milwaukee M18 FHT45 Fuel Accu Hedge Trimmer Instructions
- June 12, 2024
- Milwaukee
Table of Contents
milwaukee M18 FHT45 Fuel Accu Hedge Trimmer Instructions
TECHNICAL DATA
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands warm, organization of work patterns.
⚠ WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference.
CORDLESS HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the blade. Do not remove cut material or
hold material to be cut when blades are moving. Blades continue to move after
the switch is turned off. A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
Carry the hedge trimmer by the handle with the blade stopped and fingers away
from all power switches. Proper carrying of the hedge trimmer will decrease
the risk of inadvertent starting and resultant personal injury from the
blades.
When transporting or storing the hedge trimmer, always fit the blade cover.
Proper handling of the hedge trimmer will decrease the risk of personal injury
from the blades.
Make sure all power switches are off when clearing jammed material or
servicing the unit. Unexpected actuation of the hedge trimmer while clearing
jammed material or servicing may result in serious personal injury.
Hold the hedge trimmer by insulated gripping surfaces only, because the blade
may contact hidden wiring. Blades contacting a “live” wire may make exposed
metal parts of the hedge trimmer “live” and could give the operator an
electric shock.
Keep all power cords and cables away from cutting area. Power cords or cables
may be hidden in hedges or bushes and can be accidentally cut by the blade.
Do not use the hedge trimmer in bad weather conditions, especially when there
is a risk of lightning. This decreases the risk of being struck by lightning.
ADDITIONAL SAFETY WARNINGS
Never allow children, persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge or people unfamiliar with
these instructions to use the machine, local regulations may restrict the age
of the operator.
Clear the work area before each use. Remove all objects, such as cords,
lights, wires, or strings which can be thrown or become entangled in the
cutting means.
Check the hedge for foreign objects, such as wire fences.
Never use the product near posts, fences, buildings, or other immovable
objects.
Beware of thrown objects; keep all bystanders, children, and pets at least 15
m away from work area.
Do not operate in poor lighting. The operator requires a clear view of the
work area to identify potential hazards.
Inspect the product before each use. Check for loose fasteners, etc. Make sure
all guards and handles are properly and securely attached. Replace any damaged
parts before use. Check for battery pack leaks.
Do not modify the product in any way.
Do not allow children or untrained individuals to use the product.
Wear full eye and hearing protection while operating the product. If working
in an area where there is a risk of falling objects, wear appropiate head
protection.
Secure long hair so it is above shoulder level to prevent entanglement in
moving parts.
Do not use the product when you are tired, ill, or under the influenceof
alcohol, drugs, or medication.
Keep firmfooting and balance. Do not overreach. Overreaching can result in
loss of balance.
Before starting the product, make sure the cutting blades will not come in
contact with anything.
While operating the hedge trimmer, always hold it firmly with both hands by
the two handles. Ensure that the operating position is safe and secure. The
manufacturer does not recommend the use of steps or ladders. If higher
trimming is required, use an extended-reach tool.
Blades are sharp. When handling the blade assembly, wear non-slip, heavy duty
protective gloves. Do not place your hand or fingers between blades or in any
position where they could get pinched or cut. Never touch the blade nor
service the product unless the battery pack is removed.
Do not force the product through heavy shrubbery. This can cause the blades to
bind and slow down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than 19 mm, or those
obviously too large to feed into the cutting blade.
Use a non-powered hand saw or pruning saw to trim large stems. Use of hearing
protection reduces the ability to hear warnings (shouts or alarms). The
operator must pay extra attention to what is going on in the working area.
⚠ WARNING! If the machine is dropped, suffers heavy impact or begins to
vibrate abnormally, immediately stop the machine and inspect for damage or
identify the cause of the vibration. Any damage should be properly repaired or
replaced by an MILWAUKEE service station.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by burning
them. Milwaukee Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only System M18 chargers for charging System M18 battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme
temperatures. In case of contact with battery acid wash it off immediately
with soap and water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in fluid
or allow a fluid to flow inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The cordless hedge trimmer is only intended for use outdoors. For safety
reasons the product must be adequately controlled by using two-handed
operation.
The product is designed for home or domestic use. It is intended to cut and
trim hedges, shrubs, and similar vegetation.
It should be used in dry, well-illuminated conditions.
It is not intended to cut grass, trees, or branches. It should not be used for
any other purpose than hedge trimming.
Do not use this product in any other way as stated for normal use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may arise in use and the operator should pay special attention to avoid the following:
- Injury caused by vibration Hold the product by designated handles and restrict working time and exposure.
- Exposure to noise can cause hearing injury. Wear ear protection and limit exposure.
- Injury due to flying debris Wear eye protection, heavy long trousers, gloves and substantial footwear at all times.
- Inhalation of toxic dusts.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after
used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery pack where the
temperature is below 27°C and away from moisture Store the battery packs in a
30% – 50% charged condition Every six months of storage, charge the pack as
normal.
Battery protection for Li-Ion batteries
In extremely high torque, binding, stalling and short circuit situations that
cause high current draw, the tool will vibrate for about 5 seconds, the fuel
gauge will flash, and then the tool will turn OFF. To reset, release the
trigger. Under extreme circumstances, the internal temperature of the battery
pack could raise too much. If this happens, the fuel gauge will flash until
the battery pack cooled down. After the lights go off, the work may continue.
Transport of Li-Ion batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that battery pack is secured against movement within packaging.
- Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
TRANSPORTATION AND STORAGE
Stop the machine, remove the battery, cover the blade with the blade cover and
allow the machine to cool before storing or transporting.
Clean all foreign materials from the machine. Store the machine in a cool,
dry, and well-ventilated place that is inaccessible to children. Keep away
from corrosive agents, such as garden chemicals and de-icing salts. Do not
store outdoors.
For transportation in vehicles, secure the machine against movement or falling
to prevent injury to persons or damage to the machine.
Always hold the hedge trimmer with both hands when operating.
Keep hands away from all cutting edges and moving parts. Fingers can be pulled
into cutting carriage and be cut or crushed.
To prevent serious injury, do not touch cutting blades.
MAINTENANCE
After each use, clean the body and handles of the product with a soft, dry
cloth.
After each use, clean the debris from the blades with a stiff brush, and then
carefully apply a rust preventative lubricant before refitting the blade
protector. The manufacturer recommends you to use a rust preventative and
lubricant spray to apply an even distribution and reduce the risk of personal
injury from contact with the blades. For information about suitable spray
product, please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
You may wish to lubricate the blades lightly before use if necessary using the
above method.
Keep all nuts, bolts and screws tight to be sure that the machine is in safe
working condition.
Examine the machine and replace worn or damaged parts for safety.
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/ service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
machine type printed as well as the six-digit No. on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
EC DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that the product
described under “Technical Data” fulfils all the relevant regulations and
directives listed below and that the following harmonized standards have been
used.
2011/65/EU (RoHS)
2014/30/EU
2006/42/EC
2000/14/EC
2005/88/EC
EN 62841-1:2015
EN 62841-4-2:2019
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 63000:2018
Measured sound power level: 91,6 dB (A)
Guaranteed sound power level: 93,0 dB(A).
Conformity assessment procedure according 2000/14/EC to
Annex V.
Winnenden, 2021-07-15
Alexander Krug
Managing Director
Authorized to compile the technical file
S.I. 2008/1597 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2001/1701 (as amended)
BS EN 62841-1:2015
BS EN 62841-4-2:2019
BS EN IEC 55014-1:2021
BS EN IEC 55014-2:2021
BS EN IEC 63000:2018
Measured sound power level: 91,6 dB (A)
Guaranteed sound power level: 93,0 dB(A)
Conformity assessment procedure according to S.I.2001/1701
Schedule 8
Winnenden, 2021-07-15 Alexander Krug
Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
Copyright 2021
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden
Germany
+49 (0) 7195-12-0
www.milwaukeetool.eu
Techtronic Industries (UK) Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>