HAMPTON BAY 2418J2-1W 24-Ft 12-Light Single Filament LED White String Light User Manual
- October 30, 2023
- HAMPTON BAY
Table of Contents
ITEM#: 1006 695 151
MODEL#: 2418J2-1W
USE AND CARE GUIDE
24-FT 12-LIGHT SINGLE FILAMENT LED WHITE STRING LIGHT
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m.- 7 p.m., EST, Monday-Friday,
9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
2418J2-1W 24-Ft 12-Light Single Filament LED White String Light
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this light fixture. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Safety Information
- Keep combustible material clear of bulbs. Do not allow bulbs or sockets to come into contact with walls, ceilings, fabrics associated with shades, blinds or other materials.
- Not intended for installation in ceilings, soffits, cabinets or other enclosed spaces.
- Not intended for lighting aquariums.
- Do not pierce the protective layers of power cables and sockets during installation. Strictly follow the instructions.
- This device is not intended for use with emergency exits.
WARNING: These products may represent a possible Shock or Fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes and/or the current National Electric Code (NEC).
WARNING: When using outdoors use portable luminaires. Basic safety
precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
a) Use only two-wire outdoor extension cords that have two-prong grounding
plugs and grounding receptacles that accept the appliance’s plug.
b) Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the
circuit(s) or outlet(s) to be used for the wet location portable luminaire.
Receptacles are available having built-in GFCI protection and are able to be
used for this measure of safety.
c) Use only with an extension cord for outdoor use, such as an extension cord
of cord type SEW, SEOW, SEOOW, SOW, SOOW, STW, STOW, STOOW, SJEW, SJEOW,
SJEOOW, SJW, SJOW, SJOOW, SUTW, SUTOW, or SUTOOW.
DANGER: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
IMPORTANT: All bulbs must be OUTDOOR rated. Use of improperly rated bulbs can result in electric shock, fire, and/or damage to product, property, or injury to self.
DO NOT use any bulb over 40 watts.
DO NOT exceed maximum number of 25 light strings when connecting multiple
strings.
DO NOT exceed maximum total capacity of 960 watts. Calculate total load by
adding up wattages used in each of the 12 sockets X number of light strings.
IMPORTANT: The maximum distance to the receptacle is determined by the
length of the cord provided and appropriate extension cord if used.
IMPORTANT SAFETY INSTRUCTIONS: This portable luminaire has a polarized
plug (one blade is wider than the other) as a feature to reduce the risk of
electric shock. This plug will fitting polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Never use with an extension cord unless
plug can be fully inserted. Do not alter the plug.
IMPORTANT: The maximum distance between interconnected units is
determined by the length of the cord provided and appropriate extension cord
if used.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS.
If you have any non-electrical questions about this fixture, please call our
Customer Service Team at 1-855-HD-HAMPTON or visit
www.HAMPTONBAY.com.
Please reference your SKU (1006 695 151) or Model (2418J2-1W).
Warranty
TWO (2) YEAR WARRANTY FOR THE UNIT, LIMITED LIFETIME WARRANTY FOR THE BULBS
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of two (2) years from date of purchase.
The manufacturer warrants the included bulbs to be free from defects in
materials and workmanship for a limited lifetime from date of purchase.
This warranty applies only to the original consumer purchaser and only to
products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alteration, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product. Contact the Customer Service Team at
1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation.
IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855-HD-HAMPTON.
USING BULBS OF DIFFERENT WATTAGES
Bulb Type| Bulb
Wattage| Maximum Number
of Light Strings
S14, Mediu
(E26) Base| 11 watts| 7 strings
A15| 15 watts| 5 strings
A19| 19 watts| 4 strings
A15 orA19| 25 watts| 3 strings
A15 orA19| 40 watts| 1 string
NOTE: Support cable and hardware not included (sold separately).
NOTE: You may use bulbs of different wattages other than those included
(sold separately). See chart below for details.
USING LED BULBS
Bulb Type| Average
Wattage| Maximum Number
of Light Strings
LED S14| 1 watts| 25 strings
LED A15| 1 watts| 25 strings
LED A19| 7-9 watts| 8 strings
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | #18 SJTW 2-Conductor Wire with attached Medium Base (E26) Socket | 1 light |
string
w/12 sockets
B| S14, Medium Base (E26)
0.9W LED Single Filament Bulbs| 12
plus 2 spares
Installation
1 Preparing for installation
- Disconnect power at the source prior to attempting to install or service the light string.
- Remove the shrink-wrap on the bulbs prior to use.
- This string light requires 120V, 50/60Hz input and each light string consumes 0.1 amps (10.8 watts) using supplied bulbs. Use only with 120V AC receptacles.
Installation
- Close plug cap on female end if not connecting multiple string lights, or last set of connected string lights. Then plug the light string into a 120V AC outlet and be sure each light bulb lights. If not, note which one(s) did not light, ALWAYS UNPLUG THE LIGHT STRING, then carefully turn the unlighted bulb(s) until they make contact with the terminal at the top of the socket. Repeat until all bulbs light up.
NOTE: Install or replace bulbs in the light string only during dry and calm weather conditions. Ambient temperatures around 18°-35°C / 65°-95°F are ideal so the light string will be more flexbile.
3 Hanging the light string
- The light string must be securely attached to a support structure at each end of each span. The maximum unsupported span distance for a commercial light string is 6.1 m/20 ft.
- Secure the light string to supporting hardware (eyebolts, brackets, etc., not included) using cable ties (not included).
- For spans exceeding 6.1 m/20 ft, use properly rated cable support system and cable ties (not included) and follow local codes for hanging structures and loads.
- Light sockets must be hung so that bulbs are facing down ONLY. DO NOT mount the light string with sockets facing upward. Bulbs should hang freely in a downward direction with a minimum of 7.6 cm/3 in. space from the nearest object. DO NOT Cluster the bulbs.
NOTE: Support cable and hardware not included (sold separately).
NOTE: Avoid damage to the insulation during installation. DO NOT pierce
or otherwise compromise outer covering of wire or socket, jacket, or
sheathing. DO NOT secure light string to buildings or other structural
supports using nails, staples or other sharp, conducting materials that may
damage the cord.
IMPORTANT: When interconnecting multiple light strings, prevent the
connection from separating. Mount to support cable or use twine or wire to
connect the first and last sockets via the mounting hole at the top of each.
Care and Cleaning
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
- To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
- Periodically inspect wire and sockets for degradation due to weather, UV light or other damage.
- Check bulbs regularly for loose, broken, or unlit bulbs. Replace the bulbs immediately. DO NOT OPERATE THE LIGHT STRING WITH ANY MISSING BULBS, DAMAGED SOCKET/S, AND/OR DAMAGED BULBS.
- To replace bulbs in the light string, unscrew existing bulbs by lightly holding the socket in one hand and twisting the bulb counterclockwise. Bulbs may be tight in the sockets. This is normal to prevert moisture from getting into the socket. Be sure to fill every socket of the light string (12 bulbs total).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The lights will not turn on. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is turned on. | |
| There is a faulty switch. | Test or replace the switch. | |
| There is a faulty wire connection. | Check the wiring. | |
| The bulb is not making contact with the terminal. | Check the position of the |
terminal inside the socket.
The fuse blows, or the circuit breaker trips, when the light is turned on.|
There are crossed wires, or the power wire is grounding out| Discontinue use
of the light string. Check the wire connections. Contact a qualified
electrician or call the Customer Care Service Team at 1-855-HD-HAMPTON.
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday,
9 a.m.-6p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.