QIBOX E5 5V Smart Watch Charging Station User Guide

June 12, 2024
QIBOX

QIBOX E5 5V Smart Watch Charging Station

Product Information

The product is a charging base for a watch that has the model name E5. The input required for the charging base is 5V/1A. The product comes with a user manual that provides important precautions and instructions to be followed while using the product. The product is manufactured in China.

Model:E5
Input: 5V/1A

Precautions

  1. Use the power adapter produced by the regular manufacturer or a reliable computer interface to connect this product.
  2. The watch should be accurately centered on the charging base, straighten the bands, and avoid other foreign objects such as bands that cause the watch to deviate from the charging position,  resulting in slow or no charging of the watch.
  3. The watch can be charged with a protective case, but some protective cases are not easy to dissipate heat, which will cause the watch to charge slowly. At this time, you need to remove the protective case and place it again for charging.
  4. When charging, make sure that the charging cable and the adapter are connected reliably to avoid slow or no charging during the charging process.
  5. Do not use the product in a humid, high temperature environment.
  6. When cleaning, it can be wiped with a damp cloth, do not use organic solvents such as detergents to avoid damage to the product.
  7. Do not disassemble this product, and do not place this product near a fire source.
  8. Children or pets should be kept away from this product.

Usage Instructions

  1. Connect the power adapter produced by the regular manufacturer or a reliable computer interface to the charging base.
  2. Place the watch accurately centered on the charging base and straighten the bands.
  3. Avoid other foreign objects such as bands that cause the watch to deviate from the charging position, resulting in slow or no charging of the watch.
  4. If using a protective case, ensure that it is easy to dissipate heat. Otherwise, remove the protective case and place it again for charging.
  5. Ensure that the charging cable and the adapter are connected reliably while charging to avoid slow or no charging during the charging process.
  6. Do not use the product in a humid, high temperature environment.
  7. Clean the product with a damp cloth. Do not use organic solvents such as detergents to avoid damage to the product.
  8. Do not disassemble this product, and do not place this product near a fire source.
  9. Keep children or pets away from this product.

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals