tracer 4.5D FHD Vela Mirror Dash Cam Instruction Manual

4.5D FHD Vela Mirror Dash Cam
Instruction Manual
Model: Tracer 4.5D FHD Vela

4.5D FHD Vela Mirror Dash Cam

1| DC Power/ USB Interface. Connect with a car charger or DC(5V-12V) power to charge
---|---
2| AV-IN rear camera slot. Connect with external rear camera
3| TF Card Slot. Insert Micro SD Card or TF Card,4-32GB Class10 high speed
4| Reset Hole
5| Mode/Menu Key: while working short press to enter the Menu settings. Long press to switch the modes (recording, photo, playback)
6| UP Key. In the menu, use the UP key to scan and choose the menu options. In the playback mode, use the Up key to scan and choose video files to play
7| Power Key. Long press to turn on/off the device. Short press under working state, open/close the screen saver
8| Down Key. Under Recording Mode, a short press on Down Key the mute the video recording
9| OK, Key. While Recording Mode, a short press on OK Key to start/ stop recording. In the menu, use the OK key to confirm the settings

Safety instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not use this unit for anything other than its intended use.
• Keep the unit out of reach of children. This appliance is not a toy.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, or fire.

Installation guide

1. Turn off the car engine.
2. Insert the TF card into the recorder card slot. Please use a high-speed TF card (Class10 or higher), a capacity 8-32GBFix the recorder to the suction cup bracket on the glass of the car.
3. Insert the car charger into the car cigarette lighter.
4. Using enclosed mounting elements please put the mirror dash cam on the front mirror inside the car.
5. Adjust the lens position to ensure that the lens is level with the ground. Plug in the rear cam to the proper slot on the dash cam. For the automatic switch to the image from the rear camera, after using the reverse gear, please connect the red cable from the rear camera extension cord to the + 12V terminal on the reverse lamp bulb. It is recommended that you use the services of a qualified workshop.
6. Connect the USB port to the car charger with a charging extension cable. The wiring extension cable can be laid along the edge of the windshield of the car during wiring.
7. Start the engine and check that the machine is installed correctly. When the machine is installed correctly, the system work indicator lights up; the machine starts to enter the recording state and the recording indicator flashes. Please check if the picture on the display is normal.

Function introduction

1. Motion Detection: in standby, detect an object is moving in front of the camera, the camera will record video automatically, press the OK button to stop and turn off the function
2. Loop recording: to select video time in 1/3/5 minutes, it will delete the first file automatically to keep recording
3. G-sensor: It is one of the most important functions of a car camera. It is a sensor that evaluates all the forces that act on the car while driving and maneuvering on the road, and as a result of road incidents. In a situation where the forces detected by the sensor are higher than those in normal use, the sensor sends a signal to the camera and blocks the recorded video from being deleted. For example, in the event of a collision with another car, or a collision while parking, the G-Sensor’s response automatically saves and blocks the recording. Thanks to this function, we have irrefutable evidence of who was at fault on the road and what were the circumstances of the event, and thus may be used as possible evidence in a case for compensation or proving guilt.
4. Parking mode: turn on Parking mode in the menu. Than in standby mode, once the camera detects any impact, it will turn on automatically, record and secure the video.

Product specification

**** The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services, and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.

Producent:
Megabajt Sp. z o.o., ul.
Rydygiera 8, 01-793 Warszawa

Documents / Resources

| tracer 4.5D FHD Vela Mirror Dash Cam [pdf] Instruction Manual
4.5D FHD Vela, Mirror Dash Cam, 4.5D FHD Vela Mirror Dash Cam, Dash Cam
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>