OmniCore Designs 850008244483 InstaShade XL 4 Person Pop Up Easy Set Up Beach Tent Instruction Manual
- October 30, 2023
- OmniCore Designs
Table of Contents
OmniCore Designs 850008244483 InstaShade XL 4 Person Pop Up Easy Set Up
Beach Tent Instruction Manual
Set Up
-
Lay beach tent flat with easy-up hub upright. Ensure poles are fully extended and spread out.
-
Standing behind the tent, pull the cords up and away from each other. Continue to pull the cords until the upper and lower sections of the hub connet.
-
As the hubs get closer to connecting, the resistance will increase and the body of the tent will form. Once secure you will hear the easy-up hub “click” into place.
-
For security and stability, stake down the corners of shelter to secure in place. Sand pockets can be filled for additional stability
-
IMPORTANT! Once the easy-up hub is in place, tie the drawstring into a bow. This will help to prevent the potential of the tent collaspsing.
Take Down
-
Untie the cords and separate the easy-up hub by pushing down the lower hub poles.
-
Gently lower down the entire easy-up tent.
-
Holding the easy-up hub upright, fold fabric and poles inward towards the hub.
Packing the Tent
- Fold the poles as shown
- Lay the tent on its side. Gather all poles tightly to the hub to prevent pole damage
- Bring all excess fabric together and roll tightly towards the easy-up hub
- Use provided straps to tightly tie the rolled tent
- Place the tent in storage bag for extended storage