Backyard 2101555 Beaumont 14 ft. x 12 ft. Light Brown All Cedar Wooden Pergola Instruction Manual

Backyard 2101555 Beaumont 14 ft. x 12 ft. Light Brown All Cedar Wooden

Pergola

BASIC SETUP DIMENSIONS & ASSEMBLY NOTES

It is critically important that you start with square and level footings, concrete pad or deck to attach your structure

• Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly
• Remember to double-check for underground utilities and overhead electrical lines

Post mounts are provided with your structure which allows you to permanently install your structure to a
pre-existing or new wood or concrete surface. See Anchor Instructions for further details and recommendations.

• The hardware to attach the post mounts to the structure is included.
• The hardware to mount the structure permanently to a concrete surface is included.
• The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased separately. You must ensure there is ample structural support under the deck before permanently attaching.

DIMENSION

ANCHORING LAYOUT

PARTS IDENTIFICATION

Wood Components (Not to Scale)

Hardware Components

Accessory Components (Not to Scale)

PRE-ASSEMBLY

STEP 1 – SORTING PARTS

It is critical for ease of assembly that you take the time to sort and organize the wood and hardware.

WOOD PARTS:

• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
• If there are multiple boards with the same stamped number, stack those pieces together.
• Stamps can be found on the flat surface of the boards or on the end of the boards.
• Allow yourself plenty of room – the wood pieces can take up a significant amount of space.

NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.

HARDWARE PARTS:

• We recommend that you have a separate table to organize the hardware.
• Hardware bags are printed with a seven-digit, alpha-numeric part number.
• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
• During assembly you only need to reference the last four digits of the number.

STEP 2 – TOOLS REQUIRED

STEP 3 – CHOOSE YOUR ASSEMBLY METHOD

There are several types of assembly instructions available to you.

1. Printed Assembly Manual included with your set
2. BILT APP – 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two methods)

STEP 4 – PERGOLA ASSEMBLY

STEP 5 – PERGOLA ASSEMBLY

STEP 6 – PERGOLA ASSEMBLY

STEP 7 – PERGOLA ASSEMBLY

STEP 8 – PERGOLA ASSEMBLY

STEP 9 – PERGOLA ASSEMBLY

STEP 10 – PERGOLA ASSEMBLY

STEP 11 – PERGOLA ASSEMBLY

STEP 12 – PERGOLA ASSEMBLY

STEP 13 – PERGOLA ASSEMBLY

STEP 14 – PERGOLA ASSEMBLY

STEP 15 – PERGOLA ASSEMBLY

STEP 16 – PERGOLA ASSEMBLY

STEP 17 – PERGOLA ASSEMBLY

STEP 18 – PERGOLA ASSEMBLY

ELECTRICAL ENCLOSURE

FOR ELECTRICAL ENCLOSURE INSTALLATION REFER TO THE ASSEMBLY INSTRUCTIONS THAT COME PACKAGED WITH THE ELECTRICAL ENCLOSURE KIT. INSTALL ON ANY POST THAT IS DESIRED. FOLLOW DIRECTIONS FOR PROPER INSTALLATION.

PowerPort

• Model # 9205413
• Wood Post Mounting Instructions

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC INSTRUCTIONS

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445

References

• Backyard Discovery - Outdoor Home Decor and Furniture

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>