THEXCEPTIONAL EX140 Sit’n Kneel With ROCKr Foot Installation Guide
- June 12, 2024
- THEXCEPTIONAL
Table of Contents
EX140 Series
ROCKr™ Sit’n Kneel™
EX140 Sit’n Kneel With ROCKr Foot
PLEASE HELP US BE BETTER OUR JOBS
DEPEND ON IT
| GIVE US 5 STARS | OR | GIVE US5 MINUTES |
|---|---|---|
Something POSITIVE?
Please share a positive product review.| Something NEGATIVE or need
improvement?
PLEASE tell us directly
Service@vertexproducts.com
612-709-9534 – Text, photos or call
We do our absolute best to make things right
EVERY TIME
No product is perfect and ONE bad review destroys even the best ideas. We
hope you choose discussion over destruction to give us a chance to make it
right.
Be kind, be fair and be honest; while appreciating the well-intended hard work
our team has enthusiastically dedicated.
We appreciate your business and supporting our Made in America initiative.
Respectfully,
TheXceptional
Service Team
STEP 1
Before beginning assembly, you should have:
Assembly Tools Needed
Phillips Screwdriver, #2|
---|---
Hammer or Tapping Device|
Product Components
A Seat
B Leg, Left
C Leg, Right
D Foam pad
E Kneeler Foot (2X) 
Hardware Pack
MISSING
PARTS?
Send the following to
service@vertexproducts.com
or text 612-709-9534| 1. Model Number
& Place of Purchase
2. Letter & Description of missing part
3. Your Name and Address| Inquiries received by 2 PM CST will be shipped same
business day
---|---|---
STEP 2
A: Assemble as shown below 
ASSEMBLY NOTE
For maximum stability, the legs are designed as a WEDGE FIT.
This MAY require tapping the seat onto one or both legs.
For best results – insert leg as far as possible with hands.Then turn kneeler
over into sitting position as shown and TAP the seat onto legs. You may want
to cover the area with something to protect the seat while
tapping.
STEP 3
A: Place on flat surface as shown
B: Test fit pad to understand alignment
C: Remove adhesive backer and install as shown, pressing firmly to ensure
proper adhesion 
STEP 4 – Models EX142 & EX144
A: Turn over to Sit’n Position
B: Test fit Tush Pad to understand alignment
C: Remove adhesive backer and install as shown, mpressing firmly to ensure
proper adhesion 
STEP 5 – Model EX144
EX60
Tool Toter™ Bucket
Components
A Tool Toter™ Body
B Support Tubes (3X) STEP 2
A: Slide a support tube into each slot sewn inside tote body as shown B:
Tightly fold over strap and attach the Velcro hook & loop pads as shown
Note: You may need to push hard as the
tube nears the bottom. There is a flap inside the slot that may feel like a
blockage or like it is sewn shut. It may take a harder push for it to pass
through.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>