LG 49WL95CP-W Computer Monitor Instruction Manual
- October 30, 2023
- LG
Table of Contents
LG 49WL95CP-W Computer Monitor
Product Information
The product is a monitor with the model name 49WL9***. It contains hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. The monitor must be disposed of in authorized handling plants to reduce emissions as much as possible. The product contains various materials and components that require selective treatment, such as Printed Circuit Boards (PCB), Batteries, Mercury containing components, Liquid Crystal Displays (LCD) with a surface greater than 100 square cm,Capacitors / condensers (Containing PCB / PCT), Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height, External electric cables cords, Gas Discharge Lamps, Plastics containing Brominated Flame Retardants, Components and waste containing asbestos, Components, parts and materials containing refractory ceramic fibers, Components, parts and materials containing radioactive substances.
Product Usage Instructions
- Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/12/EU and must be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays.
- To remove batteries from the remote control, remove the back cover of the remote control first.
- To remove batteries from the PCB Assembly, remove the back cover of the product first.
- To disassemble the product to remove PCBs and LCD Module, remove the back cover of the display by hand and screwdriver. This will expose the accessible electronic units (PCBs), which can now be easily removed with hand and screwdriver. The LCD module (together with their casing) is only left after all other parts like electronic units and casing have been removed.
- To remove the power cord and signal cables, unplug the power cord from the back of the display by hand or de-attach the cables provided from the product.
- To remove capacitors > 25 mm, use a nipper to remove them from the power supply units.
Note : The disassembly process requires tools like screwdriver, nipper, and plastic Hera jig.
Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment
Product Identification
- Type of Product Monitor
- Model name 49WL9***
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/12/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Displays
Materials and components for Selective Treatment
Displays may contain hazardous substances like Pband BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants
Materials and components| Notes| Quantity of items included in
product
---|---|---
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)| With a
surface greater than 10 square cm| 1
Batteries
| For Remote control| 1
Internal batteries| 0
Mercury containing components| display backlights| 0
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm
| Includes background illuminated displays with gas discharge lamps|
1
Capacitors / condensers (Containing PCB
/ PCT)
| | 0
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| |
1
External electric cables cords
| Power cord| 1
Signal cable| 3
Gas Discharge Lamps| | 0
Plastics containing Brominated Flame Retardants| | 0
Components and waste containing asbestos| | 0
Components, parts and materials containing refractory ceramic fibers| | 0
Components, parts and materials containing radioactive substances| | 0
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
| Tool Description | Tool information |
|---|---|
| Screw driver |
Nipper|
Plastic Hera Jig|
Product Disassembly Process
Batteries
Batteriescan easily be removed from the remote control once the back cover of
the remote control has been removed.
PCBs and LCD Module
- The back cover of the display can easily be removed by hand and screw driver.
- Once removed this will expose the accessible electronic units (PCBs),
- which can now be easily removed with hand and screw driver.
- LCD module(together with their casing) is only left after all other parts like electronic units and casing have been removed
Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by
hand or cables are provided as de-attached from the product
Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by
nipper
Disassembly of Externalenclosure
- Unscrew the stand base by using coin
- Push button and lift the stand body and remove the screw(4EA)
- Overturn the set and disassemble the latches of three edges
- Disassemble the back cover
- Re-overturn the set and disaaemble screw 4EA and disassemble the PCB Monitor Only)
LCD Module
Documents / Resources
| LG
49WL95CP-W Computer
Monitor
[pdf] Instruction Manual
49WL95CP-W Computer Monitor, 49WL95CP-W, Computer Monitor, Monitor
---|---