HMF 46161 Fireproof Safe with Electronic Lock Instruction Manual
- October 30, 2023
- HMF
Table of Contents
HMF 46161 Fireproof Safe with Electronic Lock
FIREPROOF SAFE WITH ELECTRONIC LOCK OVERVIEW
Important Notes About Operation / Exclusion Of Liability
Please read carefully this manual before activating the lock. We assume no liability, neither for malfunctions caused by faulty changing, use of force or improper handling, nor in case of property or pecuniary damages due to inappropriate locking of the safe.
Inserting The Batteries
Open the battery compartment cover of the vault and insert four AA batteries into the battery compartment (observe polarity).
Opening The Electronic Lock
Press button C.
Enter 6 digit factory code 1,2,3,4,5,6.
Press button #. A 4 second melody tone confirms the correct code.
Turn knob clockwise to open the lock.
At the end of the code entry sequence a warning tone rings 4 times if an
incorrect code has been entered.
Attention! If an incorrect code is entered 5 times, the lock is locked.
To unlock the lock, the correct code must be entered twice in succession,.
e.g. C 1 2 3 4 5 6 # C 1 2 3 4 5 6 #.
Entering A Personal Code
The door must be open.
Press the # key.
Enter the current code without pressing the C button, e.g. 1 2 3 4 5 6.
Press the # key.
Enter the new 4-16 digit code.
Press the # key.
If the previous code is 1 2 3 4 5 6 and the new code is to become, for example, 4 2 4 2, enter as follows: # 1 2 3 4 5 6 # 4 2 4 2 #.
Attention! Test the new code before closing the door of the safe!
Closing The Vault
Close the door and turn the knob counterclockwise. Now the door is locked!
Batteries
4 x 1.5 V AA alkaline batteries are required to activate the lock. The battery life is 1 year if the lock is operated an average of 3 times per day. Long life or rechargeable batteries cannot be used due to the insufficient energy peak.
| ISSUES | CAUSE / HANDLING |
|---|
The opening mechanism only works sometimes or not at all or the LED or the
button tones do not work.| Weak batteries / please insert fresh AA alkaline
batteries and follow 2. Inserting the batteries!
Attention! The code must be stored again.
The door is warped or the safe closes with difficulty.| Please adjust the safe
door with the help of an Allen key.