving protocol. (Data): To transmit command data (hexadecimal). TransmitFF’ data to read status of command. (Cr): Carriage
Return – ASCII code 0 x 0D’ ( ): Space ASCII code0 x 20′
OK Acknowledgement
(Command2)( )([Set ID])( )(OK)(Data)(x) * The set transmits ACK
(acknowledgement) based on this format when receiving normal data. At this
time, if the
data is data read mode, it indicates present status data. If the data is data
write mode, it returns the data of the PC computer.
Error Acknowledgement (Command2)( )([Set ID])( )(NG)(Data)(x) * The set
transmits ACK (acknowledgement) based on this format when receiving abnormal
data from non-viable
functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal: Decimal)
- When you enter the (Data) in hexadecimal, refer to following conversion table. * Channel Tune (ma) Command uses two-byte hexadecimal value(Data) to select channel number.
00: Step 0 01: Step 1 ([Set ID] 1) … 0A: Step 10 ([Set ID] 10) … 0F: Step 15 ([Set ID] 15) 10: Step 16 ([Set ID] 16) …
32: Step 50 ([Set ID] 50) 33: Step 51 ([Set ID] 51) … 63: Step 99 ([Set ID] 99) … C7: Step 199 C8: Step 200 …
FE: Step 254 FF: Step 255 … 01 00: Step 256 … 27 0E: Step 9998 27 0F: Step 9999 …
27
ENGLISH
1 Power (Command: k a) To control power on or off of the set. Transmission
(k)(a)( )([Set ID])( )(Data)(Cr)
Data 00: [Off] Data 01: [On] Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
To show TV is power on or Off Transmission
(k)(a)( )([Set ID])( )(FF)(Cr)
Ack
(a)( )([Set ID])( )(OK/NG)(Data)(x)
- Similarly, if other functions transmit `FF’ data based on this format, Acknowledgement feedback presents status about each function.
- OK Ack., Error Ack. and other message may display on the screen when TV is power on.
2 [Aspect Ratio] (Command: k c) (Main Picture Size) To adjust the screen format. (Main picture format)
You can also adjust the screen format using the picture settings. Transmission
(k)(c)( )([Set ID])( )(Data)(Cr)
Data 01: [4:3] (Normal screen – Just Scan Off) Data 02: [16:9] (Wide screen – Just Scan Off) Data 06: [Original] (Just Scan Off) Data 09: [Just Scan]
Ack
(c)( )([Set ID])( )(OK/NG)(Data)(x)
- Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
- In DTV/HDMI/Component mode (high-definition), Just Scan is available.
- Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.
3 Screen Mute (Command: k d) To select screen mute on/off. Transmission
(k)(d)( )([Set ID])( )(Data)(Cr)
Data 00: Screen mute off (Picture on) / Video mute off Data 01: Screen mute on (Picture off) Data 10: Video mute on Ack
(d)( )([Set ID])( )(OK/NG)(Data)(x) - In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
4 Volume Mute (Command: k e) To control volume mute on/off. You can also adjust
mute using the mute button on remote control. Transmission
(k)(e)( )([Set ID])( )(Data)(Cr)
Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) Ack
(e)( )([Set ID])( )(OK/NG)(Data)(x)
28
ENGLISH
5 Volume Control (Command: k f ) To adjust volume. You can also adjust volume
with
the volume buttons on remote control. Transmission (k)(f)( )([Set ID])(
)(Data)(Cr) Data Min: 00 to Max: 64 Ack (f)( )([Set ID])( )(OK/NG)(Data)(x)
6 [Contrast] (Command: k g) To adjust screen contrast. You can also adjust
contrast in the picture settings. Transmission (k)(g)( )([Set ID])(
)(Data)(Cr) Data Min: 00 to Max: 64 Ack (g)( )([Set ID])( )(OK/NG)(Data)(x)
7 [Brightness] (Command: k h) To adjust screen brightness. You can also adjust
brightness in the picture settings. Transmission (k)(h)( )([Set ID])(
)(Data)(Cr) Data Min: 00 to Max: 64 Ack (h)( )([Set ID])( )(OK/NG)(Data)(x)
8 [Color] (Command: k i) To adjust the screen color. You can also adjust color
in the picture settings. Transmission (k)(i)( )([Set ID])( )(Data)(Cr) Data
Min: 00 to Max: 64 Ack (i)( )([Set ID])( )(OK/NG)(Data)(x)
9 [Tint] (Command: k j) To adjust the screen tint. You can also adjust color
in the picture settings. Transmission (k)(j)( )([Set ID])( )(Data)(Cr) Data
Red: 00 to Green: 64 Ack (j)( )([Set ID])( )(OK/NG)(Data)(x)
10 [Sharpness] (Command: k k) To adjust the screen sharpness. You can also
adjust
sharpness in the picture settings. Transmission (k)(k)( )([Set ID])(
)(Data)(Cr) Data Min: 00 to Max: 32 Ack (k)( )([Set ID])( )(OK/NG)(Data)(x)
11 OSD Select (Command: k l) To select OSD (On Screen Display) on/off when
controlling remotely. Transmission (k)(l)( )([Set ID])( )(Data)(Cr) Data 00:
[Off] Data 01: [On] Ack (l)( )([Set ID])( )(OK/NG)(Data)(x)
29
ENGLISH
12 Remote Control Lock Mode (Command: k m) To lock the front panel controls on
the monitor and
remote control. Transmission
(k)(m)( )([Set ID])( )(Data)(Cr)
Data 00: [Off] Data 01: [On] Ack
(m)( )([Set ID])( )(OK/NG)(Data)(x)
- If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.
- In the standby mode (DC off by off timer or
ka’,mc’ command), and if key operation is on, TV will not turn on by power on key of IR & Local Key.
13 Treble (Command: k r) (Depending upon model) To adjust treble. You can also adjust Treble in the
audio settings. Transmission
(k)(r)( )([Set ID])( )(Data)(Cr)
Data Min: 00 to Max: 64 Ack
(r)( )([Set ID])( )(OK/NG)(Data)(x)
14 Bass (Command: k s) (Depending upon model) To adjust bass. You can also
adjust Bass in the
audio settings. Transmission (k)(s)( )([Set ID])( )(Data)(Cr) Data Min: 00 to
Max: 64 Ack (s)( )([Set ID])( )(OK/NG)(Data)(x)
15 [Balance] (Command: k t) To adjust balance. You can also adjust balance in
the audio settings. Transmission (k)(t)( )([Set ID])( )(Data)(Cr) Data Min: 00
to Max: 64 Ack (t)( )([Set ID])( )(OK/NG)(Data)(x)
16 [Color Temperature] (Command: x u) To adjust color temperature. You can
also adjust
color temperature in the picture settings. Transmission (x)(u)( )([Set ID])(
)(Data)(Cr) Data Min: 00 to Max: 64 Ack (u)( )([Set ID])( )(OK/NG)(Data)(x)
30
ENGLISH
17 [Equalizer] (Command: j v) Adjust EQ of the set. Transmission
(j)(v)( )([Set ID])( )(Data)(Cr)
MSB
LSB
00000000
Frequency
Data
7 6 5 Frequency 4 3 2 1 0
Step
0 0 0 1st Band 0 0 0 0 0 0(decimal)
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
0 1 0 3rd Band … … … … …
…
0 1 1 4th Band 1 0 0 1 1 19(decimal)
1 0 0 5th Band 1 0 1 0 0 20(decimal)
Ack
(v)( )([Set ID])( )(OK/NG)(Data)(x)
- It depends on model, and can adjust when sound mode is EQ adjustable value.
18 [Energy Saving] (Command: j q) (Depending upon model) To reduce the power consumption of the TV. You
can also adjust energy saving in picture settings. Transmission
(j)(q)( )([Set ID])( )(Data)(Cr)
Data 00: [Off] Data 01: Minimum Data 02: Medium Data 03: Maximum Data 04: Auto Data 05: Screen off Ack
(q)( )([Set ID])( )(OK/NG)(Data)(x)
19 Tune Command (Command: m a) This command may work differently Depending
upon model and signal. For Europe, Mid-East, Colombia, Asia except South
Korea and Japan Model Select channel to following physical number.
Transmission
(m)(a)( )([Set ID])( )(Data 00)( )(Data 01)
( )(Data 02)(Cr) · Analog Antenna/Cable
(Data 00)(Data 01) Channel Data Data 00: High byte channel data Data 01: Low
byte channel data
– 00 00 ~ 00 C7 (Decimal: 0 ~ 199) Data 02: Input Source (Analog)
– 00: Antenna TV (ATV) – 80: Cable TV (CATV)
· Digital Antenna/Cable/Satellite (Data 00)(Data 01): Channel Data Data 00:
High byte channel data Data 01: Low byte channel data
– 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02: Input Source (Digital)
– 10: Antenna TV (DTV) – 20: Antenna Radio (Radio) – 40: Satellite TV (SDTV) –
50: Satellite Radio (S-Radio) – 90: Cable TV (CADTV) – a0: Cable Radio (CA-
Radio)
31
ENGLISH
· Tune Command Examples: 1 Tune to the Analog antenna (PAL) Channel 10.
[Set ID] = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog
Antenna TV = 00 Result = ma 00 00 0a 00 2 Tune to the digital antenna (DVB-T)
Channel 01. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data
02 = Digital Antenna TV = 10 Result = ma 00 00 01 10 3 Tune to the satellite
(DVB-S) Channel 1000. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 1000
= 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40
Ack
(a)( )([Set ID])( )(OK)(Data 00)(Data 01)
(Data 02)(x)(a)( )([Set ID])( )(NG)(Data 00)(x)
- For South Korea, North/Latin America except Colombia Model
To tune channel to following physical/major/minor number.
Transmission
(m)(a)( )(0)( )(Data 00)( )(Data 01)( )
(Data 02)( )(Data 03)( )(Data 04)( )(Data 05)(Cr)
– Digital channels have a Physical, Major, and Minor channel number. The
Physical number is the actual digital channel number, the Major is the number
that the channel should be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel from the Major / Minor number,
the Physical number is not required when sending a command in Digital.
32
ENGLISH
· Analog Antenna/Cable Data 00 : Physical Channel Number
– Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) – Cable (CATV) : 01, 0E~7D (Decimal
: 1, 14~125) (Data 01 ~ 04): Major/Minor Channel Number Data 01 & 02: xx
(Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog) – 00
: Antenna TV (ATV) – 01 : Cable TV (CATV)
· Digital Antenna/Cable Data 00 : xx (Don’t care) (Data 01)(Data 02): Major
Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel
Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999) (Data 03)(Data 04): Minor Channel Number
Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 :
Input Source (Digital)
– 02 : Antenna TV (DTV) Use Physical Channel Number – 06 : Cable TV (CADTV)
Use Physical Channel Number – 22 : Antenna TV (DTV) Don’t Use Physical
Channel Number – 26 : Cable TV (CADTV) – Don’t Use Physical Channel Number –
46 : Cable TV (CADTV) Use Major Channel Number Only (One Part Channel)
- Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).
· Tune Command Examples: 1 Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major =
00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total =
ma 00 23 00 00 00 00 01 2 Tune to the digital antenna (ATSC) channel 30-3. Set
ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 =
00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack (a)( )([Set ID])( )(OK)(Data 00)(Data 01)(Data 02)
(Data 03)(Data 04)(Data 05)(x)(a)( )([Set ID])( )
(NG)(Data 00)(x)
- For Japan Model To tune channel to following physical/major/minor
number. Transmission (m)(a)( )(0)( )(Data 00)( )(Data 01)( )(Data 02)
( )(Data 03)( )(Data 04)( )(Data 05)(Cr)
33
ENGLISH
· Digital Antenna/Satellite Data 00: xx (Don’t care) (Data 01)(Data 02): Major
Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999) (Data 03)(Data 04): Minor/Branch Channel
Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low
byte Channel Data Data 05: Input Source (Digital/Satellite for Japan)
– 02: Antenna TV (DTV) – 07: BS (Broadcasting Satellite) – 08: CS1
(Communication Satellite 1) – 09: CS2 (Communication Satellite 2)
· Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1.
[Set ID] = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is
17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna
TV = 02 Total = ma 00 00 00 11 00 01 02 2 Tune to the BS (ISDB-BS) channel 30.
[Set ID] = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is
30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07 * This feature is varied based on the model.
Ack
(a)( )([Set ID])( )(OK)(Data 00)(Data 01)
(Data 02)(Data 03)(Data 04)(Data 05)
(x)(a)( )([Set ID])( )(NG)(Data 00)(x)
20 [Channel] Skip/Add (Command: m b) To skip current channel for next time. Transmission (m)(b)( )([Set ID])( )(Data)(Cr) Data 00: Del(ATSC,ISDB)/Skip(DVB) Data 01: Add Ack (b)( )([Set ID])( )(OK/NG)(Data)(x)
- Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21 Key (Command: m c) To send IR remote key code. Transmission (m)(c)( )([Set ID])( )(Data)(Cr) Data: Key codes – page 22 Ack (c)( )([Set ID])( )(OK/NG)(Data)(x)
22 Control [Backlight] (Command: m g) To control the backlight. Transmission (m)(g)( )([Set ID])( )(Data)(Cr) Data Min: 00 to Max: 64 Ack (g)( )([Set ID])( )(OK/NG)(Data)(x)
34
ENGLISH
23 Input select (Command: x b) (Main Picture Input) To select input source for
main picture. Transmission (x)(b)( )([Set ID])( )(Data)(Cr) Data 00: DTV Data
01: CADTV Data 02: Satellite DTV ISDB-BS (Japan) Data 03: ISDB-CS1 (Japan)
Data 04: ISDB-CS2 (Japan) Data 10: ATV Data 11: CATV Data 20: AV or AV1 Data
21: AV2 Data 40: Component1 Data 41: Component2 Data 60: RGB Data 90: HDMI1
Data 91: HDMI2 Data 92: HDMI3 Data 93: HDMI4 Ack (b)( )([Set ID])(
)(OK/NG)(Data)(x) * This function depends on model and signal. 24 Auto
Configure (Command: j u) (Depending upon model) To adjust picture position and
minimize image
shaking automatically. It works only in RGB (PC) mode. Transmission (j)(u)(
)([Set ID])( )(Data)(Cr) Data 01: To set Ack (u)( )([Set ID])(
)(OK/NG)(Data)(x)
35
ENGLISH
IR OUT Using Guide
Suitable / Not Recommend remote-controller data format
Item Suitable Data Format Not Recommend Data Format
Data format code
Note
NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format
Single: Enable Repeat: Enable
Single: Enable Repeat: Disable Single: Disable Repeat: Disable
IR Receiver specifications
Carrier frequency Peak Wavelength Minimum burst length Minimum gap time is
required of Data word length Minimum gap time in the data stream is needed of
37.9 KHz 940 nm Min. 300 us Min. 350 us Max. 100 ms Min. 50 ms
Parameter
High Level Out Pulse Width Low Level Out Pulse Width
Symbol
Twh Twl
Conditions
Burst Wave = 600 Period = 1.2
Min Typ Max Unit
400 – 800 400 – 800
If not use the remote-controller with data formats recommended, IR output
signals will be suppressed
automatically by IR receiver. In this case, LG does not guarantee IR working
function. To make sure of this
matter, here are two methods as below. · Use the remote-controller with
suitable data formats. · Use the IR dongle receiver of the set-top box.
36
ENGLISH
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all referred
license terms, warranty disclaimers and copyright notices are available for
download. LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to anyone in receipt of
this information.
Updating Firmware
(Depending upon model) You can update the firmware for the product by
downloading the latest firmware. 1 Download the latest firmware at
partner.lge.com.
(Signing up for a membership and log-in required) 2 Create a folder named
“LG_DTV” or “lg_dtv” on a
USB memory device. 3 Move the downloaded file to the folder that you
have created on the USB memory device. 4 Connect the USB memory device to the
USB port
on your TV. 5 When a pop-up window appears, start the update
by following the instructions.
Licenses
Supported licenses may differ by model. For more information about licenses,
visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby
Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby
Laboratories.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0
Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered
trademarks or trademarks of DTS, Inc. in the United States and/ or other
countries. © DTS, Inc. All Rights Reserved.
Software Download Information
· SuperSign Software & Manual – Visit the LG Electronics website
(http://partner.lge. com) and download the latest software for your model.
(Depending upon model)
37
ENGLISH
Regulatory
FCC Notice
(For USA) This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment
and the receiver. – Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected. – Consult the dealer
or an experienced radio/TV technician for help. This device complies with part
15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired
operation. Any changes or modifications in construction of this device which
are not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Radio Frequency Interference Requirements (for UNII devices)
(For USA) High power radars are allocated as primary users of the 5.25 to 5.35
GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference
with and/ or damage this device. This device cannot be colocated with any
other transmitter.
FCC RF Radiation Exposure Statement
(For USA) [For having wireless function (WLAN, Bluetooth,…)] This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. This equipment should be
installed and operated with minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific operating instructions
for satisfying RF exposure compliance.
38
ENGLISH
Industry Canada Statement
(For Canada) [For having wireless function (WLAN, Bluetooth,…)] This device
contains licence-exempt transmitter(s)/ receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference. (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
(For Canada) [For having wireless function (WLAN, Bluetooth,…)] This equipment
complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance 20 cm (7.8 inches) between the antenna & your body. NOTE: THE
MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
RSS-247 Requirement
(For Canada) [For product having the wireless function using 5 GHz frequency
bands] (1) The device for operation in the band 51505250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems; (2) For devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the
e.i.r.p. limit; (3) For devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band 5725-5850 MHz shall be such
that the equipment still complies with the e.i.r.p. limits as appropriate; and
(4) [For devices operating in the band 5250-5350 MHz having an e.i.r.p.
greater than 200 mW] Antenna type(s), antenna models(s), and worst-case tilt
angle(s) necessary to remain compliant with the e.i.r.p. elevation mask
requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly
indicated.
Users should also be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and
that these radars could cause interference and/or damage to LE-LAN devices.
39
ENGLISH
NOTE TO CABLE/TV INSTALLER
(For USA and Canada) This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National Electric Code
(U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of the cable entry as
practical.
WARNING!
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as: · Using
cabinets or stands recommended by the
manufacturer of the television set. · Only using furniture that can safely
support the
television set. · Ensuring the television set is not overhanging the
edge of the supporting furniture. · Not placing the television set on tall
furniture
(for example, cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support. · Not placing the television set on
cloth or other materials that may be located between the television set and
supporting furniture. · Educating children about the dangers of climbing on
furniture to reach the television set or its controls. If your existing
television set is being retained and relocated, the same considerations as
above should be applied.
Symbols
Refers to alternating current (AC). Refers to direct current (DC). Refers to
class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
40
ENGLISH
41
42
ENGLISH
ENGLISH
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER TECHNOLOGY INDUSTRY CARES
Manufacturers, retailers and the rest of the consumer technology industry are
committed to making products safe and enjoyable. As you enjoy your television,
please note that all televisions new and old- must be supported on proper
stands or installed according to the manufacturer’s recommendations.
Televisions that are inappropriately situated on dressers, bookcases, shelves,
desks, speakers, chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
· NEVER allow children to climb on or play on the television or the furniture
on which the television is placed. · NEVER place the television on furniture
that can easily be used as steps, such as a chest of drawers. · ALWAYS follow
the manufacturer’s recommendations for the safe installation of your
television. · ALWAYS read and follow all instructions for proper use of your
television. · ALWAYS install the television where it cannot be pushed, pulled
over or knocked down. · ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
· ALWAYS contact your retailer about professional installation if you have any
doubts about your ability to safely mount your television. · ALWAYS use a
mount that has been recommended by the television manufacturer and has a
safety certification by a Nationally Recognized Testing Laboratory (NRTL). ·
ALWAYS follow all instructions supplied by the television and mount
manufacturers. · ALWAYS make sure that the wall or ceiling where you are
mounting the television is appropriate. Use proper anchoring systems for
different wall or ceiling types (e.g. wood, concrete, metal, etc.). If you are
unsure, contact a professional installer. · Televisions can be heavy. A
minimum of two people is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
· REMEMBER Special care should be made in the placement of older CRT/flat-
panel televisions. Many new television buyers move their older CRT/flat-panel
televisions into a secondary room after the purchase of a flat-panel
television. · NEVER place your older CRT/flat-panel television on a dresser
where children may be tempted to use the drawers to climb. · ALWAYS place your
older CRT/flat-panel television on furniture that is sturdy and appropriate
for its size and weight. · ALWAYS make sure your older CRT/flat-panel
television does not hang over the edge of your furniture.
CTA.tech
43
Supplier’s Declaration of Conformity
Trade Name
LG
Responsible Party LG Electronics USA, Inc.
Address
111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.
MODEL SERIAL NO.
LG Customer Information Center For inquires or comments, visit
www.lg.com or call;
1-888-865-3026 USA, Commercial User
1-855-286-2456 CANADA
References
- LG B2B Partner Portal
- Patents - DTS
- Computer Products & Accessories: Locks & Docks | Kensington
- Consumer Electronics, Home & Kitchen Appliances | LG Australia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>