MINISO CM892W 1600 DPI Wireless Mouse Instructions
- June 12, 2024
- MINISO
Table of Contents
Ergonomic Wireless silent mouse
CM892W
1600 DPI & 2.4GHz
Instructions
CM892W 1600 DPI Wireless Mouse
Specifications: Wireless Mouse
Mouse： 106.22 x61.85×37.64mm
Receptor: 18.75×14.55×6.0 mm Wireless transmission
frequency: 2.402~2.480GHz
Working voltage: mouse 1.5V Service
life of button: 2000000 times Effective
using distance: 6-8m
Compatibility: Windows98/Me/2000/xp/Vista/7/8/10 ， Mac/LINUX
Product Features: Fashionable model，To operate by left or right hand，2.4G
Hz transmission，Nano receptor，Magnet-sucked button，The rubber scroll
wheel，1600DPI
Material: ABS plastic Aluminium scroll wheel Electric Elements
Usage: Uncover the top button and install 1 AA battery(not included)
according to the polarity shown on the mouse. Insert the receptor and use the
mouse after a few seconds following auto installation on the computer.
Cqution: When the mouse malunations:
- Check whether the battery is working as nommal.
- 1i the betteny is working nommally and the mouse is functioning, you may re-match code.
(How to match code:
A. re-plug and re-dial the receptor.
B. press on the left and night button sof the mouse by the right hand
whilein staing bettery.
C. The LED indicator’s Hlashing atthe bottom of the mouse indicates
successful code matching. And then release right and left buttons.)
storage: Tempereture: 0℃-40C. Humidity. 85%-9ORH FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
MADE IN CHINA
www.miniso.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>