HOMEDEPOT 63017740 4.0 Full Adjustable Base User Guide
- June 4, 2024
- HOMEDEPOT
Table of Contents
HOMEDEPOT 63017740 4.0 Full Adjustable Base
Adjustable Base Parts List
Miscellaneous Parts (not included): Surge Protector (1) , 9 Volt Batteries (2) All electronics and components that need to be installed are located in boxes under the base or attached to the frame.
HOW TO USE
-
STEP 1
Place the bed base box in a desired location with the bottom of the box facing up. Remove the binding straps and packing materials, making sure not to puncture the box with any sharp objects. -
STEP 2
Remove the bed base from the box. Unfold the bed making sure to keep the bottom of the bed facing upwards.
-
STEP 3
To install Headboard Brackets (sold separately) see instructions on page 12 of the Owner’s Manual. To install the legs, thread the leg into the frame, and tighten by hand. Do not over-tighten. -
STEP 4
To sync two bases see detailed installation instructions on pages 10-11 of the Owner’s Manual. It is recommended to leave the battery backup strap attached to the power supply for use when needed. 2 9V batteries (not included) will be required for its use. -
STEP 5
Uncoil Input Cord (connected to Control Box’s power port) and plug into Power Supply. -
STEP 6
Uncoil the Power Cord and connect it to the Power Supply. Place Power Supply on the ground and extend from the base. Ensure that the Power Supply and all attached cords are directed to the desired surge protector. -
STEP 7
Carefully flip the base over on to its legs. Important: Two people are required to move the bed base. Do not drag across the floor. Do not rest frame on its side, excessive pressure may damage the legs. -
STEP 8
Plug the Power Cord into a power source. A surge protector is recommended. -
STEP 9
Ensure that batteries are correctly installed in the remote. Quickly test remote functions to verify proper setup before placing mattress on base. Return the base to a FLAT position before placing the mattress on top. -
STEP 10
To install the mattress retainer bar, insert each end of the bar into the holes at the foot of the platform.
-
STEP 11
Give Remote – Quick Use Guide to customer. Ask them to read the Warning and Use Instructions to see if they have any questions. Advise them to store the Remote – Quick Use Guide for future reference. Setup is now complete! Test all functions on remote.
For customer support, call Customer Service: US 1-800-499-1965 | Canada 1-800-268-4414
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>