Einhell TE-CB 18-180 Li Cordless Compact Blower Instruction Manual
- October 30, 2023
- Einhell
Table of Contents
TE-CB 18/180 Li
Operating instructions
Cordless Compact Blower
Art.-Nr.: 3408005
TE-CB 18-180 Li Cordless Compact Blower
Danger! – Read the operating instructions to reduce the risk of injury.
Store the batteries only in dry rooms with an ambient temperature of 50°F to
104°F (+10°C to +40°C).
Place only fully charged batteries in storage (charged at least 40%).
DANGER!
When using the equipment, a number of safety precautions must be observed to
avoid injuries and damage. Please read the complete operating instructions and
safety information with due care.
Keep these operating instructions in a safe place so that the information is
available at all times. If you give the equipment to any other person, hand
over these operating instructions and the safety information as well. We
cannot accept any liability for damage or accidents which arise due to failure
to follow these instructions and the safety information.
Safety information
Read All Instructions
WARNING: When using electric gardening appliances, basic safety
precautions should always be followed to reduce the risk of fi re, electric
shock, and personal injury, including the following:
FOR ALL APPLIANCES
-
Avoid dangerous environments – do not use appliances in damp or wet locations.
-
Don’t use in rain.
-
Keep children away – all people and pets should be kept at a distance from the work area.
-
Dress properly – do not wear loose clothing or jewelry. They can be caught in moving parts. Wear protective clothing; use of work gloves, long pants, a long sleeved shirt and safety footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.
-
Use safety glasses – always use face or dust mask if the area in which you are working is dusty. The purpose of the safety rules is to attract your attention to possible dangers.
The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instruction or warnings they give are not substitutes for proper accident prevention measures. -
Use right appliance – do not use appliance for any job except that for which it is intended.
-
Do not force appliance – it will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
-
Do not overreach – keep proper footing and balance at all times.
-
Stay alert. Use common sense. Do not operate appliance when you are tired or under the influence of drugs, alcohol or medication.
-
When not in use, appliances should be stored indoors in dry places out of reach of children.
-
Maintain appliance with care. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease. • Check damaged parts. Before using the appliance, make sure the safety guards are intact. Never use a tool without its safety guard. Check the alignment of the moving parts, the binding of the moving parts.
-
Check for broken or defective parts that can affect the safe operation of your tool. A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless indicated elsewhere in this manual.
-
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
-
Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
-
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. (This advice is considered correct for conventional NiMh, NiCd, lead acid and lithium-ion cell types. If this advice is incorrect for a cell design that differs from these, then the correct advice may be substituted.)
-
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause explosion.
-
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
-
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
-
Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.
1.) FOR ALL BATTERY-OPERATED APPLIANCES:
- Do not charge appliance in rain, or in wet locations.
- Do not use battery-operated appliances in the rain. Always remove or disconnect battery pack before adjusting, cleaning, servicing or transporting the cordless compact blower.
2.) FOR ALL BATTERY-OPERATED PRODUCTS EMPLOYING A DETACHABLE OR
SEPARABLE
BATTERY:
-
Use only the following type and size battery:
18V 1.5Ah PXC lithium-ion battery
18V 2.0Ah PXC lithium-ion battery
18V 2.5Ah PXC lithium-ion battery
18V 3.0Ah PXC lithium-ion battery
18V 4.0Ah PXC lithium-ion battery
18V 3.0Ah PXC Plus lithium-ion battery
18V 4.0Ah PXC Plus lithium-ion battery
18V 5.2Ah PXC Plus lithium-ion battery
18V 4.0Ah/6.0Ah PXC Plus lithium-ion battery
18V 5.0Ah/8.0Ah PXC Plus lithium-ion battery -
Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
-
Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
-
Exercise care in handling the battery in order not to short it with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
3.) AVOID UNINTENTIONAL STARTING – DO NOT INSERT BATTERY WHILE YOUR FINGER IS ON THE SWITCH. BE SURE SWITCH IS OFF WHEN INSERTING THE BATTERY.
GENERAL SAFETY WARNINGS FOR THE BATTERY PACK
-
Dispose of used battery promptly and properly. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
-
Keep battery out of reach of children and in original package until ready to use.
-
Never put batteries in one’s mouth. If swallowed, contact local poison control centre immediately.
-
CAUTION – The battery used in this device may present a risk of fire or chemical burn if mishandled. Replace battery with Einhell/ lawn master brand only. Use of another battery may present a risk of fire or explosion.
-
WARNING: Do not use a visibly damaged battery pack or appliance.
-
WARNING: Do not modify or attempt to repair the appliance or the battery pack.
-
BATTERIES MUST BE RECYCLED.
-
Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer where they may short circuit each other or be short-circuited by conductive materials.
-
Do not subject cells or batteries to mechanical shocks.
-
Keep cells and batteries clean and dry. Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
-
Do not maintain secondary cells and batteries on charge when not in use.
-
Retain the original cell and battery. Do not use any charger other than that specifically provided for use with the equipment. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
-
When possible, remove the battery from the equipment when not in use.
-
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliances that have the switch on invites accidents.
-
Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. -
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
-
Protect your rechargeable battery against moisture, rain and high humidity. Moisture, rain and high humidity can cause dangerous cell damage. Never charge or work with batteries which have been exposed to moisture, rain or high humidity – replace them immediately.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER
WARNING: This product may contain lead, phthalate or other chemicals known to
the State of California to cause cancer, birth defects and other reproductive
harm. Please wash your hands after use.
Special safety information for cordless compact blower
- Always walk. Never run.
- Always keep the ventilation opening clean.
- Never direct the blow hole at persons or animals.
- Watch out for children, pets, open windows etc. and blow the foreign objects safely away from them.
- Warning: This machine is not designed for use by children.
- Warning: Risk of injury from rotating parts.
- Warning: Never use this equipment near open windows.
- This equipment is not designed to be used by people (including children) with limited physical, sensory or mental capacities or those with no experience and/or knowledge unless they are supervised by a person who is responsible for their safety or they have received instructions from such a person in to how to use the equipment safely. Children must always be supervised in order to ensure that they do not play with the equipment.
- The equipment is not allowed to be used when there are people – particularly children – or pets nearby.
SAVE THESE INSTRUCTIONS
Layout and items supplied
2.1 Layout
- Blower tube
- On/Off switch
- Motor unit
- Selector switch for positions
- Attachable nozzles
- Battery capacity indicator
- Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as specified in the scope of
delivery. If parts are missing, please contact our service center or the store
where you made your purchase at the latest within 5 work days after purchasing
the article and upon presentation of a valid bill of purchase.
- Open the packaging and take out the equipment with care.
- Remove the packaging material and any packaging and/or transportation braces (if present).
- Check to see if all the items are supplied.
- Inspect the equipment and accessories for transport damage.
- If possible, keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play
with plastic bags, plastic sheets and small parts. There is a risk of choking
and suff ocating!
- Cordless compact blower
- Blower tube
- Attachable nozzles
- Original operating instruction with safety information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specific models of batteries and charger available in your area. You can also explore battery + charger options at Einhell.com.
Intended use
The cordless blower is designed for use in the work shed for removing dust and
particles of dirt or making them into piles in areas which are hard to reach.
It can also be used for pumping air into objects such as air mattresses or
similar using the attachable nozzles (5) included in delivery.
The equipment is allowed to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries of any kind resulting
from such misuse.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses or for equivalent
purposes.
Technical data
Motor power supply: ……………………….18 V ****
No load speed setting 1: …. 0-11500 RPM (min-1)
No load speed setting 2: ….. 0-15500 RPM (min-1)
Blow speed setting 1: …………..81 mph (130 km/h)
Blow speed setting 2: …………112 mph (180 km/h)
Weight: ……………………………………… 2.2 lbs (1 kg)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Reduce noise generation and vibration to a minimum!
- Use only equipment that is in perfect condition.
- Maintain and clean the equipment regularly.
- Adapt your way of working to the equipment.
- Do not overload the equipment.
- Have the equipment checked if necessary.
- Switch off the equipment when not in use.
CAUTION!
Residual risks
Even if you use this electric power tool in accordance with the instructions,
certain residual risks cannot be eliminated. The following hazards may arise
in connection with the equipment‘s con-struct ion and layout:
- Lung damage if no suitable protective dust mask is used.
- Damage to hearing if no suitable ear protection is applied.
- Health damage caused by hand-arm vibrations if the equipment is used over a longer period or is not properly guided and maintained.
Before starting the equipment
5.1 Fitting the blower tube (Fig. 2)
Connect the motor unit (3) and blower tube (1) together (Fig. 2). To secure
the blower tube, turn it clockwise until it clicks into position (Fig. 2).
5.2 Fitting the nozzles (Fig. 3)
Fit the attachable nozzles (5) in the same way as the blower tube (1). To do
so, remove the blower tube (1) from the motor unit (3) and then fi t the
attachable nozzles (5). You will have to use a diff erent nozzle according to
the type of valve.
Operation
6.1 On/Off switch (Fig. 1/pos. 2)
Switching on:
To switch on, press and hold the On/Off switch (2).
Switching off :
Release the On/Off switch (2)
6.2 Speed control (Fig. 1)
The equipment has two speed settings. To select
a speed, push the selector switch (4) into the
desired position (1 or 2).
Note:
Activate the selector switch (4) only when the equipment is at a standstill.
6.3 Charging the Lithium-Ion battery (not included)
The corresponding instructions can be found in the original operating
instructions for your charger.
6.4 Battery capacity indicator (Fig. 4 / item 6)
Press the battery capacity indicator switch (7).
The battery capacity indicator (6) shows the charge status of the battery
using 3 LEDs.
All 3 LEDs lit:
The battery is fully charged.
2 or 1 LED(s) lit:
The battery has an adequate remaining charge.
1 LED fl asking:
The battery is empty, recharge the battery.
All LEDs fl asking:
The temperature of the battery is too low. Remove the battery from the device
and leave it at room temperature for a day. If the error occurs again, this
means that the battery has been completely depth-discharged and is defective.
Remove the battery from the device. Never use or charge a defective battery.
Cleaning and maintenance
HAZARD!
Always take the battery out of the equipment before starting any cleaning
work.
7.1 Cleaning
- Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure.
- We recommend cleaning the equipment immediately each time after use.
- Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be aggressive to the plastic parts in the equipment. Ensure that no water can get into the interior of the equipment. The ingress of water into an electric power tool increases the risk of an electric shock.
7.2 Maintenance
There are no other parts inside the equipment which require maintenance.
Faults
The equipment does not work:
Check that the battery is charged and whether the charging unit is working. If
the equipment will not work in spite of the voltage supply being OK, please
send it to the customer service address below.
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask in your local council offi ces.
Storage
Store the equipment and its accessories out of children‘s reach in a dark and
dry place at above freezing temperature. The ideal storage temperature is
between 41°F and 86°F (5°C and 30°C). Keep the electric tool in its original
packaging.
The reprinting or reproduction by any other means, in whole or in part, of
documentation and papers accompanying the products is strictly subject to the
express consent of Eichel Germany AG.
Subject to technical changes.
www.Einhell.com
Anl_TE_CB_18_180_Li_SPK7_USA.indb 26
EH 04/2022 (01)
02.05.2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>