thomann 537366 Combo 61 Sit Stand Instruction Manual

thomann 537366 Combo 61 Sit Stand

Product Information

• Product Name: Combo 61 Sit Stand
• Manufacturer: Zaor
• Assembly Manual: Included

Product Usage Instructions

1. Before starting the assembly process, ensure that you have all the necessary tools and components listed in the “PACKING LIST” section of the manual.

2. Read through the assembly instructions carefully and familiarize yourself with the different components and their names.

3. Follow the general technique provided by Zaor for putting together their desks:

   • Assemble the desk using the special kits provided.
     Note that the system bolt may have a little slack, which is normal.

4. To attach two pieces together using the system bolt: – Ensure that the hole in the bolt aligns with the opening in the other piece.

   • Insert a cone-shaped safety screw into each hole in the second piece.
   • Tighten the safety screws with a cross screwdriver without forcing.
   • This will securely attach the two parts together.

5. If you need to disassemble the slider (L) or (R), refer to the specific instructions provided in the manual.

6. Follow the step-by-step assembly process outlined in the manual:

   • Each step is numbered, and you should follow the instructions in sequential order.
   • Use the provided screws and tools specified for each step.

7. In Step 10, connect all cables to the adaptor and ensure they are securely connected.

8. If you don’t need the rack units, skip fixing the rack rails and use the pieces numbered 11 to close the holes.

9. Once you have completed all the steps, ensure that all screws are tightened properly to ensure stability and safety. 10. Enjoy using your newly assembled Combo 61 Sit Stand furniture from Zaor!
   Note: If you encounter any issues or have any doubts during the assembly process, you can contact Zaor for assistance or refer to their Youtube channel for assembly videos.

Combo 61 Sit Stand

Thanks for choosing a piece of furniture from Zaor. Before you can enjoy the use of it you need to build it. We tried to put all the explanations necessary for a safe build, when in doubt please get in touch or check out our Youtube channel where we are putting more and more assembly videos to help you with this important task. Enjoy!

General technique for putting together Zaor desks

The assembly of your desk uses special kits. Here’s how to use them 1

1. ) On the piece with the threaded insert(s) , put in the system bolt(s) and tighten making sure to align the hole in the system bolt at a 90º angle. Please note that the system bolt may have a little slack in this position, which is fine!
2. Ensure that the hole in the bolt aligns with the opening in the other piece to be able to put in the safety screw.
3. In each hole in the second piece, put in a cone shaped safety screw and tighten with a cross screw driver -without forcing.
   The 2 parts will now be safely attached.

How to disassemble the slider (L)

Left

How to disassemble the slider (R)

Right

STEP 4
Use screws Type F (Legs Box)

STEP 5

STEP 8
Use screws Type A
Use screws Type D

If you don’t need the rack units don’t fix the rack rails and use the pieces number 11 to close the holes

PACKING LIST

TOOLS:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>