WRC GT4.2 1-8 GT Nitro Car RC Professional Instruction Manual
- October 30, 2023
- WRC
Table of Contents
- WRC GT4.2 1-8 GT Nitro Car RC Professional
- Product Information
- Product Usage Instructions
- INTRODUCTION
- GENERAL INFORMATION
- WARRANTY
- CUSTOMER SUPPORT
- TECHNICAL INFORMATION
- ITEMS NEEDED
- TOOLS REQUIRED
- PARTS DESCRIPTIONS
- Front & Rear Assembly
- Engine
- Front/Rear Shock
- Air Filter/Tyres
- ACCESORIES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WRC GT4.2 1-8 GT Nitro Car RC Professional
Product Information
The GT4 is a high-quality 1/8 scale GT nitro car designed for individuals with experience in the RC model car field who are over 16 years old. The car is supplied in a box and comes with an instruction manual that can be downloaded from www.wrc-racing.com. It weighs 3500g and has a fuel tank capacity of 150cc. The car features a two-speed gearbox and a 4 shoes expansion clutch. The width of the car is 310mm, and the wheelbase is adjustable between 315-320mm. In addition to the kit, you will need to purchase additional items such as an engine and muffler, transmitter, receiver, low profile steering servo, batteries for the transmitter and receiver, wheel-tyres-inserts, fuel and fuel pump, starter glow plug igniter, and tools required for proper assembly.
Product Usage Instructions
- Read and fully understand the instruction manual before starting to build and operate the car.
- Keep the instruction manual in a safe place where it can be consulted for reference.
- Use only original WRC spare parts.
- If you are under 16 years old or do not have experience in the RC model car field, you must have direct supervision from a knowledgeable adult responsible.
- For proper assembly, you will need to use the tools listed in the manual, which are not included in the kit.
- You will also need to purchase additional items that are required for completion of the GT4 as listed in the manual.
- If you have any problems or questions about the product, contact WRC support at info@wrc-racing.com or visit their website www.wrc-racing.com for updates, set-up information, option parts, and other information.
INTRODUCTION
- GT4 is a new generation high quality 1/8 scale GT nitro car.
- GT4 is supplied in a box,you can download the Instruction manual from www.wrc-racing.com
- Its use is intended for more than 16 years old persons with experience on rc model car field.
- Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.
SAFETY PRECAUTIONS
- Instruction Manual MUST be read and fully understood before to start building and operating functions.
- Always keep Instruction Manual in safety place, ready to be consulted for any reference you need.
- Use only original WRC spare parts.
GENERAL INFORMATION
- Assemble the kit only away from the reach of children.
- Follow the building and operating instructions using the utmost care.
- Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury.
- Check and clean the model before putting it away.
- Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic.
- The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision.
- Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model.
- Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter.
- Keep the wheels of the model off the ground when checking the operation of the radio equipment.
- Disconnect the battery pack before storing your model.
WARRANTY
- WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase.
- The total monetary value under warranty will in no case exceed the cost of the original kit purchased.
- This warranty doesn’t cover any compnents damaged by use or modification or as result of wear.
- Part or parts missing from this kit must be reported within 30 days of purchase.
- No part or parts will be sent under warranty without proof of purchase.
- If you find a defective or missing part, contact the local distributor.
- Customer service and support will be provided through local hobby store.
- No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement.
- Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use.
- This includes but is not limited to damage from crashing, excessive moistur, improper use or no maintenance or user modifications which compromise the integrity of components.
- Warranty will not cover compnents that are considered consumable on RC model car.
- WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty.
- WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:
CUSTOMER SUPPORT
Please don’t hesitate to contact WRC support at info@wrc-
racing.com for any problem or question.
Also kindly visit our website www.wrc-racing.com
to find last updates, set-up information, option parts and other information.
W.R.C. world racing car s.r.l.
- Via A. Volta 2 Bis 36040 Brendola (VI) ITALY
- Phone: 0039 0 444 1792263
- E-mail: info@wrc-racing.com
- Website: www.wrc-racing.com
TECHNICAL INFORMATION
- BRAKE: Laser cut brake disck with Ferodo brake pad
- WHEELS LOCK: Lightweight 17 mm 7075 T6 Nut
- CHASSIS: 4.0 mm Swiss 7075 T6 aluminium
- RADIO PLATE: Composite Material
- DRIVETRAIN TYPE: Spring steel CVD Driveshfts
- FRONT DIFFERENTIAL: Differential Gear
- REAR DIFFERENTIAL: Differential Gear
- SUSPENSION: Pivot ball suspension
- RIDE HEIGHT: Adjustable Front & Rear
- CAMBER: Adjustable Front & Rear
- CASTER: Adjustable Front
- TOE: Adjustable Front & Rear
- ROLLCENTER: Adjustable Front & Rear
- ACKERMANN: Adjustable Front
- ANTI-ROLL BARS: Adjustable Front & Rear
TECHNICAL DATA
- WIDTH ………………………………………310 mm
- WHEEL BASE …………adjustable 315-320 mm
- WEIGHT READY TO RUN ………………..3500g
- FUEL TANK ……………………………………..150cc
- TWO SPEED GEAR BOX
- 4 SHOES EXPANSION CLUTH
ITEMS NEEDED
ADDITIONAL ITEMS NEEDED FOR COMPLETION (REQUIRED BUT NOT INCLUDED IN THE KIT)
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
NOTICE
- THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE GT4; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
- BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY.
PARTS DESCRIPTIONS
Front Diff. Gear
Rear Diff. Gear
Rear Transmission
Front Transmission
Front Suspension
Front Upright
Rear Suspension
BAG 10
Front & Rear Assembly
Engine
Fuel Tank
Radio Case
Front/Rear Shock
Assembly 4 set
SHOCK FILLING
- Fully extend the piston rod so the piston is at the bottom of the shock body.
- Hold the shock upright and fill the shock body with shock oil as in the picture.
- Let the oil settle and allow air bubbles to rise to the top.
- Slowly move the piston up and down until no more air bubbles appear.
- Add shock oil as necessary.
- Pull the piston rod most of the way out of the shock bod.
- Let the shock rest for 5 minutes to allow the air bubbles to scape.
P- ONE SHOCKS OIL
CODE| CST
SO-400| 400
SO-500| 500
SO-600| 600
SO-700| 700
SO-800| 800
SO-1000| 1000 (IN KIT)
Rear Shock
Trottle/Brake leverage
Front Bumper
Air Filter/Tyres
ACCESORIES
Front Suspension
Rear Suspension
Shocks
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>