SaiFeng True Wireless Headset User Manual
- October 30, 2023
- SaiFeng
Table of Contents
True Wireless Headset
User Manual
Product diagram
- P60 true wireless headset host
- P60 real wireless headset charging box
- Micro 5pin charging cable
- instruction manual
Product specification
Product model: Y60
True wireless version: V5.3
Battery specification: earphone 3.7v ; Charging bin 3.7v
Supported mode: HFP/HSP/ A2DP/AVRCP
Sensitivity: 105dB ±3dB S.P.L at 1KHz
Signal distance: 10 m (in an ideal environment without any large
obstacles)
Playing time: about 3.5 hours
Talk time: approximately 3.5hours
Standby time: about 80 hours
Charging time: charge the charging warehouse for about 1hours, and charge
the headset for about 1 hour
Charging times for the headset: about 2 times
Functional instructions
-
Boot
Take the headset out of the charging bin and start it automatically or long press the left and right multi-function button of the headset for 3 seconds. -
Shut down
Put the earphone into the charging chamber and turn it off automatically. Long press the left and right earphone multifunction keys for 5 seconds to turn it off -
Boot back
When the pairing is successful, the bluetooth headset will first enter the state of reconnect when the second time is started and automatically reconnect the connected phone. -
Play/pause
In standby state, click the left or right earphone multifunction button to play music directly, while click the left or right earphone multifunction button to pause playing. -
Switch songs
Press the left earphone muti_function button for 2 seconds to play music, and then press the right earphone muti_function button for 2 seconds to play music. -
Volume up and down
Double-click the left earphone multifunction button to increase the volume step by step, and double-click the right earphone multifunction button to decrease the volume step by step -
Answer incoming calls
When the phone calls, click on the multi-function key around earphones can answer the phone, earphones with voice noise reduction function, make the call more clear. -
Call hang up
When talking on the mobile phone, you can hang up the phone by clicking the left or right earphone multifunction button. -
Call relection
When the phone calls, long press the left and right earphone multifunction button for 2 seconds to reject the call. -
Redial
When you are on standby or playing music, you can make the last call in your phone record by three clicks of the left earphone multifunction button. -
Start voice assistant
Three clicks on the right earphone multifunction button can activate apple’s Siri or Google voice assistant for voice control of the phone operation. -
Low battery alert
When the headphone battery is insufficient, the interval of 60 seconds to play a low battery sound, until the headphone low power off.
Common pairing style
- Take it out from the charging bin or press the left and right multi-function area for 3 seconds at the same time, turn it on until the indicator light flashes alternately, enter the pair-ear search matching state, enter the pair-ear automatic matching state, after the successful matching, the main ear indicator lights flash alternately, the auxiliary ear indicator lights turn off, and the pair ear matching success cue tone is played simultaneously.
- Enable wireless capabilities on your phone or other devices. If it’s an android phone or device, click the“Search for wireless devices” option on your phone. If It’s an IOS phone or device, it will search for devices automatically After searching for the model of the wireless headset, click enter the match. After the match is successful, the headset will give a notification tone that the connection is successful. The left and right headset lights will turn off and enter the connection standby mode, the right ear was the right vocal tract and the left ear was the left vocal tract.
- The two headphones can also be paired with the mobile phone separately. The operation method can be operated according to the operation method of STEP 2 above.
Charging Operation
- Plug the Micro USB charging cable into the charging bin and the Charger at one end. The Charger uses a standard 5V 1A charger to charge the bin.
- Charging the headphones: the headphones can be automatically charged into the charging bin, charging the headphone indicator light will be lit, full of electricity after the extinguishment;
Precautions
- Please charge in a safe environment. When charging the charging bin, the charging bin should be separated from the charger as soon as possible, so as to avoid damage to the charging bin caused by charging for a long time.
- When the music is playing, please adjust the music to the appropriate volume to avoid long-term damage to the hearing under the condition of high volume.
- Try to avoid using the earphone where there is interference source, otherwise it may affect the earphone signal.
- Try to avoid using the earphone in a corrosive environment, so as not to affect the function of the earphone.
Tips: when you use this bluetooth headset to listen to music or talk,
please pay attention to adjust the volume, so as not to affect your listening
too much!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID: 2BBFL-Y60