HMF 6750-65MM Heavy Duty Caster Set Instruction Manual
- October 30, 2023
- HMF
Table of Contents
HMF 6750-65MM Heavy Duty Caster Set
Product Information
The product is a workbench leg assembly with pre-assembled mounting plates and caster wheels. The mounting plates come with screws and nuts for easy installation. The caster wheels are M19 and M16 in size. The workbench leg assembly also includes a pedal bracket for added stability. The product dimensions are 8.00 cm x 3.15 cm for the mounting plates, 4.00 cm x 1.57 cm for the caster wheels, and 4.60 cm x 1.81 cm for the wood screws.
Product Usage Instructions
- Begin by assembling the caster wheels to the pre-assembled mounting plates using the screws and nuts provided. You will need four caster wheels and 24 screws/nuts in total.
- Once the caster wheels are attached, mount the workbench leg assembly to the floor using the wood screws provided. Make sure to attach the pedal bracket assembly for added stability.
- Your workbench leg assembly is now ready for use.
WORKBENCH CASTERS
Please check all accessories before installation:
Pre-assembled mounting plate 4
4 pcs
|
Screws and nuts 28
28 pcs
x4 x24
---|---
Wrenches
2 pcs
M19 M16
| Casters
4 pcs
1.
Assemble the casters to the mounting plates.
| 2.
Finish.
|
Our heavy duty caster set in a 4-pack is the perfect solution to easily position your heavy workbench / piece of furniture at any desired location. Simply press down the foot pedals to lift your workbench / piece of furniture off the floor (up to 1 Inch, please take the installation card as reference). Slide your workbench to the desired location, then lift the foot pedal to place the bench firmly back on the floor. Each 2-1/2″ caster is designed to support up to 165 lbs (660 lbs total weight capacity). Experience the ease of movement with the 360-degree swivel function of the casters. All mounting hardware is included.
PRODUCT OVERVIEW
© Holthoff Trading GmbH HMF.DE | service@hmf.DE