OVE HDLI013 6-Light Wood and Brass Finish Chandelier Installation Guide
- October 30, 2023
- OVE
Table of Contents
OVE HDLI013 6-Light Wood and Brass Finish Chandelier
INSTALLATION MANUAL
Measures: inch [millimeter]
PACKAGE CONTENT
PART LIST
| PART # **** | DESCRIPTION | QUANTITY | CODE |
|---|
A
| Mounting Plate| ****
1
|
B
| Canopy| ****
1
|
C
| Chain (with quick connectors)| ****
1
|
D
| Nut| ****
1
|
E| Connector|
3
|
F
| Connector| ****
1
|
AA
| Nut| ****
2
|
BB
| Washer| ****
2
|
CC
| Bolt| ****
2
|
DD
| Bolt| ****
2
|
EE
| Twist-cap Connector| ****
3
|
FF| Glove| ****
2
|
TOOLS REQUIRED (not supplied)
SAFETY INFORMATION
CAUTION
Please carefully read the following important safety information before
handling or installing this light. There is a risk of serious injury while
handling this product. To minimize these risks, please note:
- Before starting the installation of this fixture or the removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock.
- Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
- If you have any doubts or questions about the installation of this fixture, consult a qualified electrician.
- Do not cover the product with cloth, paper or any material not part of the product when in use.
- Read and follow all instructions that are on the product or provided with the product.
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Keep this installation manual for future reference.
SAFETY NOTICE
NOTICE
Any modification or alteration from what is specified in this instruction
manual will void any and all warranty on this product.
The distributor is not responsible for any damage to the unit or personal
property caused by improper installation. If you disregard instructional
warnings, you will void your warranty and possibly deal with damage.
Consult the distributor’s website for any additional information or question
on this product’s installation.
PREPARATION
Before beginning assembly, installation or operation of product, make sure
all parts are present. Compare parts with package contents list and diagram on
previous page. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement
parts.
INSTALLATION
1.1. Connect the connector (F) to the connectors (E).
1.2. Connect the connector (F) to the chain (C).
2.1. Loose the nut (D), place it and the canopy (B) at the bottom of the chain
(C). Pass the electrical wires of the lamp through the chain (C), the canopy
(B) and the mounting plate (A). Screw the bolt of the mounting plate (A) into
head of the chain (C).
2.2. Cut the surplus part of the electrical wires. Connect the lamp’s neutral
(N) and live (L) wires to your own, using the twist-cap connectors (EE). Fix
the lamp’s grounding wire to the mounting plate (A) by wrapping it around the
bolt, and then tightening the bolt. Connect the lamp’s grounding wire to your
main grounding wire with a twist-cap connector (EE). Safely stuff the wires
inside your junction box.
2.3. Install the mounting plate (A) to your outlet box with washers (BB),
screws (CC / DD) and nuts (AA).
2.4. Install the canopy (B) to the mounting plate (A) by screwing the nut (D)
back to the chain (C).
3.1. Carefully install the bulbs (not supplied) onto the lamp.
CONSUMER RESPONSIBILITIES
The DISTRIBUTOR’s products will remain beautiful for many years if you
properly care for them.
The DISTRIBUTOR does not recommend the use of harsh abrasive cleansers on any
of its products. Harsh cleansers will damage the finish of your product. This
warranty applies only to the original purchaser and
MAINTENANCE
- For daily maintenance, use a dry cloth.
- Never use abrasive cleaners or strong bleach, scrapers, metallic brushes, or other objects or any products which can graze or tarnish surfaces.
LIMITED 1 YEAR WARRANTY
This warranty extends only to the original owner user for personal household use only. For commercial uses, additional limitations may apply.
- The DISTRIBUTOR warrants your satisfaction with each product. Should any product not meet your satisfaction due to a visual defect, simply return it to your retailer with the original packaging, PRIOR TO INSTALLATION, for a replacement.
- The DISTRIBUTOR warrants, products to be free from defects in workmanship and materials under normal use and service for a period of one (1) year.
- The DISTRIBUTOR will, at its election, repair, replace, or make appropriate adjustment where the DISTRIBUTOR optional inspection discloses any such defects occurring in normal usage within the warranty periods.
- Please note that the DISTRIBUTOR is not responsible for installation or removal costs.
- Modification of any product’s components may void the warranty. This warranty does not cover any claim arising from abuse, misuse, negligence, accident, improper installation or operation on the part of the purchaser. This warranty is void if the DISTRIBUTOR’s product is subject to alterations, or if repairs were done to the product.
- This warranty does not extend to any components installed by dealers, installers or by any party other than the DISTRIBUTOR.
- Implied warranties, including that of merchantability or fitness for a particular purpose, are expressly limited in duration to the duration of this warranty.
- The DISTRIBUTOR disclaims any liability for special, incidental or consequential damages.
Questions, problems, need help?
Call our customer service department at 1-866-839-2888, 8 a.m. – 5 p.m., EST,
Monday – Friday
www.ovedecors.com | [email protected]