JBL 109TBUDSBK Tune Buds User Manual

: June 12, 2024
: JBL

JBL 109TBUDSBK Tune Buds

WHAT’S IN THE BOX

jbl-109tbudsbk-tune-buds-fig-1

APP

jbl-109tbudsbk-tune-buds-fig-2

how to wear

jbl-109tbudsbk-tune-buds-fig-3

First time use

power on & CONNECT

jbl-109tbudsbk-tune-buds-fig-5

DUAL CONNECT + SYNC

jbl-109tbudsbk-tune-buds-fig-6

MULTI-POINT CONNECTION

jbl-109tbudsbk-tune-buds-fig-7

CONTROLS

jbl-109tbudsbk-tune-buds-fig-9

Enable advance controls by connecting your JBL Tune BUDS to JBL Headphones App .
ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO Y OUR PREFERRED EARBUD (L/R).

VOICEAWARE

power off

FACTORY RESET

DO MORE WITH THE APP

Charging

led behaviors

TECH SPEC

Model: TUNE BUDS
Driver size : 10 mm/ 0.39” Dynamic Driver
Power supply: 5 V 1 A
Earbud: 5.4 g per pc (10.8 g combined)/ 0.012 lbs per pc (0.024 lbs combined)
Charging case: 44 g/ 0.097 lbs
Earbud battery type: Lithium-ion Battery (70 mAh/ 3.85 V)
Charging case battery type : Lithium-ion Battery (680 mAh/ 3.8 V)
Charging time: 2 hrs from empty Music playtime with BT on
and ANC off: Up to 12 hrs Music playtime with BT on
and ANC on: Up to 10 hrs
Talk time with ANC on: Up to 6 hrs
Talk time with ANC off: Up to 6.6 hrs
Frequency response: 20 Hz – 20 kHz
Impedance: 32 ohm
Sensitivity: 101 dB SPL@1 kHz
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV/Pa@1 kHz
Bluetooth version: 5.3
Bluetooth profile version: A2DP V1.3.2, AVRCP V1.6.2, HFP V1.8 Bluetooth transmitter
frequency range: 2.4 GHz – 2.4835 GHz Bluetooth transmitter
power: <11 dBm (EIRP) Bluetooth transmitter
modulation: GFSK, π/4-DQPSK, 8-DPSK
Maximum operation temperature: 45 °C

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

WARNING

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLTUNEBUDS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 1.067 W / kg. The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.