WHADDA WSXL110 Ghastly Ghost XL Soldering Kit User Manual
- October 30, 2023
- WHADDA
Table of Contents
WHADDA WSXL110 Ghastly Ghost XL Soldering Kit
Product information
The product is a soldering kit that includes various components such as resistors, capacitors, zener diodes, IC socket, LEDs, and pin headers. The product also comes with hooks, which are optional. The kit also has an important environmental warning that the product should not be disposed of as unsorted municipal waste.
Product Usage Instructions
- Before starting to solder, visit www.whadda.com/start-to-solder for instructions on how to solder.
- Identify the components based on their labels and colors.
- Place the components on the front side of the board based on their designated location.
- Insert the IC socket into its designated location and ensure that the notch is aligned with the notch on the board.
- Insert the pin header into its designated location if external control is required.
- Solder the components onto the board one by one. Be careful not to let the solder flow between two adjacent pins.
- After soldering all the components, cut off any excess leads using a wire cutter.
- Insert the hook into its designated location if desired.
- Attach the battery or power source to the board and test if all LEDs light up.
Soldering
Follow the tutorial and learn how to solder on:
Overview
Resistor
- R1, R2: 68 ohm
- blue, grey, black
- R3: 470 ohm
- yellow, purple, brown
- R4: 10K
- brown, black, orange
- R5: 1K5
- brown, green, red
Operating Instructions
Zener diodes
- D1, D2: 3,6 V – 500 mW
Capacitors
- C1, C2: 100nF
Button
- SW1
IC socket
Pin header: optional for external control
USB connector
- SK1
LEDs
- LD1 … LD18: LED – 5 mm
LED EYES
- LD19 .. LD22: LED – 8 mm
IC
- U1 – ATtiny 85 pre-programmed
Hooks (optional)
- pre-solder
- SK3 & SK4
Disposal
TO ALL RESIDENTS OF THE EUROPEAN UNION
Important environmental information about this product
This symbol on this unit or the package, indicates that disposal of this unit after its lifecycle could harm the environment. Do not dispose the unit as unsorted municipal waste; it should be disposed by a specialized company for recycling. This unit should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If any doubt contact your local authorities about waste disposal rules.
www.whadda.com/start-to-solder