HKBN RO1S Captain American Smart UV-C Vacuum Robot User Guide

HKBN RO1S Captain American Smart UV-C Vacuum Robot

Product Information

Product Usage Instructions

Download HKBN Smart App

Search and download the HKBN Smart App from the Apple App Store or Google Play Store. Alternatively, you can scan the QR code provided.

Add Device

1. You must first connect your phone to a 2.4GHz Wi-Fi network when adding device.
2. Tap “Devices” on the bottom menu.
3. Tap “Add Device” button OR “+” icon at top right corner if you already have paired device.
4. Tap “Disney/MARVEL Vacuum Robot” from left menu “Smart D”.(image 3)
5. Connect power, hold the ON/OFF button until the Wi-Fi indicator blinks. (image 4)
6. Select 2.4GHz Wi-Fi network and enter password* and then tap “Next”.
7. Please wait a moment while your device is in pairing process. *Important tips: Wi-Fi requirement
   • Currently all smart devices are compatible to 2.4GHz network only. Please make sure that your device and mobile are connected with 2.4GHz but not 5GHz Wi-Fi network.
   • If you have 5GHz network and by using the same network name (SSID) as the 2.4GHz network, please temporarily turn off the 5GHz network first before adding device.
8. After device added successfully, you can change the device name and assign it to the located room. (You can also change the device name and room location later in device setting page and room management page.) And you can find the related device in the “Device” page.

Control Device

Main Control Panel

• Switch On/Off
  You can press the “Switch” key to turn on/off your device remotely. It will show a “power off” notice on screen after you switched off the device.

• Mode Selection
  You can switch to different modes in HKBN Smart App according to different siutations:

  • “Smart”: The robot will switch between all modes automatically.
  • “Wall Follow”: The robot will follow walls to clean corners and edges
  • “Spiral”: The vacuum robot will circle around to clean open floor space (1.5m x 1.5m). It is designated to clean heavily soiled area
  • “Chargego”: The vacuum robot will return to the recharging dock
  • “Random”: The vacuum robot will travel to new areas. (Recommended for carpet)
  • “Manual mode”: Manual control the direction to clean a specific area (When turning left or right, the robot will drive the direction of rotation using a single wheel.)
  • “UVC”: UV-C light shines on floor surface that helps to Inhibit 99.9% of the most common surface bacteria*

• Attestation report of Hong Kong Certification Centre (HKCC): 99.99% of Klebsiella pneumoniae, Escherichia coli, Staphylococcus aureus and Salmonella typhimurium were sterilized in 2 seconds with the use of the UV lamp of Trio-cleanse (R01S).

• Manual Mode
  Manual control the direction to clean a specific area. (When turning left or right, the robot will drive the direction of rotation using a single wheel.)

• “Schedule”: automated ON/OFF function
  You can set automated schedule to turn ON/OFF your robot vacuum:

  • Tap “Schedule” ;
  • Tap “Add” ;
  • Select the time you need and then tap “Switch”;
  • Select “On” or “Off”;
  • Tap the button to enable or disable this schedule.

• Function Settings
  You can enable/disable different functions in “Setting” section:

Scene (Smart Action)

The integration of different smart devices is the beauty of smart home living which provides convenience and many possibilities of creating your preferred control settings. By setting SCENE, you can execute different smart devices at the same time by only one single tap. You can tailor make your unique scene such as movie time scene, welcome/back home scene, reading scene etc.
User Voice Command to Turn On/Off cleaning
Instructions below explain how to create a Scene:

1. In “Smart Action” under the page of “S cene”, tap “+”to add new Scene, and then tap “Add Action”
2. Select the related device and tap “Cleaning Switch”, and then select “On”.(If turn off the device then select “Off”)
3. Tap to enable “Show on Dashboard Widgets”, tap “Save” on the top right corner to complete

How to add Siri Command into Scene:

1. In the page of “Scene”, tap “Add to Siri ”
2. In Siri Shortcuts, select the scene you would like to add Voice command
3. Input the voice command you want and then tap “Add to Siri” to complete.

Device Information

The device provides information such as the current cleaning mode, cleaning route, battery status, cleaning time, cleaning area, pause cleaning, smart wall follow, and mode selection.

• Check for Firmware Upgrade
  Tap “Check for Firmware Upgrade”, you can see current firmware version and available upgrade version if any. Tap “Upgrade” to start firmware upgrade .

• Remove Device

  • In device settings page, tap “Remove Device”.
  • Tap “OK” to confirm and remove device from your account.

Product Specifications

• Model No.: RO1S
• Rated Voltage: 14.4V
• Power: 30W (Vacuum Robot)
• Rated Power / Output: 11.4W (Charging Base)
• Water Tank Volume: 100ml
• Suction Force: 800Pa / 1300Pa / 1800Pa
• Noise Level: 40-68dB
• Working Time: 110 mins
• Climbing Angle: 15°
• Obstacle Crossing: 20mm
• Effective Area: 120m²
• UV-C Radiation: 3500-4000Um/cm²
• Battery Type: 2600mAh Li-Ion Battery
• Wireless Wi-fi Frequency: 2.402GHz – 2.480GHz
• Wireless Wi-fi Distance: 10m
• Size: 350 X 350 X 80mm (Vacuum Robot)      : 160 X 143 X 80mm (Charging Base)
• Weight: 3.1Kg (Vacuum Robot)
• Cable Length: 1.8m

Product Maintenance and Warranty

For the enquiry of product maintenance and warranty, please contact the product distributor/ manufacturer below:
MOMAX Customer Service Centre

• Service Center: Unit A, 4/F, Cheung Lung Industrial Building, 10 Cheung Yee Street, Lai Chi Kok, Kowloon, Hong Kong
• Tel.: (852) 2402 3186
• E-mail: [email protected]
• Opening Hours: (Monday – Friday) 9:00a.m. to 6:00p.m., Closed on Saturday, Sunday and Public Holidays.

Should you have any query, please call our Customer Service Hotline at 128 100.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>