Robert Stevenson Lighting EC1166C Kendrick 3 Light Matte Black and Brushed Gold Metal and Glass Vanity Light Instruction Manual
- June 12, 2024
- Robert Stevenson Lighting
Table of Contents
Robert Stevenson Lighting EC1166C Kendrick 3 Light Matte Black and
Brushed Gold Metal and Glass Vanity Light
Product Information
The EC1166C is a light fixture that includes a mounting bracket, fixture body, glass, socket collar, and wire connector. It requires a bulb with a maximum wattage of 100 watts. The fixture is designed to be connected to an outlet box and can be mounted on a flat surface.
Components List
| Item | Description | Quantity |
|---|---|---|
| A | Wire Connector | 3 |
| B | Mounting Bracket | 1 |
| C | Fixture Body | 1 |
| D | Glass | 3 |
| E | Socket Collar | 3 |
| F | Bulb (Not Included) | 3 |
Hardware List
| Item | Description | Quantity |
|---|---|---|
| a | Canopy Mounting Screws | 2 |
| b | Screws (Not Included) | 2 |
| c | Barrel Knobs | 2 |
Product Usage Instructions
Before installing the EC1166C light fixture, ensure that themain power is turned off to avoid the risk of electrical shock. Refer to the wattage caution label located near the socket for recommended maximum wattage and do not exceed the maximum wattage.
- Carefully unpack the fixture from the carton and lay all the fixture components on a clean and flat surface.
- Insert the Mounting Screws (a) into the Mounting Bracket (B) facing downward. Secure the Mounting Bracket (B) to each outlet box with appropriate sized screws (b) (not included). Note: The side of mounting plate marked GND must face out.
- Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the Wire Connector (A). Tuck wires neatly back into the outlet box.
- Adjust Mounting Bracket (B) and lock the Fixture Body (C) onto the screws with Barrel Knobs (c).
- Install Glass (D) onto the Fixture Body (C) and tighten the Glass (D) using the Socket Collar (E).
- Screw Bulb (not included) (F) into the lamp socket. Do not exceed the maximum wattage specified on the fixture wattage rating label. MAXIMUM 100 Watts.
Note: The above diagram illustrates the installation of your new light fixture. This is a representative drawing and may not match the style of your light fixture.
Components List
Item| Description| Quantity| Item| Description|
Quantity
---|---|---|---|---|---
A| Wire Connector| 3| D| Glass| 3
B| Mounting Bracket| 1| E| Socket Collar| 3
C| Fixture Body| 1| F| Bulb (Not Included)| 3
Hardware List
Item| Description| Quantity| Item| Description|
Quantity
---|---|---|---|---|---
a| Canopy Mounting Screws| 2| c| Barrel Knobs| 2
b| Screws (Not Included)| 2| | |
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR TO
INSTALLATION.
CAUTION
Refer to the wattage caution label located near the socket for recommended
maximum wattage. Do not exceed maximum wattage.
ASSEMBLY & INSTALLATION
-
Carefully unpack the fixture from the carton. Take the parts out of package and lay all the fixture components in a clean and flat surface.
-
Put the Mounting Screws (a) into the Mounting Bracket (B) facing downward. Secure the Mounting Bracket (B) to each the outlet box with appropriate sized screws (b) (not included).
Note: The side of mounting plate marked “GND” must face out. -
Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the Wire Connector (A). Tuck wires neatly back into the outlet box.
-
Adjust Mounting Bracket (B) and lock the Fixture Body (C) onto the screws with Barrel Knobs (c).
-
Install Glass (D) onto the Fixture Body (C) and tighten the Glass (D) using the Socket Collar (E).
-
Screw Bulb (not included) (F) into the lamp socket. Do not exceed the maximum wattage specified on the fixture wattage rating label. MAXIMUM 100 Watts.
Note: The above diagram illustrates the installation of your new light fixture. This is a representative drawing and may not match the style of your light fixture.