4MODERNHOME 19180-3BR Maxax 3 Light 13 Inch Crystal Chandeliers Light User Manual
- October 30, 2023
- 4MODERNHOME
Table of Contents
4MODERNHOME 19180-3BR Maxax 3 Light 13 Inch Crystal Chandeliers Light User
Manual
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to
support@4modernhome.com or call us at 469-312-6428. We will do everything
possible to make you completely satisfied with your purchase. Product reviews
help future customers to make their purchase decision. You are encouraged to
share your experience by leaving a short product review on the platform where
you bought this product.
Thank you!
Zgear Team
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C.requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile.Use care when handling glass component(s)and/or lamp(s).
- 1A. Lock the crossbar to the junction box of the ceiling by using 2 pcs of 5/32 screws in the accessories bag. 1B.Connect the wires. The hot/positive wire (+) has an ³/´ bare cooper is the ground wire. 1C.Attach the canopy to the ceiling with screws
- Screw together
- Install 3 E12 Light bulbs (Not included).
- Hang the crystal strings to the hole with metal rings.
Light Bulb (Not included)
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required toconnect the electrical circuit.
CAUTION: Risk of fire
Please read all instructions carefully. Before youproceed to install, make sure that the power supplyis turned off and remains off until installation is completed.
PARTS INCLUDED
| Code | Part Description | QTY |
|---|---|---|
| A | Mounting Bracket | 1 |
| B | Canopy | 1 |
| C | Cover Nut | 2 |
| D | Lamp Shade | 1 |
| E | Crystal String 1 | 10 |
| F | Crystal String 2 | 5 |
| G | Crystal String 3 | 1 |