Simplicity SYNCHRONY SCRS Upright Vacuum Cleaner Instructions
- October 30, 2023
- Simplicity
Table of Contents
Simplicity SYNCHRONY SCRS Upright Vacuum Cleaner
HANDLE ASSEMBLY
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | B484-0214B | Handle Right |
| 2 | B484-0414B | Handle Left |
| 3 | A732-8314 | Screw |
| 4 | A732-2400 | E-Clip |
| 5 | D333-0100 | 35’ Power Cord Assembly |
| 6 | B333-3014B | Strain Relief |
| 7 | A732-1500C | Screw |
| 8 | A430-0405 | Washer |
| 9 | B430-0200 | Spring |
| 10 | B384-0900 | Upper Cord Hook |
| 11 | B384-0800 | Upper Cord Hook Base |
| 12 | B484-0314 | Lower Cord Hook |
| 13 | A732-3400 | Handle Mount Screw |
| 14 | B384-1400D | Handle Tube Base Connector |
| 15 | B484-1000D | Handle Tube |
| 16 | A328-1300 | Switch Carpet/Floor |
| 17 | A328-1200 | Switch On/Off |
| 18 | B123-0100 | Wire Connector Md. |
| 19 | B333-2200B | Handle to Body Harness |
| 20 | D484-3000 | Handle Assembly Complete |
| 21 | D484-1100 | Heavy Duty Handle Kit w/6 Screws For Replacement |
| 22 | B333-3014B | Strain Relief |
DUST COVER
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | D480-3000 | Dust Cover Latch Body Assembly |
| 2 | B480-0914B | Latch Cover |
| 3 | B480-1014 | Dust Cover Latch |
| 4 | B480-4900 | Latch Seal |
| 5 | B480-0814 | Dust Cover latch Body |
| 6 | D480-0761 | Dust Cover Lever |
| 7 | B480-4014 | Dust Cover Seal |
| 8 | A732-8314 | Screw Pan Head HiLo #8×5/8 |
| 9 | D480-0314.2 | Dust Cover Assembly All Synchrony Black Replacement |
| Not Available | Painted Dust Cover Assembly ( SCRD) Chestnut | |
| Not Available | Painted Dust Cover Assembly (SCRD.FETCH) Green | |
| Not Available | Painted Dust Cover Assembly (SCRD.LE) Silver | |
| Not Available | Painted Dust Cover Assembly (SCRP) | |
| Not Available | Painted Dust Cover Assembly (SCRS) Burnt Orange |
MAIN BODY
| KEY | PART NU MBER | D ESCRIPTION |
|---|---|---|
| 1 | S\VH-6 | HEPA Bag 6 Pack |
| 8 211-6000 | HEPA Bag Single Bulk | |
| 2 | 8 480-5314 | Electrostatic Post Filter Bulk (All Models) |
| 8 480-3014 | HEPA Post Filter (All Models) | |
| 3 | 8480-5500 | Secondary Filter Electrostatic Bulk (SCRS) |
| 8480-5700 | Secondary Filter Electrostatic & Charcoal Bulk(SCRD SCRD.LE |
SCRO.FETCH SCRP)
4| 8 480-5600| Direct Air Motor Filter
5| 8480-4600| Post Filter Seal
6| B480-1214| Direct Air Filter Cover
7| A732-8314| Screw Hi Lo #8X5/8
8| B480-ll 14C| Motor Cover
9| 8 480-5200| Motor Cover Filter Foam
10| 8480-14148| Bag Mount
12| A328- II OOB| Thermal Reset Switch
12| 8 333-0600| Thermal Switch Seal
13| A732-84 l4| Screw Hi Lo #8×7/ l 6
14| A328-IOOO| Winged Rocker Switch
15| 8480-3214| Secondary Filter Screen
16| 8 480-3114| Secondary Filter Frame
17| 8483-0JOOC| Internal Wire Harness
18| 8480-5014| Pressure Switch Insert
19| 0480-5000| Pressure Switch Hose Assembly
20| 8 418-0 I OOBK| Main PC Board
21| 0486-2000| Direct Air Motor Assembly
22| 8480-4514| Direct Air Motor Inlet Seal
23| 8480-44008| Direct Air Motor Outlet Seal
24| 8486-04148| Motor Fan
25| 8 470-2100| Pivot Bushing Right
26| 8470-20008| Pivot Bushting Left
27| 8480-5814| Motor Cover Seal Right
28| 8 480-4314| Motor Cover Seal Left
29| 8480-13148| Carry Handle Insert
30| B480-4 l00C| Upper Compartment Seal
31| D480-1 100| Dust Compartment Assembly
---|---|---
32| Order #31| Dust Compartment
33| 8 480-2214| Tilt Lock Body Plate
34| 8480-6300| Wire Inlet Seal
35| 8 480-6200| Back Cover Short Seal
36| 8480-4200| Air Path Back Cover Seal
37| D486-2100| Ametek Clean Air Motor
38| B388-4900| CAM Rear Strip Seal
39| B388-56008| Ametek Rear Ring Seal
40| B486-0600| Ametek Front Motor Mount
41| B480- 1914| Hose Inlet Elbow
42| 8 480-5100| Hose Inlet Elbow Seal
43| B480-4700| Hose Inlet Seal
44| B480-2014B| Lower Crevice Tool Clip
(SCRO SCRD SCRO.LE SCRO.FETCH SCRP)
45| B480- 1714D| Back Cover
46
| 8 480-2114B| Upper Crevice Tool Clip (SCRO SCRO.LE SCRD. FETCHSCRP)
47| A328-1400| Roto Valve Switch
48| A732-9005| Screw
49
| B380-2014| Crevice Tool Clip (SCRD
SCRO.LE SCRO.FETCH SCRP)
50| A732-2500| Screw
51| B480-1614C| Valve Knob
52| D480-1514| Valve Body Assembly
(With Seal)
53| B480-1814| Valve Switch Cover
54| Not Available| Tool Cavity Cover (SCRS)
55| 8 455 -05 14| Hose Inlet Cap Teather (SCRS)
56| B455-04148| Hose Inlet Cap (SCRS)
NOZZLE ASSEMBLY
KEY| P A R T N UM B ER| DE SC
RIPTION
---|---|---
1| D470-0214.2| Nozzle Cover Assembly Black Replacement (All Models)
D470-0285| Nozzle Assembly (SCRO) Chestnut
Not Available| Nozzle Cover Assembly (SC RO.FETCH)Green
Not Available| Nozzle Assembly (SCRO.
LE) Chestnut Painted
Not Available| Nozzle Cover Assembly (SCRP)
Not Available| Nozzle Cover Assembly (SCRS) Burnt Orange
2| 8 470-3200| Nozzle Badge Cover
3| 8 370-0615| Indicator Light Adjust Lens
4| A732-2700| Retaining Ring .125
5| 8 470-0514| Nozzle Bumper
6| 8 470 -03 1 5| Nozzle Lens Right
7| 8 470-0415| Nozzle Lens Left
8| C474-I I00B| Height Adjust Assembly 5 position (SCRO
D474-1200| Height Adjust Assembly 6 position
9| 8 470-1714| Inlet Manifold
10| 8370-43668| Hub Cap
11| A732-3 I00| E -C lip .3125
12| C370-12008| Large Overmolded Wheel Assembly
13| A732-3000| E-Clip .250
14| 8 370 -29008| Rear Wheel Axle
15| 8 418 -0200| LE D Board
16| A350-0000| Light Bulb Xenon l2Volt
17| A350-0I00B| Light Socket
18| 8 470-1200 B| Reflector
19| D475-0500| Agitator Assembly
20| 8350-40008| Retaining Ring
21| C370-1300| Small Overmolded Wheel Assembly
22| 8 470-25008| Height Adjust Axle
23| 8 388-2500C| Agitator Bottom Seal
24| D470-1100D| Baseplate Cover Assembly
25| D475-0400| Belc Idler Assembly Hall Sensor
---|---|---
26| B388-2400C| Agitator Top Seal
27| B375-0214| Idler Arm Cover
28| A0 14 -0 I00| Belt
29| B470 -1514F| Nozzle Base Tray
30| B034-0 100| Strain Relief Washer
31| B470-2200| Pivot Bracket Left
32| B470-2300| Pivot Bracket Right
33| B370-3600| Tilt Lock Pivot
34| C370 – 1400E| Foot Pedal Assembly
35| A732 – 3000| E -C lip .250
36| B370-3800| Tilt Lock Spring
37| B470-2700B| Spring Assist Spring
38| B370-4214C| Spring; Assist Mount
39| B470 -2600| Spring Assist Axle Shaft
ACCESSORIES
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | D355-1200 | Hose Assembly Complete |
| 2 | B455-0214B | Hose Inlet Cuff |
| 3 | B355-1214 | 5-1 Stretch Hose |
| 4 | B355-0214C | Hose Handle Lock Ring |
| 5 | B355-0314B | Hose Handle Swivel Cuff |
| 6 | B388-2700 | Hose Cuff Seal |
| 7 | C355-0814B | Hose Handle Assembly |
| 8 | C355-0914 | Bleed Valve Slide w/Gasket Assy |
| 9 | C626-2500 | Wand |
| 10 | B355-2014 | Crevice Tool |
| 11 | C455-1214 | Upholstery Tool Nylon Bristles (SCRD, SCRD.FETCH, SCRD.LE) |
| C355-1214 | Upholstery Tool Natural Bristles (SCRP) | |
| 12 | C455-1314 | Dust Brush Attachment Nylon Bristles (SCRD, SCRD.FETCH, |
SCRD.LE)
C355-1314B| Dust Brush Attachment Natural Bristles (SCRP)
13| TB1-SU| Handheld Turbo Brush (SCRD.FETCH)
AGITATOR
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | A375-0100 | Hex Nut |
| 2 | A375-0200 | Bearing |
| 3 | A733-1810 | Screw 80mm |
| 4 | A733-1800 | Screw 44mm |
| 5 | B375-3900 | Felt Seal |
| 6 | B375-3600 | End Cap |
| 7 | B375-3700 | End Cap Cover |
| 8 | Not Available | Shaft |
| 9 | B475-0400B | Single Brush Strip Nylon |
| B475-1200 | Single Brush Strip White | |
| B475-1300 | Single Brush Strip Natural | |
| 10 | B475-1700 | Agitator Pulley |
| 11 | B475-1800 | Agitator Bearing Cartridge |
| 12 | B475-1900 | Agitator Felt Retainer |
| 13 | Not Available | Agitator Steel Core |
| 14 | D475-0500 | Agitator Assembly |
DIRECT AIR MOTOR
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | D486-2000 | Direct Air Motor Assembly |
| 2 | B480-4400B | Direct Air Motor Outlet Seal |
| 3 | B486-0314 | Scroll Housing Left MV Inner Behind Fan |
| 4 | B486-0414B | Motor Fan |
| 5 | B486-0214 | Scroll Housing Right MV Fan Cover Outer |
| 6 | A732-8314 | Screw Hi Lo #8X5/8 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>