EK lighting DIAMONDBACK Pixel-Mappable Full-Color LED Strobe Beam Wash Hybrid User Manual

October 30, 2023
EK lighting

EK lighting DIAMONDBACK Pixel-Mappable Full-Color LED Strobe Beam Wash

Hybrid

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-product-image

Product Information

The Guangdong Yiri Lighting Technology Co., Ltd. Pixel-Mappable
Full-Color LED Strobe/Beam/Wash Hybrid with Zoom is a versatile lighting fixture that can be used for various lighting effects. It is a bar-shaped fixture that can be tilted and zoomed to achieve different beam angles. It has a pixel control feature that allows for precise control of individual LEDs, which can create stunning visual effects. The fixture has a DMX control option and can be connected to a DMX controller for programming and control.

Specifications

  • Function: Pixel-Mappable Full-Color LED Strobe/Beam/Wash Hybrid with Zoom
  • DMX Channels: 119
  • Pixel Control: Yes
  • Power Connection: Standard IEC In/Out
  • Data Connection: 3-pin and 5-pin DMX In/Out, RJ45 Ether CON In/Out

Product Usage Instructions

Installation

  1. Before installation, carefully read the safety instructions in the user manual.
  2. Mount the fixture securely using the mounting bracket.
  3. Connect the power cord to the power outlet.
  4. Connect the DMX cables to the fixture and to the DMX controller.
  5. Turn on the power and test the fixture.

Maintenance

Regular maintenance is necessary to ensure optimal performance of the fixture. Follow the instructions below for maintenance and cleaning of the unit:

  1. Disconnect the product from the power outlet before performing any maintenance.
  2. Clean the fixture using a soft, dry cloth. Do not use water or cleaning agents.
  3. If the fuse needs to be replaced, follow these steps:
    • Disconnect the product from the power outlet.
    • Using a screwdriver, unscrew the fuse holder cap from the housing.
    • Remove the blown fuse and replace with a good fuse of the same type and rating.
    • Screw the fuse holder cap back in place and reconnect power.
  4. If technical problems arise, contact an authorized service center for assistance.

DMX Control

The fixture can be controlled using a DMX controller. It has 119 DMX channels that can be programmed for different lighting effects.
Refer to the DMX channel chart in the user manual for programming options.

Pixel Control

The Pixel Control feature allows for precise control of individual LEDs. This can create stunning visual effects such as pixel mapping and color chases. Refer to the Pixel Control chart in the user manual for programming options.

SAFETY

WARNING Before carrying out any operations with the unit, carefully read this instruction manual and keep it with care for future reference, It contains important information about the installation ,user and maintenance of the unit.

General instruction

  • The products referred to in this manual conform to the European Community Directives and are therefore marked with the CE.

  • The unit is supplied with hazardous network voltage (230V~) .Leave serving to skilled personnel only. Never make any modifications on the unit not described in this instruction manual, otherwise you will risk an electric shock.

  • Connection must be made to power supply system fitted with efficient earthing (Class I appliance according to standard EN60598-1) .It is moreover, recommended to protect the supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

  • The connection to the main network of electric distribution must be carried out by a qualified electrical installer .Check that the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data lable.

  • This unit is not for home use, only professional applications.

  • Never use the fixture under the following conditions:

  • In places subject to vibrations or bumps;
    In places with a temperature of over 40℃.

  • Make certain that no inflammable liquids, water of metal objects enter the fixture,

  • Do not dismantle or modify the fixture.

  • All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly.

  • If the unit is to be put out of operation definitively ,take it to a local recycling
    plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

  • If this device will be operated in any way different to the one described in this manual, it may suffer damage and the guarantee becomes void. Further  more ,any operation may lead to dangers like short circuit, burns, electric shock ,etc.
  • Before starting any maintenance work or cleaning the fixture ,cut off power from the main supply.
  • Always additionally secure the fixture with the safety rope .When carrying out any work ,always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture’s being used.
  • Install the fixture in a well ventilated place.
  • Keep any inflammable materials at a safe distance from the fixture.
  • Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired.
  • The lamp (LED) shall be changed if it has become damaged or thermally deformed.
  • Never look directly at the light beam. Please note that fast changes in lighting ,e.g. flashing light  ,may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
  • Do not touch the product’s housing when operating because it may be very hot.

MAINTENANCE

MAINTENANCE AND CLEANING THE UNIT

  • Make sure the area below the installation place is free from unwanted person during setup.
  • Switch off the unit unplug the main cable and wait till the unit has cooled down.
  • All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded.
  • Housings, fixations and installation spots (celling, trusses, suspensions) should be totally free from any deformation.
  • The main cables must be in impeccable condition and should be replaced immediately even when a small problem is detected.
  • It is recommended to clean the front at regular intervals ,from impurities caused by dust ,smoke ,or other particles to ensure that the light is radiated at maximum brightness. For cleaning ,disconnect the main plug from the socket. Use a  soft ,clean cloth moistened with a mild detergent. Then carefully wipe the parts dry. For cleaning other housing parts use only a soft, clean cloth .Never use a liquid ,it might pernitrate the unit and cause damage to it.

FUSE REPLACEMENT

  1. Disconnect this product from the power outlet.
  2. Using a screwdriver, unscrew the fuse holder cap from the housing.
  3. Remove the blown fuse and replace with a good fuse of the same type and rating.
  4. .Screw the fuse holder cap back in place and reconnect power.

TROUBLESHOOTING

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-12

Contact an authorized service center in case of technical problems or not reported in the above table cannot be resolved by the procedure given in the table.

INTRODUCTION

PIXEL-MAPPABLE FULL-COLOR LED STROBE/BEAM/WASH ZOOMABLE BAR WITH TILT MOVEMENT

FEATURES

  • 14 independently controllable RGBW LED cells to provide super high output of 24K lux for beam and wash effects
  • Stunning strobe effects generated by the 2 outer pixel-mappable CW+WW LED lines
  • White color temperature from 2700K~8000K, RA: W:≥70; CW:≥80; WW:≥90
  • Smooth wide zoomable range from 3~56°
  • Ultra-linear dimming technology with 4 dimming modes and 5 dimming curves
  • Selectable PWM frequencies for flick-free output with any camera
  • Multi selection of pre-programmed macros and special effects
  • Alignment pins on both sides for easy alignments during installation
  • Tilt lock to lock the moving head in a secure position while transportation or before handling any operation
  • DMX/RDM and Art Net control

SPECIFICATIONS

Light Source: RGBW+CW+WW, 1100W, LED
Beam Angle: 3°~56°
Output: 60K lm(peak value)
Color Mixing: RGBW+CW+WW
CRI:W:≥70; CW:≥80; WW:≥90
Zoom: 3°~56°
Strobe: 0~30Hz + strobe effect macros
Dimming: 4 dimming curves with 0~100% dimming
Tilt Movement: 205°(16bit)
Mains: 100~240VAC,50~60Hz
Consumption: 620W /230V
Power Connections: IP Power CON IN/OUT
Protocol: DMX512/RDM/ArtNet+DMX512
DMX Channels: 14CH/32CH/118CH/91CH/119CH
Data Connections: 3pin(or 5pin) DMX IN/OUT linking up to 32pcs at a chain Onboard Menu: 2.83 inches TFT with gravity sensor
IP Rating: IP 20
Cooling: Noiseless fan for forced air
Ambient Temp.: -10℃~45℃
Dimensions: 1000 x 110 x 284.5mm
Weight: 20.3kg
Accessories: Power Cable. Omega Bracket

DMX CHANNELS

88Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
64| 60| Warm White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
85| 81| Cool White13| 000-255| 0~100%
86| 82| Warm White13| 000-255| 0~100%
87| 83| Cool White14| 000-255| 0~100%
88| 84| Warm White14| 000-255| 0~100%

PIXEL CONTROL

PIXEL CONTROL

Total 56 white pixels (28 ww+28 CW)+14 RGBW
white pixels order (WW/ CW)

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-02

DMX CHANNELS

119Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
63| 56| White14| 000-255| 0~100%
64| 57| Cool White1| 000-255| 0~100%
65| 58| Warm White1| 000-255| 0~100%
66| 59| Cool White2| 000-255| 0~100%
67| 60| Warm White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
116| 109| Cool White27| 000-255| 0~100%
117| 110| Warm White27| 000-255| 0~100%
118| 111| Cool White28| 000-255| 0~100%
119| 112| Warm White28| 000-255| 0~100%
88Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
1| 1| Tilt| 000-255| 0~100%
2| 2| Zoom| 000-255| From narrow to wide beam
3| 3| Dimmer| 000-255| 0~100%
4| 4| White Dimmer| 000-255| 0~100%
5| 1| Red1| 000-255| 0~100%
6| 2| Green1| 000-255| 0~100%
7| 3| Blue1| 000-255| 0~100%
8| 4| White1| 000-255| 0~100%
9| 5| Red2| 000-255| 0~100%
10| 6| Green2| 000-255| 0~100%
11| 7| Blue2| 000-255| 0~100%
12| 8| White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
57| 53| Red14| 000-255| 0~100%
58| 54| Green14| 000-255| 0~100%
59| 55| Blue14| 000-255| 0~100%
60| 56| White14| 000-255| 0~100%
61| 57| Cool White1| 000-255| 0~100%
62| 58| Warm White1| 000-255| 0~100%
63| 59| Cool White2| 000-255| 0~100%

PHOTOMETRICS

Beam Angle 3°

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-16

Illuminance(Lux)

Diameter(cm) φ17cm φ28cm φ57cm φ85cm φ133cm
Distance (m) 3m 5m 10m 15m 20m
R 3100 2500 770 124.8 70.2
G 8300 5500 2300 334 187
B 1900 1000 440 63.2 35.5
W 12000 8000 3500 484 272
RGBW 23000 15200 6100 956 537
CW 200 100 15 8.8 4.9
WW 140 80 13 5.8 3.1
ALL 24000 15400 6100 964 542.2

Beam Angle 34°

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-17

Illuminance(Lux)

Diameter(cm) φ185cm φ308cm φ616cm φ925cm φ1233cm
Distance (m) 3m 5m 10m 15m 20m
R 380 170 30 19.1 10.7
G 960 430 100 48.6 27.3
B 180 80 20 9.2 5.1
W 1400 660 150 74.1 47.6
RGBW 2600 1200 290 138.8 78.1
CW 200 100 15 10.7 6
WW 140 80 13 9.1 5.1
ALL 2800 1300 300 152.2 85.6

DIMENSION

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-14

  1. Art-Net In/Out
  2. DMX IN/OUT
  3. Control Panel
  4. Fuse
  5. Power In
  6. Fan for ventilation
  7. Side Lock
  8. Side Lock Pins
  9. Omega Adapting Holes
UP DOWN LEFT RIGHT ENTER
Increase the value display or passes to the previous item in a menu Decreases

the value display or passes

to the next item in the menu

| Return to the top level| Commute from unites, tens, hundreds in the menu|

Confirm the displayed value, or activevates the displayed functions, or enter the sucessive menu

INSTALLATION

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-03

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-04

DMX CHANNELS

119Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
3| 3| Strobe| 108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
4| 4| Dimmer| 000-255| 0~100%
5| 5| White Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
6| 6| White Dimmer| 000-255| 0~100%
7| 7| Device Setting| 000-005| No Function
026-076| Head Reset (Hold 5S)
077-127| Pan/Tilt Reset (Hold 5S)
128-178| Complete Reset(Hold 5S)
179-192| No Function
193-200| Dimmer Mode 1
201-208| Dimmer Mode 2
209-216| Dimmer Mode 3
217-224| Dimmer Mode 4
225-255| No Function
8| 1| Red1| 000-255| 0~100%
9| 2| Green1| 000-255| 0~100%
10| 3| Blue1| 000-255| 0~100%
11| 4| White1| 000-255| 0~100%
12| 5| Red2| 000-255| 0~100%
13| 6| Green2| 000-255| 0~100%
14| 7| Blue2| 000-255| 0~100%
15| 8| White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
60| 53| Red14| 000-255| 0~100%
61| 54| Green14| 000-255| 0~100%
62| 55| Blue14| 000-255| 0~100%

DMX CHANNELS

91Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting

7

|

7

|

Device Setting

| 201-208| Dimmer Mode 2
209-216| Dimmer Mode 3
217-224| Dimmer Mode 4
225-255| No Function
8| 1| Red1| 000-255| 0~100%
9| 2| Green1| 000-255| 0~100%
10| 3| Blue1| 000-255| 0~100%
11| 4| White1| 000-255| 0~100%
12| 5| Red2| 000-255| 0~100%
13| 6| Green2| 000-255| 0~100%
14| 7| Blue2| 000-255| 0~100%
15| 8| White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
60| 53| Red14| 000-255| 0~100%
61| 54| Green14| 000-255| 0~100%
62| 55| Blue14| 000-255| 0~100%
63| 56| White14| 000-255| 0~100%
64| 57| Cool White1| 000-255| 0~100%
65| 58| Warm White1| 000-255| 0~100%
66| 59| Cool White2| 000-255| 0~100%
67| 60| Warm White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
88| 81| Cool White13| 000-255| 0~100%
89| 82| Warm White13| 000-255| 0~100%
90| 83| Cool White14| 000-255| 0~100%
91| 84| Warm White14| 000-255| 0~100%
119Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
1| 1| Tilt| 000-255| 0~100%
2| 2| Zoom| 000-255| From narrow to wide beam

3

|

3

|

Strobe

| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON

OVERVIEW

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-06

The Diamondback may be set up on a solid and even surface. By means of the fixing facilities of the baseplate,the unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required. The bolts of the brackets are placed into the openings provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installation, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture’s being used. Always additionally secure the projector with the safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

DMX CHANNELS

118Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
66| 60| Warm White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
115| 109| Cool White27| 000-255| 0~100%
116| 110| Warm White27| 000-255| 0~100%
117| 111| Cool White28| 000-255| 0~100%
118| 112| Warm White28| 000-255| 0~100%
91Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
1| 1| Tilt| 000-255| 0~100%
2| 2| Zoom| 000-255| From narrow to wide beam
3| 3| Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
4| 4| Dimmer| 000-255| 0~100%
5| 5| White Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
6| 6| White Dimmer| 000-255| 0~100%
7| 7| Device Setting| 000-005| No Function
026-076| Head Reset (Hold 5S)
077-127| Pan/Tilt Reset (Hold 5S)
128-178| Complete Reset(Hold 5S)
179-192| No Function
193-200| Dimmer Mode 1

DMX CHANNELS

118Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
1| 1| Tilt| 000-255| 0~100%
2| 2| Zoom| 000-255| From narrow to wide beam
3| 3| Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
4| 4| Dimmer| 000-255| 0~100%
5| 5| White Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
6| 6| White Dimmer| 000-255| 0~100%
7| 1| Red1| 000-255| 0~100%
8| 2| Green1| 000-255| 0~100%
9| 3| Blue1| 000-255| 0~100%
10| 4| White1| 000-255| 0~100%
11| 5| Red2| 000-255| 0~100%
12| 6| Green2| 000-255| 0~100%
13| 7| Blue2| 000-255| 0~100%
14| 8| White2| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
| | …| 000-255| 0~100%
59| 53| Red14| 000-255| 0~100%
60| 54| Green14| 000-255| 0~100%
61| 55| Blue14| 000-255| 0~100%
62| 56| White14| 000-255| 0~100%
63| 57| Cool White1| 000-255| 0~100%
64| 58| Warm White1| 000-255| 0~100%
65| 59| Cool White2| 000-255| 0~100%

POWER CONNECTION

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-07

Power In

Using Power Con In
Power cable connected in series
Attention: due to the power rating one 1.5mm² power cable can connect 1 unit maximum

Do not connect more than 1 unit in series with one power cable Do not use damage power cable
Turn off the power when the units are not in use

DATA CONNECTION

ETHERNET CONNECTION

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-09

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-10

DMX CHANNELS

32 Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
14| 14| White Effects| 194-201| Effect 25
202-209| Effect 26
210-217| Effect 27
218-224| Effect 28
225-232| Effect 29
233-240| Effect 30
241-248| Effect 31
249-255| Effect 32

15

|

15

|

White Effects speed

| 000-124| Normal
125-130| Static
131-255| Dynamic
16| 16| Device Setting| 000-005| No Function
026-076| Head Reset (Hold 5S)
077-127| Pan/Tilt Reset (Hold 5S)
128-178| Complete Reset(Hold 5S)
179-192| No Function
193-200| Dimmer Mode 1
201-208| Dimmer Mode 2
209-216| Dimmer Mode 3
217-224| Dimmer Mode 4
225-255| No Function
17| 1| Red| 000-255| 0~100%
18| 2| Green| 000-255| 0~100%
19| 3| Blue| 000-255| 0~100%
20| 4| White| 000-255| 0~100%
21| 5| Background Red| 000-255| 0~100%
22| 6| Background Green| 000-255| 0~100%
23| 7| Background Blue| 000-255| 0~100%
24| 8| Background White| 000-255| 0~100%
25| 9| Top Cool White| 000-255| 0~100%
26| 10| Top Warm White| 000-255| 0~100%
27| 11| Bottom Cool White| 000-255| 0~100%
28| 12| Bottom Warm White| 000-255| 0~100%
29| 13| Background Top Cool White| 000-255| 0~100%
30| 14| Background Top Warm White| 000-255| 0~100%
31| 15| Background Bottom Cool White| 000-255| 0~100%
32| 16| Background Bottom Warm White| 000-255| 0~100%

DMX CHANNELS

32 Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
9| 9| Effects speed| 000-124| Normal
125-130| Static
131-255| Dynamic
10| 10| White Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
11| 11| White Dimmer| 000-255| 0~100%
12| 12| White CTO| 000-009| OFF
010-255| CTO 8000K~2700K
13| 13| White Background CTO| 000-009| OFF
010-255| CTO 8000K~2700K
14| 14| White Effects| 000-005| No Function
006-015| Effect 1
016-023| Effect 2
024-031| Effect 3
032-038| Effect 4
039-046| Effect 5
047-054| Effect 6
055-062| Effect 7
063-069| Effect 8
070-077| Effect 9
078-085| Effect 10
086-093| Effect 11
094-100| Effect 12
101-108| Effect 13
109-116| Effect 14
117-124| Effect 15
125-131| Effect 16
132-139| Effect 17
140-147| Effect 18
148-155| Effect 19
156-162| Effect 20
163-170| Effect 21
171-178| Effect 22
179-186| Effect 23
187-193| Effect 24

DATA CONNECTION
Depending on the length of the DMX cable run, or other factors, it may be advisable to install a terminator at the last fixture in the run.
The illustration below shows the correct placement of a 120Ω 0.25W resistor in a terminator, as well as the standard DMX signal pin-outs.

EK-lighting-DIAMONDBACK-Pixel-Mappable-Full-Color-LED-Strobe-Beam-Wash-
Hybrid-11

Relation between DMX and Address

MODE| ALLOCATION| START ADDRESS 1ST FIXTURE| START ADDRESS 2ND FIXTURE| START ADDRESS 3RD FIXTURE| START ADDRESS 4TH FIXTURE
---|---|---|---|---|---
14CH| 001-014| 001| 015| 029| 043
32CH| 001-032| 001| 033| 065| 096
118CH| 001-118| 001| 119| 237| 355

Follow above method for subsequent fixtures, calculating starting addressed as indicated.

EXAMPLE OF DMX ADDRESSING
The below table shows an example of starting addresses for four fixtures assuming a first fixt-ure with starting address of 001.
The actual starting addresses will be determined by the operator as needed to match external controller settings.

NO.| Main Menu| Menu level 1| Menu level 2| Menu level3| Menu level4| Default| Description for use
---|---|---|---|---|---|---|---
1| SETUP| DMX Address| 1-512| | | 1|




DMX Channel

| 14CH| | | 32CH|
32CH| | |
118CH| | |
91CH| | |
119CH| | |
88CH| | |


Protocol

| DMX| | | DMX|
Artnet| | | Artnet only controls color
DMX+Artnet| | |




Ethernet Interface

| Universe| 0-255| | 0|
Start Channel| 1-512| | 1|
Custom IP Address| 2.133.139.215| | 2.xxx.xxx.xxx|
Custom IP Mask| 255.0.0.0| | 255.0.0.0|
Ethernet To DMX| NO| | No|
Yes| |
2| OPTION| ****

Movement Setting

| Tilt Reverse| Off| | Off|
On| |
Encoder Pan/Tilt| Off| | On|
On| |
Display Setting| Warn Cue| Off| | On|
On|
Backlight| Off| | Off| Screen shut off automatically after 30s
On| |
Display Reverse| Off| | Off| Hold UP+DOWN for 3S at main menu
On|
Key Lock| Off| | Off|
On| |
Fixture Setting| ****

Fan Mode

| Auto| | ****

Auto

|
Theatre|
High|


Dimmer Mode

| Dimmer Mode 1| | Dimmer Mode 1|
Dimmer Mode 2|
Dimmer Mode 3|
Dimmer Mode 4|
Dimmer Curve| Dimmer Curve 1| | Dimmer Curve 2|
Dimmer Curve 2|
Dimmer Curve 3|
Dimmer Curve 4|
Dimmer Curve 5|
PWM Frequency| 600Hz| | 2000Hz|
1200Hz|
2000Hz|
4000Hz|
6000Hz|
25000Hz|
LED Reverse| Off| | Off|
On|




Reset Setting

| All| No| | No|
Yes| | |
Tilt| No| | No|
Yes| | |
Zoom| No| | No|
Yes| | |

DMX CHANNELS

32 Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
4| 4| Strobe| 213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
5| 5| Dimmer| 000-255| 0~100%
6| 6| CTO| 000-009| OFF
010-255| CTO 8000K~2700K
7| 7| Background CTO| 000-009| OFF
010-255| CTO 8000K~2700K
8| 8| **** Effects| 000-005| No Function
006-015| Effect 1
016-023| Effect 2
024-031| Effect 3
032-038| Effect 4
039-046| Effect 5
047-054| Effect 6
055-062| Effect 7
063-069| Effect 8
070-077| Effect 9
078-085| Effect 10
086-093| Effect 11
094-100| Effect 12
101-108| Effect 13
109-116| Effect 14
117-124| Effect 15
125-131| Effect 16
132-139| Effect 17
140-147| Effect 18
148-155| Effect 19
156-162| Effect 20
163-170| Effect 21
171-178| Effect 22
179-186| Effect 23
187-193| Effect 24
194-201| Effect 25
202-209| Effect 26
210-217| Effect 27
218-224| Effect 28
225-232| Effect 29
233-240| Effect 30
241-248| Effect 31
249-255| Effect 32

DMX CHANNELS

14Ch Mode

DMX

/ NET

| DMX

+NET

| Function| Value| Percent/Setting
1| 1| Tilt| 000-255| 0~100%
2| 2| Zoom| 000-255| From narrow to wide beam
3| 3| Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
4| 4| Dimmer| 000-255| 0~100%
5| 5| White Strobe| 000-003| Light OFF
004-103| Strobe from low (1Hz) to fast (25Hz)
104-107| Light ON
108-207| Pulsation from slow (0.5 Hz) to fast (25 Hz)
208-212| Light ON
213-225| Random Slow Strobe
226-238| Random Medium Strobe
239-251| Random Fast Strobe
252-255| Light ON
6| 6| White Dimmer| 000-255| 0~100%
7| 1| Red| 000-255| 0~100%
8| 2| Green| 000-255| 0~100%
9| 3| Blue| 000-255| 0~100%
10| 4| White| 000-255| 0~100%
11| 5| Top Cool White| 000-255| 0~100%
12| 6| Top Warm White| 000-255| 0~100%
13| 7| Bottom Cool White| 000-255| 0~100%
14| 8| Bottom Warm White| 000-255| 0~100%

MENU

NO.| Main Menu| Menu level 1| Menu level 2| Menu level3| Menu level4| Default| Description for use
---|---|---|---|---|---|---|---
3| INFORMATION| System Errors| | | | |
System Version| DISP:V1.0| | | |
NET-V1.0| | | |
CTR1-XY:V1.0| | | |
CTR2-MOTOR:V1.0| | | |


Led Hours

| Total Hours| 0~65000H| | |
Partial Hours| 0~65000H| Reset| |
Go Back| |


Fixture Hours

| Total Hours| 0~65000H| | |
Partial Hours| 0~65000H| Reset| |
Go Back| |
Led Temperature| LED A| | | |
LED B| | | |
LED C| | | |
LED D| | | |
UID| 030F0A2*****| | | |
4| TEST| AUTO| Tilt| | | |
Colour| | | |
Zoom| | | |
All| | | |
Channel| 1| Tilt| 0-255| |
2| Zoom| 0-255|
3| Strobe| 0-255|
4| Dimmer| 0-255|
5| White Strobe| 0-255|
6| White Dimmer| 0-255|
7| Red| 0-255|
8| Green| 0-255|
9| Blue| 0-255|
10| White| 0-255|
11| Top Cool White| 0-255|
12| Top Warm White| 0-255|
13| Bottom Cool White| 0-255|
14| Bottom Warm White| 0-255|
5| ADVANCED

(Code:1234)

| Calibration| Tilt Offset| 000-255| | 128|
Zoom Offset| 000-255| | 128
Color Calibration| OFF| | | OFF|
Factory Calibration| Red1-14| <125-255>
Green1-14| <125-255>
Blue1-14| <125-255>
White1-14| <125-255>
customized Calibration| Red1-14| <125-255>
Green1-14| <125-255>
Blue1-14| <125-255>
White1-14| <125-255>
Recove| No| | | No|
Yes| | | |

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals