4MODERNHOME T74 25 Inch Table Lamp Instruction Manual
- October 30, 2023
- 4MODERNHOME
Table of Contents
4MODERNHOME T74 25 Inch Table Lamp
Product Information
The T74 lamp product consists of the following components:
- A body (part A)
- A lamp socket (part B)
- A saddle (part C)
- A harp (part D)
- A shade (part E)
- A finial (part F)
Product Usage Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B) into the body(A) until tight.
- Place the harp(D) onto the saddle(C).
- Place the shade(E) onto the harp(D).
- Tighten the finial(F) into the harp(D) until tight.
Note : Please ensure that all parts are securely tightened to prevent any damage or injuries. If you have any questions or concerns about product usage, do not hesitate to contact our customer support team for assistance.
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us an email to
support@4modernhome.com or call us at 870-949-8466.
We will do everything possible to make you completely satisfied with your
purchase. Product reviews help future customers to make their purchase
decision. You are encouraged to share your experience by leaving a short
product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning : If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements If there are any questions, contact a qualified electric
contractor.
Warning : California Residents Proposition 65 This product contains lead,
a chemical known to the state of California to cause cancer and birth defects
or other reproductive harm. Do not place the product in your mouth. Wash your
hands after handling this product.
Caution : It is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile. Use care when
handling glass component(s) and/or lamp(s)
OVERVIEW
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B)into the body(A) until tight.
- Place the harp(D)onto the saddle(C).
- Place the shade(E)onto the harp(D).
- Tighten the finial(F)into the harp(D)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electrical circuit
CAUTION : Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
| A | Body | 1 |
|---|---|---|
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
MADE IN CHINA