4MODERNHOME MX7003-W1BK Maxax Black 9.52in H Outdoor Wall Sconce User Manual
- October 30, 2023
- 4MODERNHOME
Table of Contents
4MODERNHOME MX7003-W1BK Maxax Black 9.52in H Outdoor Wall Sconce
Product Information
The MX7003-W1BK is a wall-mounted light fixture that comes with a decorative bent strip and a lamp body. It is recommended to get an electrician to install this light and turn off the electricity at the main circuit breaker before starting the installation. All glass components and/or lamps are fragile, so handle them with care. Wires meeting safety standards are required to connect the electrical circuit. The product contains lead which can cause cancer and birth defects, so do not place the product in your mouth and wash your hands after handling it.
Product Usage Instructions
- Before starting the installation, make sure that the power supply is turned off and remains off until the installation is completed.
- Attach the mounting bracket (C) to the junction box (A) using the box screws (D).
- Connect the wires from the electrical circuit to the wires on the mounting bracket (C) following the wire connection diagram. Use wire caps (B) to secure the connections.
- Attach the siding (E) to the mounting bracket (C) using screws (G) and install the nut (F) to secure it.
- Attach the decorative bent strip (H) to the lamp body (I).
- Insert the light bulb (J) into the lamp body (I).
- Attach the lamp body (I) to the mounting bracket (C) using screws.
- Turn on the power supply and test the light fixture.
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to
support@4modernhome.com or call us at
We will do everything possible to make you completely satisfied with your purchase.
Product reviews help future customers to make their purchase decision. You are encouraged to share your experience by leaving a short product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s)and/or lamp(s).
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit.
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
| Code | Part Description | QTY |
|---|---|---|
| A | Junction box | 0 |
| B | Wire caps | 3 |
| C | Mounting bracket | 1 |
| D | Box screw | 2 |
| E | Siding | 1 |
| F | Install the nut | 2 |
| G | Screw | 1 |
| H | Decorative bent strip | 1 |
| I | Lamp body | 1 |
| J | Light bulb | 0 |