Robert Stevenson Lighting EC1185C Walsh 3 Light Matte Black and Brushed Nickel Metal Vanity Light Instruction Manual
- June 12, 2024
- Robert Stevenson Lighting
Table of Contents
Robert Stevenson Lighting EC1185C Walsh 3 Light Matte Black and Brushed
Nickel Metal Vanity Light
Product Information
- Product Name: EC1185C
- Type: Light Fixture
- Components: Wire Connector (A), Mounting Bracket (B), Fixture Body (C), Lamp Shade (D), Bulb (not included) (E)
- Hardware: Canopy Mounting Screws (a), Long Screws (not included), Barrel Knobs (c), Screws (d)
- Maximum Wattage: 60 Watts
Product Usage Instructions
WARNING: To avoid the risk of electrical shock, be sure to turn off the main power prior to installation.
CAUTION: Refer to the wattage caution label located near the socket for maximum rated wattage. Do not exceed maximum rated wattage listed.
- Turn off the main power before installation.
- Attach the Wire Connector (A) to the HOT (OR BLACK) WIRE from the fixture and the HOT WIRE from the power supply.
- Tuck wires neatly back into the outlet box.
- Adjust the Mounting Bracket (B) and install Fixture Body (C) onto the Canopy Mounting Screws (a). Tighten and secure in place with Barrel Knobs (c).
- Install Lamp Shade (D) onto the Fixture Body (C). Tighten the Lamp Shade (D) with Screws (d).
- Screw Bulb (not included) (E) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s wattage rating label.
Note: The above diagram illustrates the installation of your new light fixture. This is a representative drawing and may not match the style of your light fixture.
ASSEMBLY & INSTALLATION INSTRUCTIONS
Components List
Item| Description| Quantity| Item| Description|
Quantity
---|---|---|---|---|---
A| Wire Connector| 3| D| Lamp Shade| 3
B| Mounting Bracket| 1| E| Bulb (Not Included)| 3
C| Fixture Body| 1| | |
Hardware List
Item| Description| Quantity| Item| Description|
Quantity
---|---|---|---|---|---
a| Canopy Mounting Screws| 2| c| Barrel Knobs| 2
b| Long Screws (not included)| 2| d| Screws| 6
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR TO
INSTALLATION.
CAUTION
Refer to the wattage caution label located near the socket for maximum rated
wattage. Do not exceed maximum rated wattage listed.
ASSEMBLY & INSTALLATION
- Carefully unpack fixture from the carton. Take the parts out of the package and lay all the fixture components in a clean and flat surface.
- Attach Canopy Mounting Screws (a) to the Mounting Bracket (B) with screws facing outward. Install the Mounting Bracket to the outlet box with Long Screws (b) (not included). Note: The side of mounting plate marked “GND” must face out.
- Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the Wire Connector (A). Tuck wires neatly back into the outlet box.
- Adjust Mounting Bracket (B) and install Fixture Body (C) onto the Canopy Mounting Screws (a) then tighten and secure in place with Barrel Knobs (c).
- Install Lamp Shade (D) onto the Fixture Body (C). Tighten the Lamp Shade (D) with Screws (d).
- Screw Bulb (not included) (E) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s wattage rating label. MAXIMUM 60 Watts.
Note:
- The above diagram illustrates the installation of your new light fixture. This is a representative drawing and may not match the style of your light fixture.