A Artman AB00010 Dual Battery Charger User Manual
- October 30, 2023
- A Artman
Table of Contents
A Artman AB00010 Dual Battery Charger
Specifications
Number of Batteries: 2 Lithium Ion batteries required.
Brand: A Artman
Battery Cell Composition: Lithium Ion
Recommended Uses For Product: Camera
Battery Capacity: 2 x 1600mAh
Battery Energy: 7.2v/11.5WH
Battery type: Polymer Li-ion
Charging Status: LED
Charging time: About 90 mins for 1 battery, 180 mins for 2 batteries
Charger Input: 5V / 2.1A max micro USB
Charger Output: 8.4V/1x800mA (only 1 battery) 8.4V/2x550mA (each port)
Battery Life: Recharged up to 2100 times
Description
The Artman AB00010 Dual Battery Charger is an effective and flexible charging option made for photographers and videographers who utilize rechargeable batteries in their equipment. It’s a handy addition that streamlines battery charging and guarantees you’ll never be without fully charged batteries. Professionals and amateurs alike who use a variety of camera brands can benefit from this dual battery charger’s compatibility with a wide range of common camera batteries. It is lightweight and small, making it ideal for photographers who are constantly on the move. The Artman AB00010 Dual Battery Charger is convenient and portable enough to bring along on any trip, photo session, or studio job. This charger’s multiple charging slots are a great time-saving feature, allowing you to charge two batteries at once. When you have many batteries that require charging, this feature will save you time and make sure you’re always ready for long sessions behind the lens. Easy-to-read LED light shows the current charging status of both batteries on the Artman AB00010 Dual Battery Charger. When the batteries are charging, when they are fully charged, or if there are any problems with the charging process, the indicator will light up in the appropriate color.
How To Use
- You must plug the charger into an electrical outlet or a USB port on a computer or portable power source.
- Determine which batteries can be charged together. There is a wide variety of camera batteries that can be charged with the Artman AB00010 Dual Battery Charger. Make sure your batteries are compatible by consulting the user manual or checking the product specs.
- Put the batteries in their designated charging places. For your convenience, the slots are typically labeled or color-coded.
- The charger’s LED status lights will illuminate after the batteries have been installed and charging has begun. It’s possible that the charging state of each battery may be indicated by a separate colored LED light. To decipher the individual hues, consult the guidebook.
- Keep an eye on the charging procedure. To let you know how far along the charging process you are, the LED lights will flash or change color. When the batteries are fully charged, the indicator light should turn from red or orange to green. Depending on the
- battery’s capacity and current charge, this could take some time.
How To Insert Batteries
- Locate the charging slots on the device. The charger usually has two slots, one for each set of batteries, with labels or color codes to indicate which set goes in which slot.
- Get the right kind of batteries for your camera and hold them in the right way. Match up the metal terminals on the battery with the slots on the charger. Depending on how your charger is made, the battery’s label or markings should be pointing up or toward you.
- Put the batteries in their compartments carefully. Use a gentle touch to make sure the batteries go in easily. To guarantee a solid connection, line up the batteries with the terminals.
- The batteries should be pushed in until they reach the bottom of their respective slots. A little click or resistance may be audible or noticeable when the batteries are properly installed.
- After the batteries are installed, the charger may be wired up. The charger can be plugged into a standard wall socket or a USB connection on a computer or portable power bank.
- When the batteries are being charged, the LED lights on the charger will light up. If you want to know what each of the LED colors means, you should look at the instructions.
How To Clean
- Wipe the exterior of the charger with a dry, gentle cloth. This will be useful for getting rid of dirt and fingerprints. The charger’s finish can be scratched by using abrasive materials or strong chemicals, so avoid them if you can.
- Moistening the cloth with water or a gentle, nonabrasive cleaner is helpful for removing grime that refuses to budge. To prevent moisture from getting inside the charger, wring off any extra liquid. Make sure the cloth is simply moist, not soaked, before using it again.
- Use the damp towel to gently wipe the afflicted areas, taking care to avoid getting any liquid into the slots or apertures of the charger.
- A soft bristles brush or cotton swab that is slightly wet with a cleaning solution can be used to clean tight spaces and crevices.
- Allow the charger to dry completely after cleaning the outside before plugging it back in or inserting batteries. The charger’s performance won’t be impaired by dampness if you do this.
- It’s also a good idea to clean the battery connections in the charger slots every so often. To remove dust and debris from the contacts, use a dry towel or a clean cotton swab and wipe in a circular motion. This will keep the batteries connected to the charger for as long as possible.
How To Maintain
- Maintain the charger’s cleanliness by wiping its exterior down on a regular basis using a soft, dry cloth to get rid of dust, fingerprints, and other smudges. The charger’s finish can be scratched by using abrasive materials or strong chemicals, so avoid them if you can.
- Don’t forget to put the charger away somewhere dry and cool while it’s not in use. Avoid putting it in places where the temperature, humidity, or direct sunlight could compromise its functionality or shorten its lifespan.
- Be gentle with it: Take care not to damage the batteries or the charger when installing or removing them. Never intentionally damage the charging port or apply undue force. Mishandling increases the risk of faults and breaks.
- Don’t mix and match battery types; Use batteries that are compatible with your charger. If you use batteries that aren’t the right kind or aren’t compatible with your charger, you could damage the device or your batteries.
- Keep to the prescribed pricing: Charge it according to the instructions in the user handbook or as directed by the manufacturer. Batteries’ performance and lifespan can be impacted by whether they are overcharged or undercharged. When batteries are fully charged, don’t leave them in the charger for too long.
- Maintain a healthy connection by routinely checking and cleaning the charger slots and the battery contacts inside of them. To remove dust and debris from the contacts, use a dry towel or a clean cotton swab and wipe in a circular motion. A strong connection and rapid charging are the results of clean contacts.
- Verify for new firmware versions: Keep an eye on Artman’s website over time to see if there are any software or firmware updates available for your charger model. Performance, features, and bugs can all benefit from these improvements.
- Read the instructions! Read through the Artman user manual to get started. It details how to operate the charger, basic safety precautions, and detailed upkeep instructions for your individual model.
FAQ’s
Which batteries are compatible with the Artman AB00010 Dual Battery Charger?
The Artman AB00010 Dual Battery Charger is compatible with a wide range of camera batteries. Please refer to the product manual or specifications to ensure compatibility with your specific camera battery model.
Can I charge two different types of batteries simultaneously?
No, the Artman AB00010 Dual Battery Charger is designed to charge two batteries of the same type simultaneously. Mixing different battery types may result in improper charging or damage to the batteries.
Does the charger come with a power adapter?
The Artman AB00010 Dual Battery Charger may come with a power adapter or a USB cable for charging. Please check the product package or description to see if a power adapter is included.
Can I charge other devices like smartphones or tablets with this charger?
No, the Artman AB00010 Dual Battery Charger is specifically designed for camera batteries and may not be compatible with charging other devices.
How long does it take to fully charge a battery?
The charging time depends on the capacity of the battery being charged. Higher-capacity batteries generally take longer to charge. Refer to the battery manufacturer's specifications for estimated charging times.
What is the Yesker 13 LED Ringlight Kit used for?
The Yesker 13 LED Ringlight Kit is ideal for shooting cosmetic tutorials, live streaming, making selfie videos, photography, videography, studio shot, portrait photos, and more.
What is included in the box?
The Yesker 13 LED Ringlight Kit includes 1x LED Ring Light, 1x ball head, 1x phone holder, 1x Adapter+1xUS Plug, 1x 190cm light stand, and 1x Carry Bag.
What is the size of the ring light?
The Yesker 13 LED Ringlight Kit has a wide 18
Is the ring light adjustable?
Yes, the ring light has a large dimming range (from 10% to 100%) and a color temperature adjustment (from 3200K to 6000K) that doesn't require the use of color filters. Quickly and easily achieve either a cold white light or a warm light to cover imperfections and alter skin tones.
What is the tripod made of?
The tripod is made of aluminum alloy and has three sturdy legs and a reliable locking mechanism to ensure that your belongings will remain secure throughout use.
What is the maximum height of the tripod?
The height of the tripod is adjustable from 31.5
What type of devices can be used with the ring light?
The Yesker 13 LED Ringlight Kit supports most standard-sized single-lens reflex cameras through its included hot-shoe adaptor and holds phones up to 4.13 inches in width without requiring removal. It can be used with your mirrorless camera, smartphone, DSLR, or smartphone mirror.
How do I clean the ring light?
Before cleaning the ring light, remove any phones or other attachments you may have made to it. The ring light may be cleaned without any hassle. Remove any dust or debris from the ring light's surface with a clean, soft microfiber cloth. Lightly dampen the microfiber cloth with a mild cleaning solution if there are any stubborn stains or dirt on the ring light. It's important to choose a cleaning solution that's safe for the ring light's construction. Don't use anything too abrasive or chemically strong on the surface.
How do I maintain the ring light?
Keep the ring light and its parts free of dust, debris, and fingerprints by cleaning them on a regular basis. Take care not to bump or drop the ring light when you put it up or relocate it. The ring light should be kept dry and protected while not in use. Protect it from dirt, moisture, and potential drops by keeping it in its original packaging or a hard case. Keep an eye out for manufacturer-issued upgrades for the firmware and software that comes with your Yesker 13 LED Ringlight Kit. Updates are often released to address bugs, add new features, or boost performance.
Are there any safety features in the charger to prevent overcharging or overheating?
Yes, the Artman AB00010 Dual Battery Charger incorporates built-in safeguards to prevent overcharging, short-circuiting, and overheating. It is designed to provide safe and efficient charging for your batteries.