SAVOY HOUSE 7-1690-1 Gavin 1-Light Statement Pendant Light Instruction Manual
- October 30, 2023
- SAVOY HOUSE
Table of Contents
SAVOY HOUSE 7-1690-1 Gavin 1-Light Statement Pendant Light
Product Information
- Item No.: 7-1690-1
The pendant light fixture comes with the following parts:
- Canopy (1)
- Ball Nut (2)
- Stem
- Nipple (5)
- Socket Shade (3)
- Bulb (not included)
- Glass (4)
Product Usage Instructions
- Unpack and identify all parts referring to the illustration for parts identification.
- Turn off the power to the installation point.
- Determine the desired height at which the pendant will be installed and select the appropriate stems.
- Thread the wire through the stems and thread the first step onto the nipple (5), the longest stem first. Repeat this process until all required stems are threaded together.
- Refer to the additional installation instructions included with the product for wiring and installation.
- Install the canopy (1) to the ceiling using the ball nut (2).
- Install proper bulbs (not included) into each socket referring to the markings and/or labels on the fixture for maximum wattage.
- Align grooves on glass (4) with bumps on the inside of shade (3) – push up and twist clockwise. Be sure the glass is secure before releasing it.
- Restore power to the installation point and retain this sheet for future reference.
ASSEMBLY INSTRUCTIONS
- Carefully unpack and identify all parts referring to the illustration for parts identification.
- Turn the power to the installation point OFF.
- Determine the desired height at which the pendant will be installed and select the stems.
- Thread the wire through the stems and thread the first stem onto the nipple (5), the longest stem first. Repeat the process until all required stems are threaded together.
- Refer to the additional installation instructions included with the product for wiring and installation.
- Install the canopy (1) to the ceiling using the ball nut (2).
- Install proper bulbs (not included) into each socket referring to the markings and/or labels on the fixture for maximum wattage.
- Align grooves on glass (4) with bumps on the inside of shade (3) -push up and twist clockwise. Be sure the glass is secure before releasing it.
- Restore power to the installation point and retain this sheet for future reference.
Read User Manual Online (PDF format)
Loading......