VEVOR 2125B Stair Climbing Cart User Manual
- October 30, 2023
- VEVOR
Table of Contents
TOUGH TOOLS, HALF PRICE
STAIR CLIMBING CART 2125B USR MANUAL
We continue to be committed to provide you tools with competitive price. “Save HaIr. ‘Half Price or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appear- ance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves clear interpretation of our user
manual.
The appearance of the product shall be subject to the product you received.
Please forgive us that we won’t inform you again if there is any technology or
software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
- Please do not put it near flammable materials.
- It is forbidden to carry people at any condition.
- Please pay attention to safety when going up and down stairs.
- Overload is strictly prohibited.
- Don’t move too fast when passing potholes areas.
Model and Parameters
| Model | 2125B |
|---|---|
| Maximum Load(Flat Ground) | 250kg |
| Maximum Load(Climb Stairs) | 150kg |
| Overall Dimensions | 152.845.852.3cm |
Structure Diagram
| 1.Handle 1 | 5.Climbing Wheel |
|---|---|
| 2.Handle 2 | 6.Wheel |
| 3.Frame | Frame |
| 4.Trim Strip | 7.Tray |
COMPONENTS
Assembly and Use
- Place the reinforcement(E) inside the frame(A) (below the hole), and then insert the tray(D).
- Place the wheel frame(B) on the outside of the frame as shown in the figure, align it with the hole, and finally fix it with the outer hexagon bolt (L+N).
- Insert the axle (F) into the wheel frame, insert the cotter pin (K) inside the wheel frame and bend it, and put the gasket (J) outside.
- Install the wheel set (C), insert the cotter pin (K) and bend it.
Put in handle 2 (H), handle 1 (G) and trim strip (I) in turn, align them with the holes and fix them with crosshead bolts (M+N).
Troubleshooting Instruction
| Problem | Reasons | Solution |
|---|---|---|
| Wheel rolling is not smooth | Insufficient lubrication | Add oil to lubricate |
the rotating parts
Velcro is not sticky| The Velcro has sundries| Clean the hair, thread, and
other sundries on the Velcro
Maintenance
- Avoid prolonged exposure to the sun to avoid aging.
- Avoid children taking the stair climbing cart to play.
Manufacturer: Jinhua Development Measuring Tools Co.,Ltd.
ADD Qiubin industrial park, Wucheng District, Jinhua,
Zhejiang province
MADE IN CHINA
E-mail:CustomerService@vevor.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>