THEXCEPTIONAL EX60 Tool Toter Bucket Installation Guide

: October 30, 2023
: THEXCEPTIONAL

Table of Contents

THEXCEPTIONAL EX60 Tool Toter Bucket
Product Information
Product Usage Instructions
installation
Product Components
MISSING PARTS?
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THEXCEPTIONAL EX60 Tool Toter Bucket

THEXCEPTIONAL-EX60-Tool-Toter-Bucket-product

Product Information

The EX60 Tool ToterTM Bucket is a tool tote designed to help you carry and organize your tools. The tote is made up of a Bucket Body and three Support Tubes that provide structural support to the tote. The tote comes with Velcro hook & loop pads that help you keep the tote tightly folded over the support tubes. In case of any missing parts, you can contact Vertex Products customer service by sending an email to service@vertexproducts.com or by texting 612-709-9534.

Product Usage Instructions

Make sure you have all the product components before beginning assembly
Slide one Support Tube into each slot sewn inside the tote body. You may need to push hard as the tube nears the bottom. There is a flap inside the slot that may feel like a blockage or like it is sewn shut. It may take a harder push for it to pass through
Tightly fold over the strap and attach the Velcro hook & loop pads to keep the tote tightly folded over the support tubes.

Note: If you find any missing parts, contact Vertex Products customer service by sending an email to service@vertexproducts.com or by texting 612-709-9534. Inquiries received by 2 PM CST will be shipped the same business day.

installation

STEP 1
Before beginning assembly, you should have:

Product Components

A Tool Toter™ Bucket Body
B Support Tubes (3X)

MISSING PARTS?

Send the following to service@vertexproducts.com or text 612-709-9534

Model Number & Place of Purchase
Letter & Description of missing part
Your Name and Address

Inquiries received by 2 PM CST will be shipped same business day

STEP 2

Slide a support tube into each slot sewn inside tote body as shown
Tightly fold over strap and attach the Velcro hook & loop pads as shown

Note : You may need to push hard as the tube nears the bottom. There is a flap inside the slot that may feel like a blockage or like it is sewn shut. It may take a harder push for it to pass through.